D7E Medium Track-Type Tractor

Cat D7E Track-Type Tractor

Scroll for more info about

Specifications

Engine
Flywheel Power 238 HP
Bore 4.5 in
Stroke 5.9 in
Displacement 567 in³
Engine Power - Maximum - ISO 14396 266 HP
Engine Power - Maximum - ISO 14396 (DIN) 270 HP
Engine Power - Maximum - SAE J1995 270 HP
Net Power - Maximum - ISO 9249/SAE J1349 251 HP
Net Power - Maximum - ISO 9249/SAE J1349 (DIN) 254 HP
Net Power - Rated - ISO 9249/SAE J1349 238 HP
Net Power - Rated - ISO 9249/SAE J1349 (DIN) 241 HP
Net Power - Maximum - ISO 9249 251 HP
Net Power - Maximum - ISO 9249 (DIN) 254 HP
Service Refill Capacities
Fuel Tank 108 gal (US)
Cooling System 22.5 gal (US)
Engine Crankcase 8 gal (US)
Power Train 16 gal (US)
Final Drive - Each 7 gal (US)
Pivot Shaft Compartment 1.8 gal (US)
Hydraulic Tank 20 gal (US)
Final Drive - Each - LGP 9 gal (US)
DEF Tank 4.6 gal (US)
Weights
Operating Weight 57441 lb
Shipping Weight 48402 lb
Operating Weight - STD SU 57441 lb
Shipping Weight - LGP 53649 lb
Operating Weight - LGP S 62886 lb
Hydraulic Controls - Pump
Lift Cylinder Flow 52.8 gal/min
Pump Output - Implement 52.8 gal/min
Pump Output - Steering 82.4 gal/min
Ripper Cylinder Flow 52.8 gal/min
Tilt Cylinder Flow - Head End Flow 24.6 gal/min
Tilt Cylinder Flow - Rod End Flow 17.4 gal/min
Hydraulic Controls - Main Relief Valve
Pressure Setting - Steering 4000 psi
Hydraulic Controls - Maximum Operating Pressure
Bulldozer 4000 psi
Ripper - Lift 4000 psi
Ripper - Pitch 4000 psi
Steering 5950 psi
Tilt Cylinder 4000 psi
Ripper
Beam Cross Section 14 in
Each Additional Shank 330 lb
Maximum Clearance Raised - Under Tip, Pinned in Bottom Hole 23.1 in
Maximum Penetration Force 19639 lbf
Pocket Spacing 35.4 in
Pry-Out Force 52695 lbf
Ramp Angle 26 °
Shank Gauge 70.9 in
Weight - With One Shank 3572 lb
Overall Beam Width 82.2 in
Maximum Penetration 25.6 in
Winch
Installed Weight 3350 lb
Maximum Bare Drum - Line Pull 90000 lbf
Maximum Bare Drum - Line Speed 70 ft/min
Maximum Full Drum - Line Pull 57000 lbf
Maximum Full Drum - Line Speed 116 ft/min
Overall Width 43 in
Rope Diameter - Recommended 1 in
Throat Clearance 8.6 in
Weight 3350 lb
Winch Case - Length 43.7 in
Winch Case - Width 32.5 in
Winch Length 43.9 in
Oil Capacity 3.2 gal (US)
Winch and Bracket Length 93.9 in
Increased Tractor Length - STD 93.9 in
Increased Tractor Length - LGP 93.9 in
Drum Diameter 12.5 in
Drum Width 8.9 in
Flange Diameter 24 in
Drum Capacity - 24 mm (1 in) 203 ft
Drum Capacity - 29 mm (1.13 in) 185 ft
Drive Train
AC Compressor Maximum Input Current 12 A
AC Compressor Nominal Input Voltage 320 V
AC Generator and Propulsion Module Voltage 480 V

