Cat G3408C

Gas Compression Engines

Last ned spesifikasjoner Send Forespørsel

Om Cat G3408C

Tough and durable, built on the industry-standard G3400 platform bring maximum uptime and low operating cost to your operation. G3408C engines meet the most demanding continuous duty gas compression applications with virtually no unscheduled downtime.Ideal applications for G3408C engines include gas lift, gas gathering, and wellhead gas compression. Cat G3408C gas engine. Ratings: 317 bkW (425 bhp) @ 1800 rpm are NSPS site compliant capable with customer-provided aftertreatment or available for non-regulated areas.

Spesifikasjoner

Engine Specifications

Minimum Rating	425 BHP
Maximum Rating	425 BHP
Emissions	NSPS Site Compliant Capable or Non-regulated
Displacement	1099 in³
Compression Ratio	8.5:1
Aspiration	Turbocharged-Aftercooled
Rotation from Flywheel End	Counterclockwise
Flywheel and Flywheel Housing	SAE No. 0
Flywheel Teeth	136
Weight - Dry	4950 lb
Oil Change Interval	750 hours
Ignition, Protection	Cat EIS
Stroke	6 in
Bore	5.4 in

Capacity for Liquids

Cooling System	14.5 gal (US)
Lube Oil System - Refill	39 gal (US)

Egenskaper

Engine Design

• Improved reliability and durability • Ability to burn a wide spectrum of gaseous fuels • Robust diesel strength design prolongs life and lowers owning and operating costs• Broad operating speed range

Emissions

Meets U.S. EPA Spark Ignited Stationary NSPS Emissions for 2007/08

Lean Burn Engine Technology

Lean-burn engines operate with large amounts of excess air. The excess air absorbs heat during combustion reducing the combustion temperature and pressure, greatly reducing levels of NOx. Leanburn design also provides longer component life and excellent fuel consumption.

Cat® Electronic Ignition System (EIS)

Detonation sensitive timing protects the engine against detonation damage. Higher voltage and longer spark duration mean easier starts, fewer misfires, and smoother operation. Diagnostic codes help pinpoint cylinder and component of interest. Spark plug maintenance codes identify spark plug condition

Ease of Operation

• Deep sump oil pan has a larger capacity for normal 750-hour oil change intervals• Side covers on block allow for inspection of internal components

Full Range of Attachments

Large variety of factory-installed engine attachments reduces packaging time

Testing

Every engine is full-load tested to ensure proper engine performance.

Gas Engine Rating Pro

GERP is a PC-based program designed to provide site performance capabilities for Cat natural gas engines for the gas compression industry. GERP provides engine data for your site's altitude, ambient temperature, fuel, engine coolant heat rejection, performance data, installation drawings, spec sheets, and pump curves.

Product Support Offered Through Global Cat Dealer

More than 2,200 dealer outletsCaterpillar factory-trained dealer technicians service every aspect of your petroleum engineCat parts and labor warrantyPreventive maintenance agreements available for repair-before-failure optionsS•O•SSM program matches your oil and coolant samples against Caterpillar set standards to determine:- Internal engine component condition- Presence of unwanted fluids- Presence of combustion by-products- Site-specific oil change interval

Over 80 Years of Engine Manufacturing Experience

Over 60 years of natural gas engine productionOwnership of these manufacturing processes enables Caterpillar to produce high quality, dependable products.- Cast engine blocks, heads, cylinder liners, and flywheel housings- Machine critical components- Assemble complete engine