Cat D6N WH Waste Handler


Scroll for more info about


Flywheel Power 182 HP
Bore 4.1 in
Stroke 5.3 in
Displacement 433 in³
Net Power - 1,800 rpm - ISO 9249/SAE J1349 166 HP
Net Power - 1,800 rpm - ISO 9249/SAE J1349 (DIN) 168 HP
Net Power - Maximum - ISO 14396 at 2,200 rpm 178 HP
Net Power - Maximum - SAE J1995 at 2,200 rpm 182 HP
Net Power - Maximum - ISO 14396 (DIN) at 2,200 rpm 180 HP
Operating Weight 40818 lb
Operating Weight - LGP Waste Handler 44749 lb
Operating Weight - XL Waste Handler 40818 lb
Shipping Weight - LGP Waste Handler 43642 lb
Shipping Weight - XL Waste Handler 40029 lb
Dimensions - LGP
Ground Clearance 18.8 in
Ground Pressure 4.5 psi
Height - Grouser 2.2 in
Length - Basic Tractor - With Drawbar* 166.2 in
Length - Track on Ground 122.7 in
Machine Height - Grouser Tip - Exhaust Stack 126.9 in
Track Gauge 85 in
Width - Tractor - Without Trunnions 118 in
Dimensions - XL
Ground Clearance 14.3 in
Ground Pressure 6.7 psi
Height - Grouser 2.6 in
Length - Basic Tractor - With Drawbar* 157.3 in
Length - Track on Ground 101.6 in
Machine Height - Grouser Tip - Exhaust Stack 122.4 in
Track Gauge 74.4 in
Width - Tractor - Without Trunnions 98.4 in
Blades - Capacity (SAE J1265)
LGP VPAT 5.1 yd³
LGP VPAT - Landfill* 7.39 yd³
XL SU 5.6 yd³
XL VPAT 4.3 yd³
XL VPAT Landfill* 8.29 yd³
Blades - Width - Over End Bits
LGP VPAT 13.38 ft
LGP VPAT - Landfill* 12.89 ft
XL SU 10.33 ft
XL VPAT 10.75 ft
XL VPAT Landfill* 10.23 ft
0.5 Forward 1.6 mile/h
0.5 Reverse 1.9 mile/h
0.7 Forward 1.7 mile/h
0.7 Reverse 2.1 mile/h
1.5 Forward 2.7 mile/h
1.5 Reverse 3.4 mile/h
1.7 Forward 3 mile/h
1.7 Reverse 3.7 mile/h
2.5 Forward 4.7 mile/h
2.5 Reverse 5.9 mile/h
2.7 Forward 5.2 mile/h
2.7 Reverse 6.5 mile/h
1.0 Forward 2.1 mile/h
2.0 Forward 3.6 mile/h
3.0 Forward 6.1 mile/h
1.0 Reverse 2.5 mile/h
2.0 Reverse 4.4 mile/h
3.0 Reverse 7.6 mile/h



  • Specialized guarding throughout the machine helps protect major components like the chassis, fuel tank and hydraulic tank from impact and airborne debris.
  • Multi-layer final drive guards help keep dirt and debris away from the Duo-Cone™ seal to protect final drive oil.
  • Pivot shaft seal guards to help prevent debris from entering and damaging seals.
  • Striker bars help prevent debris from damaging the machine, and added seals help reduce the amount of material entering engine and transmission compartments.
  • Tilt cylinder with rotating bushing type design help wrapping materials to roll off hoses.
  • Heavy duty hinged radiator guard protects radiator and fan from penetration by material coming straight in or from under the blade.
  • Cooling system designed for high debris environments, with automatic reversing fan and swing-out access for cleanout.
  • Laminated thermal shields and insulated Clean Emissions Module.
  • Hinged belly guard for easy cleaning.
  • Landfill blades and center-hole track shoes help you optimize your waste handler for the job.
  • Lights mounted up and away from main debris area for protection, while still giving you plenty of light on the work area.


  • New transmission with a lock-up clutch torque converter automatically selects the drive mode best suited to your application.
  • Up to 15% improvement in fuel efficiency and 10% more productivity* in most applications.
  • Enhanced Auto Shift (Standard) helps save fuel by automatically upshifting/downshifting to maintain the most efficient gear based on load. Three different settings, 3-speed, 6-speed and fine adjustment mode, allow you to optimize tractor performance for waste applications.
  • Comfortable, quiet operator station with excellent visibility and air handling features to help keep dust out/provide air filtration.
  • Low effort, responsive controls for precision and ease of operation.
  • Selectable electro-hydraulic maps let you set implement response to match operator preferences and application.
  • Rear vision camera available to enhance visibility behind the machine.
  • Meets U.S. EPA Tier 4 Final/EU Stage IV/Korea Tier 4 Final emission standards with emissions technology that is transparent – no action required from the operator, no stopping for regeneration.
*Compared to previous D6N model.

Cat Connect Technology

Cat Connect Technology
  • Cat GRADE with Slope Assist (Standard) automatically maintains pre-established blade angles to save time, increase finish quality and reduce operator effort, especially for cover work. Experienced operators can work more productively; less experienced operators can achieve better quality results more quickly.
  • Cat Slope Indicate (Standard) shows cross slope and mainfall on the primary machine display to help operators work more confidently.
  • Cat GRADE with 3D (Optional – available late 2016) is an integrated grade control system that helps operators grade with more accuracy and efficiency. Antennas mount on top of the cab – not on the blade – so they are safely out of the way of landfill debris.
  • Cat AccuGrade™ (Optional) machine control and guidance option helps operators improve productivity and accuracy by as much as 50% over conventional methods.
  • Cat AccuGrade Ready Option (ARO) (Optional) allows you to easily install or upgrade to Cat AccuGrade 2D and 3D grade-control systems to add versatility and resale value to your machine.
  • Remote monitoring with Product Link™/VisionLink® helps you manage your fleet more effectively and profitably.



Contact us for any advise.



  • Call
  • Arrow

The brochure is ready.

Just fill in your email adress and we'll send you the brochure immediately.


Request a quotation


  • Call
  • Arrow

Call us


Send us an e-mail

How would you like us to contact you? *
Department *