Features

Power and Performance

Note: Productivity, efficiency and owning/operating cost compared to previous D7R2 model.
Electric Drive
A revolutionary Electric Drive system is designed to deliver quantum leaps in improved productivity and fuel efficiency. The D7E is up to 30 percent more fuel efficient than the D7R2. Better fuel economy plus greater productivity means you can move up to 35 percent more material per gallon/liter of fuel. And the D7E is more productive – moving 10 percent more material per hour. Fewer moving parts, less fuel and fluid and longer service intervals help reduce lifetime owning and operating costs.
Advanced Electronics Control the Power
Electric generator, power inverter and propulsion module replace traditional components like a torque converter and transmission. A Cat C9.3 ACERT engine turns a powerful electric generator that efficiently converts mechanical energy into AC electrical current.
Electric Propulsion Powers the Final Drives
Current from the generator flows through specially armored cables and military grade connectors to a solid-state power inverter. Advanced electronics send AC current to the propulsion module to control the motors and provides DC current for the accessory systems. The propulsion module, featuring state-of‑the-art AC electric motors, delivers well-modulated torque via axles to the final drives.
Fully Sealed and Liquid Cooled
Drive train electrical components are fully sealed, so the D7E can safely operate in a wide range of dozing conditions. Liquid cooling ensures that the electric drive components deliver peak performance in extreme-temperature conditions.
Powerful Maneuverability
Differential steering combines with electric drive to make the D7E so maneuverable that it can perform both uninterrupted power turns under load and “locked-track” pivot turns. A dedicated D8‑size steering pump delivers improved performance. The electric drive system is highly efficient at delivering engine power to the ground, and an infinitely variable speed control means smooth operations with no gears to shift.
D7E Dozer Power and Performance
Cooling System
The D7E uses a three-part, aluminum bar core radiator for charged air, jacket water and the separate circuit. The single-plane design allows for easier cleaning and a 6-fins-per-inch design helps reduce plugging. A molded shroud ensures efficient air flow and the fan utilizes lightweight, durable blades for high efficiency and quiet operation. In cooler conditions, the hydraulic demand fan reduces speed to conserve power, save fuel and decrease sound levels. An optional reversing fan is available for high debris conditions.
Traction Control
New standard feature reduces track slip for improved productivity and reduced undercarriage wear.
C10211083
Stable Blade Control
Standard Stable Blade Control complements operator input to automatically make instantaneous adjustments for smoother grading results with less effort.
Economy Mode
When in use, Economy Mode automatically adjusts engine speed when machine is not under load to save you fuel. The operator's selected machine speed is maintained.
C10211198
Load Sensing Hydraulics
Field-proven system senses the load and continuously adjusts hydraulic power to maximize your work tool efficiency.

Operator Environment

The D7E features a quiet, spacious cab. The center-post design gives you outstanding visibility all around the machine to help operators work more confidently and safely. Operators can also enjoy added comforts like manually adjustable armrests and a heated/ventilated seat option. The in-dash display monitors machine conditions in real time. Mount a grade control system display in the dash to put working information conveniently in front of the operator. A new in-cab main fall/cross slope display shows you real-time grade percentage during slope work. A single-unit cab-mounted heating, ventilation and air conditioning (HVAC) system is self contained and powered by the accessory power converter for more efficient cooling.
D7E Dozer Operator Environment
Implement and Steering Controls
  • Ergonomic controls are fully adjustable and designed for low-effort comfort. Switches and controls for various systems are located within easy reach of the operator.
  • Speed recall feature allows operators to pre-set the desired forward and reverse travel speed, and then resume that speed simply by pressing a button.
  • Implement Lock-Out prevents inadvertent operation of hydraulic attachments.
C10210741

Emissions Technology

Emissions reduction technology on the D7E is designed to be transparent, with no action required from the operator. Regeneration runs automatically in the background while you work.
D7E Dozer Emissions Technology
Aftertreatment Technologies
Caterpillar designed earlier models with Tier 4 Final/Stage IV/Japan 2014 (Tier 4 Final) standards in mind. To meet the additional 80 percent reduction in NOx emissions, Caterpillar engineers added Selective Catalytic Reduction (SCR) to the already proven aftertreatment solution.
C10286324
Diesel Exhaust Fluid
Selective Catalytic Reduction utilizes Diesel Exhaust Fluid (DEF), which can be conveniently refilled when you refuel. A gauge on the dash shows your fluid level. The D7E offers excellent fluid efficiency. Across a variety of applications, the D7E typically has used DEF at a rate of 2-2.5 percent of fuel consumption. When the machine is turned off, a pump will automatically purge the DEF lines to help prevent freezing. A symbol on the dash and a light/symbol on the Ground Level Service Center indicate when the purge is complete and that it is safe to turn off the electrical disconnect. If the engine/aftertreatment temperatures are high, a Delayed Engine Shutdown will activate automatically to cool the machine and then purge the lines. For complete aftertreatment information, please refer to your machine's Operation and Maintenance Manual.
C10210855

