Cat G3408C

Gas Compression Engines

About the Cat G3408C

 

Tough and durable, built on the industry-standard G3400 platform bring maximum uptime and low operating cost to your operation. G3408C engines meet the most demanding continuous duty gas compression applications with virtually no unscheduled downtime.Ideal applications for G3408C engines include gas lift, gas gathering, and wellhead gas compression. Cat G3408C gas engine. Ratings: 317 bkW (425 bhp) @ 1800 rpm are NSPS site compliant capable with customer-provided aftertreatment or available for non-regulated areas.

Specifications

Engine Specifications
Minimum Rating 425 BHP
Maximum Rating 425 BHP
Emissions NSPS Site Compliant Capable or Non-regulated
Displacement 1099 in³
Compression Ratio 8.5:1
Aspiration Turbocharged-Aftercooled
Rotation from Flywheel End Counterclockwise
Flywheel and Flywheel Housing SAE No. 0
Flywheel Teeth 136
Weight - Dry 4950 lb
Oil Change Interval 750 hours
Ignition, Protection Cat EIS
Stroke 6 in
Bore 5.4 in
Capacity for Liquids
Cooling System 14.5 gal (US)
Lube Oil System - Refill 39 gal (US)

Features

Engine Design

Engine Design
• Improved reliability and durability • Ability to burn a wide spectrum of gaseous fuels • Robust diesel strength design prolongs life and lowers owning and operating costs• Broad operating speed range

Emissions

Emissions
Meets U.S. EPA Spark Ignited Stationary NSPS Emissions for 2007/08

Lean Burn Engine Technology

Lean Burn Engine Technology
Lean-burn engines operate with large amounts of excess air. The excess air absorbs heat during combustion reducing the combustion temperature and pressure, greatly reducing levels of NOx. Leanburn design also provides longer component life and excellent fuel consumption.

Cat® Electronic Ignition System (EIS)

Cat® Electronic Ignition System (EIS)
Detonation sensitive timing protects the engine against detonation damage. Higher voltage and longer spark duration mean easier starts, fewer misfires, and smoother operation. Diagnostic codes help pinpoint cylinder and component of interest. Spark plug maintenance codes identify spark plug condition

Ease of Operation

Ease of Operation
• Deep sump oil pan has a larger capacity for normal 750-hour oil change intervals• Side covers on block allow for inspection of internal components

Full Range of Attachments

Full Range of Attachments
Large variety of factory-installed engine attachments reduces packaging time

Testing

Testing
Every engine is full-load tested to ensure proper engine performance.

Gas Engine Rating Pro

Gas Engine Rating Pro
GERP is a PC-based program designed to provide site performance capabilities for Cat natural gas engines for the gas compression industry. GERP provides engine data for your site's altitude, ambient temperature, fuel, engine coolant heat rejection, performance data, installation drawings, spec sheets, and pump curves.

Product Support Offered Through Global Cat Dealer

Product Support Offered Through Global Cat Dealer
More than 2,200 dealer outletsCaterpillar factory-trained dealer technicians service every aspect of your petroleum engineCat parts and labor warrantyPreventive maintenance agreements available for repair-before-failure optionsS•O•SSM program matches your oil and coolant samples against Caterpillar set standards to determine:- Internal engine component condition- Presence of unwanted fluids- Presence of combustion by-products- Site-specific oil change interval

Over 80 Years of Engine Manufacturing Experience

Over 80 Years of Engine Manufacturing Experience
Over 60 years of natural gas engine productionOwnership of these manufacturing processes enables Caterpillar to produce high quality, dependable products.- Cast engine blocks, heads, cylinder liners, and flywheel housings- Machine critical components- Assemble complete engine

Web Site

Web Site
For all your petroleum power requirements, visit www.catoilandgasinfo.com

Contact

 

Please contact us for requests or advise. 

 

  • Call
  • Arrow

Request a quotation

 

250/250
Contact Close Icon - Contact Sticky Cross
  • Call
  • Arrow

CALL US

Opening hours: 08:00 - 16:00

  • Call Pon Equipment AS
    (for buyubg Cat maskines and worktools)
  •  
  • Call21 08 41 00
  •  
  • Call Pon Power AS
    (for buying Cat enginges and power supply)
  •  
  • Call23 17 05 00
  •  
  • Call Pon Rental AS
    (for renting machines and other equipment)
  •  
  • Call21 08 43 00

Email us

We will get in contact within 24 hours.

How would you like us to contact you? *
250/250

 

Fill in the form below and I will contact you as soon as possible.

 

How would you like us to contact you? *
250/250
web-monitoring-ok