14M3 Motor Grader

Cat 14M3 Motor Grader

Scroll for more info about

Specifications

Engine
Base Power (1st Gear) - Net 238 HP
Bore 5.1 in
Stroke 6.2 in
Maximum Altitude - Full Power 13900 ft
Maximum Altitude - Full Power (Tier 2) 12049 ft
Maximum Altitude - Full Power (Tier 3) 14349 ft
Maximum Torque - VHP Plus 1137 lb/ft
Standard Capability 122 °F
Displacement 763 in³
Frame
Circle - Outer Diameter 71.7 in
Moldboard
Blade Width 14 ft
Arc Radius 16.3 in
Throat Clearance 4.6 in
Blade Height - With Cutting Edge 24.9 in
Blade Height - Without Cutting Edge 23 in
Blade Width - With End Bits 169 in
Blade Width - Without End Bits 164 in
Blade Range
Maximum Depth of Cut 23.3 in
Circle Centershift - Left 25.6 in
Circle Centershift - Right 20.5 in
Maximum Lift Above Ground 16.5 in
Maximum Shoulder Reach Outside of Tires - Left 73.6 in
Maximum Shoulder Reach Outside of Tires - Right 78.9 in
Moldboard Sideshift - Left 29.1 in
Moldboard Sideshift - Right 31.1 in
Weights
Operating Weight - Typically Equipped 57250 lb
Gross Vehicle Weight - Base* - Front Axle 13994 lb
Gross Vehicle Weight - Base* - Rear Axle 36994 lb
Gross Vehicle Weight - Base* - Total 50980 lb
Gross Vehicle Weight - Typically Equipped - Front Axle 15245 lb
Gross Vehicle Weight - Typically Equipped - Rear Axle 42005 lb
Gross Vehicle Weight - Typically Equipped - Total 57250 lb

Features

Technology

Technology
  • Optional Stable Blade improves grading precision by decreasing engine speed at 15 percent intervals when machine bounce is detected then increases engine rpm systematically when grader stabilizes.
  • Optional Cat GRADE with Cross Slope helps maintain desired cross slope by automatically controlling one side of the blade.
  • Optional Cat AccuGrade™ uses positioning and guidance technologies, machine sensors, and automatic blade control to help get to grade faster, easier, and more efficiently.
  • Optional Auto Articulation allows you to articulate automatically while steering in tight spaces or around curves, obstacles, and turnarounds.
C10476717

Performance

Performance
        
  • Cat C13 ACERT™ engine meets U.S. EPA Tier 4 Final/EU Stage IV, Tier 3/Stage IIIA equivalent or Tier 2/Stage II equivalent emission standards, depending on emission standards of specific country.
  •     
  • Standard Economy Mode can be turned on to limit maximum engine speed which helps reduce fuel consumption.
  •     
  • Standard VHP Plus provides ideal amount of power in all gears.
  •     
  • Standard Automatic Differential Lock unlocks differential during a turn and re-locks when straight for easier operation and improved power train protection.
14M3 Motor Grader Performance

Efficiency

Efficiency
        
  • Load-sensing system and advanced electrohydraulics give operator superior implement control and hydraulic performance.
  •     
  • Proportional Priority Pressure-Compensating valves have different flow rates for head and rod ends of cylinder so machine responds consistently and predictably.
  •     
  • Balanced hydraulic flow is proportioned to ensure all implements will operate simultaneously without slowing engine or speed of some implements.
14M3 Motor Grader Efficiency

Ease of Operation

Ease of Operation
        
  • Simple, intuitive joystick controls replace levers, so hand and arm movement is reduced by 78%, helping reduce operator fatigue.
  •     
  • Optional Advanced Control Joysticks allow operator to control automated grading solutions efficiently and safely without removing hands from the joysticks.
  •     
  • Selectable blade lift modes – Fine, Normal, or Coarse – allow operator to match application requirements.
  •     
  • Articulation Return-to-Center automatically returns machine to a straight frame position from any angle with the touch of a button.
14M3 Motor Grader Ease of Operation

Safety

Safety
        
  • Optional rear vision camera enhances sight to rear of machine.
  •     
  • Electrical disconnect and engine shutoff switches are ground level.
  •     
  • Operator Presence System keeps parking brake engaged and hydraulic implements disabled until operator is seated and machine is ready for operation.
  •     
  • Hydraulic Lockout disables all implement functions while still providing machine steering control – especially useful while roading.
  •     
  • Optional seat belt indicator promotes safe operating habits.
14M3 Motor Grader Safety

Serviceability

Serviceability
        
  • Convenient access from the top of the circle to the patented top-adjust wear strips and inserts make them easy to add or replace.
  •     
  • Shimless Moldboard Retention System uses vertical and horizontal adjusting screws to keep moldboard wear strips aligned for reduced blade chatter and precise blade control.
14M3 Motor Grader Serviceability

360° Exterior View (HTML)

360° Exterior View. Double click on the image to zoom in on any of the products.

Contact

 

Contact us for any advise.

More about tailor made solutions?

 

  • Call
  • Arrow

The brochure is ready.

Just fill in your email adress and we'll send you the brochure immediately.

 

  • Call
  • Arrow

Email us

 

We will make contact within 24 hours.

 

How would you like us to contact you?
Department

Shopping cart