Integrated Technologies

Cat Connect makes smart use of technology and services to improve your job site efficiency. Using the data from technology equipped machines, you'll get more information and insight into your equipment and operations than ever before. Cat Connect technologies offer improvements in these key areas: Equipment Management – increase uptime and reduce operating costs. Productivity – monitor production and manage job site efficiency. Safety – enhance job site awareness to keep your people and equipment safe. Featured Cat Connect technologies include:
D7E Dozer Integrated Technologies
LINK Technologies
LINK technologies wirelessly connect you to your equipment giving you access to essential information you need to know to run your business. LINK data can give you valuable insight into how your machine or fleet is performing so you can make timely, fact-based decisions that can boost job site efficiency and productivity.
C10128348
Product Link/VisionLink
Product Link is deeply integrated into your machine, helping you take the guesswork out of equipment management. Easy access to timely information like machine location, hours, fuel usage, idle time and event codes via the online VisionLink user interface can help you effectively manage your fleet and lower operating costs.
C770252
GRADE Technologies
GRADE technologies combine digital design data, in-cab guidance, and automatic controls to enhance grading accuracy, reduce rework, and lower costs related to production earthmoving and rough, fine and finish grade applications.
Cat AccuGrade
AccuGrade is a dealer-installed aftermarket grade control system that provides higher accuracy capabilities by adding laser, GPS and UTS technology when required. The factory AccuGrade Ready Option provides optimal mounting locations, brackets, and hardware and simplifies installation. Deep Integration optimizes machine and system performance to maximize productivity.
C10211105

Equipped for the Job

The D7E features a robust, single lift cylinder design. L-shaped push arms give you an advantage over diagonal brace designs by bringing the blade closer to the machine. This gives you better balance, stability, maneuverability and blade penetration.
D7E Dozer Special Arrangements
Blades
Semi-Universal, Universal, Straight and Angle blades are designed with a strong box section to stand up to the most severe applications. Heavy moldboard construction, hardened bolt-on cutting edges and end bits add strength and durability. Dual Tilt option is available on S/SU/U blades for more productive dozing. Specialty blades are also available for waste, coal and wood chip applications.
Undercarriage
The D7E undercarriage is designed for performance in a wide range of applications. Enhanced visibility, especially to the sides, is only one of the many benefits of this highly efficient undercarriage system. D10-size sprocket bearings offer added durability. Shock loads are directed through the roller frame to reduce wear and tear on the machine – and on the operator. The Heavy Duty undercarriage components are designed for extended wear life in abrasive conditions and rocky or uneven terrain. Choose a Standard arrangement for versatility in a variety of soil conditions, or the Low Ground Pressure (LGP) configuration with increased track contact area for improved stability and excellent flotation in soft ground conditions.
C10211111
Rear Implements
To help you match your dozer to the task at hand, you can outfit your D7E with a multi-shank ripper, winch, drawbar or rear counterweight. Ask your Cat dealer for available options to help you optimize your machine for the work you do.
C634930

Special Arrangements

The D7E is especially popular in Waste and Stockpile applications because of its maneuverability and demonstrated fuel efficiency advantages. Equip your purpose-built machine from the factory to handle the unique challenges of landfill, coal and wood chip work. Special blades and track shoe offerings let you optimize the machine for the job.
D7E Dozer Special Arrangements
D7E WH LGP Waste Handler
  • Specialized guarding, striker bars and seals help protect the machine from impact and airborne debris.
  • Purpose-built heavy duty final drive guarding help prevent wire, cables, rope and debris from wrapping into the final drive seals.
  • Heavy duty sealed bottom guards protect the engine and power train system.
  • Reversing fan and single plane cooling cores with 6 fins per inch are ideal for high debris environments. Easy access clean out.
  • Insulated Clean Emissions Module for thermal protection.
  • Lights are mounted up and away from main debris area for protection, while still giving you plenty of light on the work area.
  • Specialized air handling features help deliver cleaner air to the machine and to the cab.
D7E Stockpile
  • Specialized guarding and seals help protect the machine from damage and debris build-up.
  • Single-plane cooling package for cooling efficiency, reduced plugging and easier clean-out. Hydraulic demand fan offers efficient cooling and reverses to reject debris.
  • Insulated Clean Emissions Module and thermal shields.
  • Additional features like a turbine precleaner and roof-mounted filter help protect both the machine and the operator in high debris conditions.

