16M3 Motor Grader

Cat 16M3 Motor Grader

Scroll ned for at se mere

Specifikationer

Engine
Base Power (1st Gear) - Net 216 kW
Bore 130 mm
Stroke 157 mm
Base Power (1st Gear) - Net - Metric 216 kW
Derating Altitude - Tier 2/Stage II/Japan 2001 (Tier 2) Equivalent 3954 m
Derating Altitude - Tier 3/Stage IIIA/Japan 2006 (Tier 3) Equivalent 3711 m
Derating Altitude - Tier 4/Stage IV/Japan 2014 (Tier 4) 3810 m
Maximum Torque - ISO 9249 - Tier 2/Stage II/Japan 2001 (Tier 2) Equivalent 1721 N·m
Maximum Torque - ISO 9249 - Tier 3/Stage IIIA/Japan 2006 (Tier 3) Equivalent 1721 N·m
Maximum Torque - ISO 9249 - Tier 4/Stage IV/Japan 2014 (Tier 4) 1771 N·m
Standard - Ambient Capability 50 °C
Displacement 12.5 l
Power Train
Brakes - Dynamic Brake Torque per Wheel 36701 N·m
Hydraulic System
Maximum System Pressure 24750 kPa
Standby Pressure 5900 kPa
Pump Output* 280 l/min
Operating Specifications
Forward - 1st 4.5 km/h
Forward - 2nd 6.1 km/h
Forward - 3rd 8.9 km/h
Forward - 4th 12.3 km/h
Forward - 5th 19 km/h
Forward - 6th 25.8 km/h
Forward - 7th 35.5 km/h
Forward - 8th 51.7 km/h
Reverse - 1st 3.6 km/h
Reverse - 2nd 6.6 km/h
Reverse - 3rd 9.7 km/h
Reverse - 4th 15 km/h
Reverse - 5th 28 km/h
Reverse - 6th 40.8 km/h
Top Speed - Forward 51.7 km/h
Top Speed - Reverse 40.8 km/h
Turning Radius - Outside Front Tires 9.3 m
Service Refill
Fuel Capacity 496 l
Cooling System 70 l
DEF Tank 16 l
Hydraulic System - Tank 70 l
Hydraulic System - Total 146 l
Engine Oil 36 l
Transmission - Differential - Final Drives 98.5 l
Tandem Housing - Each 129 l
Front Wheel Spindle Bearing Housing 0.9 l
Circle Drive Housing 10 l
Frame
Circle - Blade Beam Thickness 50 mm
Circle - Diameter 1822 mm
Drawbar - Height 203 mm
Drawbar - Width 76 mm
Front Axle - Height to Center 670 mm
Front Frame Structure - Height 460 mm
Front Frame Structure - Thickness 14 mm
Front Frame Structure - Width 356 mm
Tandems
Sidewall Thickness - Inner 22 mm
Sidewall Thickness - Outer 22 mm
Height 648 mm
Width 236 mm
Drive Chain Pitch 63.5 mm
Wheel Axle Spacing 1841 mm
Moldboard
Blade Width 4.9 m
Arc Radius 413 mm
Throat Clearance 126 mm
Blade Pull* - Base GVW 18615 kg
Blade Pull* - Maximum GVW 23985 kg
Cutting Edge Thickness 25 mm
Cutting Edge Width 203 mm
Down Force - Base GVW 13945 kg
Down Force - Maximum GVW 19895 kg
End Bit - Thickness 19 mm
End Bit - Width 152 mm
Height 787 mm
Thickness 25 mm
Width 4.9 m
Blade Range
Maximum Lift Above Ground 400 mm
Maximum Depth of Cut 470 mm
Circle Centershift - Left 690 mm
Circle Centershift - Right 560 mm
Maximum Shoulder Reach Outside of Tires - Left 2311 mm
Maximum Shoulder Reach Outside of Tires - Right 2311 mm
Moldboard Sideshift - Left 740 mm
Moldboard Sideshift - Right 790 mm
Ripper
Ripping Depth - Maximum 452 mm
Shank Holder Spacing - Minimum 445 mm
Penetration Force 13749 kg
Pry-Out Force 19822 kg
Machine Length Increase, Beam Raised 1610 mm
Shank Holder Spacing - Maximum 500 mm
Weights
Operating Weight - Typically Equipped 32411 kg
Weights Tier 4/Stage IV/Japan 2014 (Tier 4 Final)*
Gross Vehicle Weight - Base** - Front Axle 8134 kg
Gross Vehicle Weight - Base** - Rear Axle 20682 kg
Gross Vehicle Weight - Base** - Total 28816 kg
Gross Vehicle Weight - Maximum Tested - Front Axle 11850 kg
Gross Vehicle Weight - Maximum Tested - Rear Axle 26650 kg
Gross Vehicle Weight - Maximum Tested - Total 38500 kg
Gross Vehicle Weight - Typically Equipped - Front Axle 8733 kg
Gross Vehicle Weight - Typically Equipped - Rear Axle 23678 kg
Gross Vehicle Weight - Typically Equipped - Total 32411 kg
Dimensions (Approximate)
Ground Clearance - Rear Axle 396 mm
Height - Exhaust Stack 3557 mm
Height - Front Axle Center 733 mm
Height - Top of Cab 3719 mm
Height - Top of Cylinders 3088 mm
Length - Between Tandem Axles 1841 mm
Length - Counterweight to Ripper 12051 mm
Length - Front Axle to Mid Tandem 7365 mm
Length - Front Axle to Moldboard 3066 mm
Length - Front Tire to Rear of Machine - Including Tow Hitch 10593 mm
Width - Outside Front Tires 3411 mm
Width - Outside Rear Tires 3411 mm
Width - Tire Center Lines 2703 mm
Variable Power Tier 4 Final/Stage IV/Japan 2014 (Tier 4 Final), Tier 3/Stage IIIA/Japan 2006 (Tier 3) or Tier 2/Stage II/Japan 2001 (Tier 2) - Metric
Gear - Forward 1st 216 kW
Gear - Forward 2nd 216 kW
Gear - Forward 3rd 222 kW
Gear - Forward 4th 227 kW
Gear - Forward 5th 232 kW
Gear - Forward 6th 239 kW
Gear - Forward 7th 244 kW
Gear - Forward 8th 259 kW
Gear - Reverse 1st 216 kW
Gear - Reverse 2nd 216 kW
Gear - Reverse 3rd-6th 222 kW
Variable Power Tier 4 Final/Stage IV/Japan 2014 (Tier 4 Final), Tier 3/Stage IIIA/Japan 2006 (Tier 3) or Tier 2/Stage II/Japan 2001 (Tier 2) - Net
Gear - Forward 1st 216 kW
Gear - Forward 2nd 216 kW
Gear - Forward 3rd 222 kW
Gear - Forward 4th 227 kW
Gear - Forward 5th 232 kW
Gear - Forward 6th 239 kW
Gear - Forward 7th 244 kW
Gear - Forward 8th 259 kW
Gear - Reverse 1st 216 kW
Gear - Reverse 2nd 216 kW
Gear - Reverse 3rd-6th 222 kW