Serviceability and Customer Support

Ease of Service
The D7E redefines serviceability. With easy access to service points, fewer moving parts and longer service intervals, the D7E can significantly reduce total owning and operating costs. A tilt cab allows easy access to modular major components, such as generator, propulsion module, power electronics and hydraulics. The heating, ventilation and air conditioning (HVAC) system is self contained for improved performance, increased service intervals and ease of serviceability. Service points are grouped on the left side of the machine for quick and easy routine maintenance. Ground-level sight gauges let you inspect fluid levels at a glance. Modular final drives can be easily accessed for maintenance. The optional high-speed oil change attachment can help make servicing even faster. And for quick undercarriage cleanouts on the go, a new shovel mounting bracket has been added to the back of the machine.
D7E Dozer Serviceability and Customer Support
Ground Level Service Center
You can reach the ground level service center on the left fender without setting foot on the machine, giving easy access to the battery disconnect, hour meter, remote engine shutdown and access light switches. It also houses an LED warning indicator showing that the power train and accessory systems are energized. When the systems are de‑energized and safe for maintenance, the indicator turns off.
C10210824
Cat EMSolutions (Equipment Management Solutions)
EMSolutions lets you take control of your fleet with a solution specific to your equipment management needs. Comprehensive, technology-enabled equipment management – combined with the knowledge and expertise of your Cat dealer – can provide ways to help you achieve gains that go straight to your bottom line.
  • Improve availability
  • Reduce owning and operating costs
  • Streamline maintenance practices
  • Maximize equipment life
  • Increase resale value
Consisting of five levels of support, from remote access to equipment data to complete, proactive management of your fleet, EMSolutions allows you to choose the amount of support that's right for you.
C10211201
Renowned Cat Dealer Support
Knowledgeable Cat dealers have a global reputation for providing outstanding sales and service. Maximize your equipment investment with a Customer Support Agreement tailored to meet your business needs. Take advantage of preventive maintenance programs like Custom Track Service, Scheduled Oil Sampling (S·O·SSM) analysis, and guaranteed maintenance contracts. Cat dealers can even help you with operator training to help boost your profits. When you need repairs, Cat dealers and our unmatched Caterpillar distribution network excel at getting you the right parts you need quickly. Many times the right part is a genuine Cat Reman part. Remanufactured parts offer you the same warranty and reliability as new parts at a fraction of the cost. The breadth of the Reman offering ensures cost effective repairs or rebuilds of your engine and hydraulic components on the D7E. Rebuilt electric drive components such as the APC and Inverter are also currently available with additional options in the works. Caterpillar strives to provide customers the lowest owning and operating costs over the life of their machine.
C807756

Safety

        
  • New pull-down ladder provides convenient access for fueling and to the back of the machine.
  •     
  • New seat belt indicator registers a fault code through Product Link if the operator fails to buckle up, helping to improve your job site safety.
  •     
  • Center-post cab with angled doors offers excellent visibility to help operators work more safely.
  •     
  • Rear vision camera is available to enhance visibility behind the machine.
  •     
  • Standard Operator Presence detection system allows the machine to idle when the operator is not seated, but locks out the power train and front implements to avoid unintentional movement.
  •     
  • Convenient steps and handles help you get on and off the tractor with greater ease. Access lighting can be turned on from a ground level switch.
D7E Dozer Safety

Sustainability

        
  • Meets Tier 4 Final/Stage IV/Japan 2014 (Tier 4 Final) emission standards.
  •     
  • Up to 30 percent more fuel efficient than the D7R2. Efficient use of Diesel Exhaust Fluid (DEF) gives you excellent overall fluid efficiency.
  •     
  • In the first four years of production, D7E customers saved more than 13.25 million liters (3.5 million gallons) of diesel fuel compared to the D7R2. Significant fuel savings means reduced emissions and lower costs.
  •     
  • The D7E earned a 2009 Clean Air Excellence Award from the U.S. Environmental Protection Agency.
  •     
  • Major components are built to be rebuilt, reducing waste and saving you money by giving your dozer a second – and even third – life.
D7E Dozer Sustainability

360° Exterior View (HTML)

360° Exterior view. Double click on the image to zoom in on any area of the product.

Contact

 

Contact us for any advise.

More about tailor made solutions?

 

  • Call
  • Arrow

The brochure is ready.

Just fill in your email adress and we'll send you the brochure immediately.

 

  • Call
  • Arrow

Email us

 

We will make contact within 24 hours.

 

How would you like us to contact you?
Department

Shopping cart