Features

Operating Cost Reduction

Operating Cost Reduction
High mechanical availability is one of your top concerns. The 16M3 helps reduce downtime and operating cost through improved serviceability, fuel economy and reduced maintenance. Major components are modular in design, so most can be removed and reinstalled without disturbing other components.
  • Use Less Fuel – The C13 engine with ACERT™ Technology has been optimized to be as efficient as possible without compromising on performance. Additionally Engine Economy (ECO) Mode can be activated to control high engine idle speed and ensure the engine is performing as efficiently as possible with respect to fuel consumption offering additional fuel savings.
  • Engineered for Maximum Production and Service Life – The center shift section of the front frame is made of heavy duty steel casting which improves stress distribution to this high load area for enhanced durability. The rear frame structure is lengthened to provide easy service access to components in the engine enclosure as well as improve machine balance. Front axle steering cylinder has been designed to enhance durability and hydraulic hoses have been routed to improve reliability.
  • Ease of Maintenance – The modular cooling package makes for simple removal and installation of components on the cooling system which reduces service time. Engine enclosure doors provide complete and easy access to the engine without the impediment of any enclosure post. Also, extended maintenance intervals reduce the number of touches and downtime.
  • Protecting Your Asset – Ok to Start and critically low fluid monitoring systems help prevent critical components from damage when low fluid levels are present. All information is available via the Information Display within the cab, and diagnostic codes are logged.
C10465791

Enhanced Performance And Operator Comfort

Enhanced Performance And Operator Comfort
You measure profitability by the ore you produce – and the more cost effectively you do that, the more successful you are. While drills, draglines, loaders and haul trucks are responsible for producing ore, motor graders have a direct impact on how productively these machines can operate – in particular in their role in haul road maintenance.
  • Machine Balance – The additional weight along with adjusted weight balance offers enhanced performance for the 16M3 by improving traction and the ability to keep ground speed especially when carrying a large load.
  • Simple, Operator Friendly Emissions Technology – The 16M3 is available with three variations of the C13 engine with ACERT™ Technology. One meets U.S. EPA Tier 4 Final / EU Stage IV / Japan 2014 (Tier 4 Final) emissions standards and will be required for sale in higher regulated countries. The other options will be capable of meeting Tier 2 / State II / Japan 2001 (Tier 2) or Tier 3 / Stage IIIA / Japan 2006 (Tier 3) equivalent emission standards and are available for sale in lesser or non-regulated countries, depending on the emission standards of the specific country. Emissions reduction technology on the 16M3 Motor Grader is designed to be transparent, with no action required from the operator.
  • Comfort and Control – The multi-color / touch screen Information Display is the operator's gateway to monitoring machine performance, a convenient way of modifying machine parameters to tailor performance to the current task and access the service information for initial troubleshooting.
  • Monitor, Manage, and Enhance Job Site Operations – Cat Product Link™ Elite is deeply integrated into your machine, helping you take the guesswork out of equipment management. Easy access to timely information like machine location, hours, fuel usage, idle time and event codes via the online VisionLink® user interface can help you effectively manage your fleet and lower operating cost.
C10465788

Safety

Safety
You consider the safety of your workers a top priority, and we're doing our best to help you meet your safety goals. Caterpillar considers the safety of everyone in, on or around Cat equipment when developing new products or enhancing safety features for existing products. The 16M3 has numerous safety features such as but not limited to:
  • Access to Tandem
  • Rear View Camera
  • Seat Belt Indication
  • Access Platform – optional
  • Service Access Platform – optional
  • Fire Suppression Ready System – optional
C10465794

Dealer Support Every Step Of The Way

Dealer Support Every Step Of The Way
Your local Cat dealer is committed to helping you succeed, by ensuring you have the right machine for the job, making parts available, and providing you with versatile work tools.
C10465800

360° Exterior View (HTML)

360° Exterior view. Double click on the image to zoom in on any area of the product.

Kontakt

 

For spørgsmål og rådgivning.

Vil du vide mere om skræddersyede løsninger?

 

  • Call
  • Arrow

Brochuren er klar.

Skriv din e-mail adresse, og vi sender brochuren til dig med det samme.

 

Anmodning om tilbud

 

  • Call
  • Arrow

Send en e-mail

 

Vi svarer indenfor 24 timer.

 

Hvordan skal vi kontakte dig? *

Indkøbskurv

Vraag offerte aan