Cat MH3040

Materialhåndterere

Maskinvekt: ca 39 tonn 
Nettoeffekt: 152 kW / 204 hk

Nyhet

Om Cat MH3040

 

Cat MH3040 materialhåndterer bygger på arven til M325D L MH for å gi kraften og påliteligheten du trenger for å takle krevende forhold og bruksområder som industriavfall, avfallsresirkulering og bulkhåndtering. ​Et nytt førerhus sammen med opptil 25% reduserte drivstoffkostnader og opptil 20% reduserte vedlikeholdskostnader kombinert med påviste komponenter for å gi deg neste generasjon Cat materialhåndterere.

Spesifikasjoner

Motor
Motormodel Cat C7.1
Transmission
Maximum Gradeability 43.80%
Weights
Note Operating weight includes full fuel tank, operator, grapple 2000 kg (4,410 lb), and single tires. Weight varies depending on configuration.
Dimensjoner
Boom MH 9.3 m (30'6")
Stick 7.1 m (23'3")
Working Ranges
Boom MH 9.3 m (30'6")
Stick 7.1 m (23'3")

Egenskaper

RELIABILITY AND DURABILITY YOU CAN COUNT ON

RELIABILITY AND DURABILITY YOU CAN COUNT ON
  • Count on your machine to withstand wear throughout the years. Boom, sticks, and other high-stress areas are reinforced with thick multi-plate fabrications, castings, and forgings to ensure quality and reliability.
  • The upper frame uses specially designed mountings to support the heavy-duty cab, and the lower frame is reinforced to enhance component durability.
  • Work up to 3000 m (9,840 ft) above sea level without de-rating.
  • Don’t let the temperature stop you from working. The MH3040 has a standard high-ambient temperature capability of 43°C (109°F) and cold start capability of -20°C (-4°F). Consult your Caterpillar dealer for additional information on special Configurations of your machine.
  • Auto warm-up speeds up hydraulic oil warming in cold temperatures and helps prolong the life of components.
BETROUWBAARHEID EN DUURZAAMHEID WAAROP U KUNT VERTROUWEN

HIGH PERFORMANCE WITH LOWER FUEL CONSUMPTION

HIGH PERFORMANCE WITH LOWER FUEL CONSUMPTION
  • Use up to 25 percent less fuel than the M325D L MH in similar applications.
  • The C7.1 engine can run on biodiesel up to B20 and meets U.S. EPA Tier 4 Final and EU Stage V emission standards with an aftertreatment system that requires no maintenance or downtime.
  • The advanced hydraulic system provides the optimum balance of power and efficiency while giving you the control you need.
  • Valve priority puts hydraulic pressure and flow where you need it.
  • Boost lifting capabilities and improve the controllability of heavy loads with heavy lift mode.
  • Match your machine to the job with selectable power modes. Let Smart mode automatically match engine and hydraulic power to working conditions. Power mode constantly provides maximum productivity.
  • Standard Product Link™ collects data automatically and accurately from your assets – any type and any brand. Information such as location, hours, fuel usage, productivity, idle time, maintenance alerts, diagnostic codes, and machine health can be viewed online through web and mobile applications.
MET GROOT PRESTATIEVERMOGEN EN EEN LAGER BRANDSTOFVERBRUIK

SUPERIOR SERVICEABILITY

SUPERIOR SERVICEABILITY
  • Expect up to 20 percent lower maintenance costs than the M325D L MH.
  • Track your machine’s filter life and maintenance intervals via the in-cab monitor.
  • No required maintenance on the Cat Clean Emissions Module.
  • Change all fuel filters at a synchronized 1,000 hours.
  • Expect the new air intake filter with precleaner to last up to 1,000 hours.
  • The new hydraulic oil filter provides improved filtration performance, anti-drain valves to keep oil clean when the filter is replaced, and longer life with a 3,000-hour replacement interval – 50 percent longer than previous filter designs.
  • High-efficiency, electrically driven cooling fans run only when needed; you can program intervals, so they automatically reverse to keep cores clean without interrupting your work.
  • Fine mesh protects the cooling hood from dust and debris.
  • S·O·SSM ports simplify maintenance and allow for quick, easy extraction of fluid samples for analysis.
ONGEKEND ONDERHOUDSGEMAK

WORK IN COMFORT IN THE ALL-NEW CAB

WORK IN COMFORT IN THE ALL-NEW CAB
  • The wide seat adjusts for operators of all sizes.
  • Get in and out of the cab easier using the tip-up left console.
  • Control the machine comfortably with easy-to-reach controls all located in front of you.
  • Standard automatic climate control keeps you at the right temperature all shift long.
  • Stow your gear with plenty of in-cab storage beneath and behind the seat, overhead, and in the consoles. A cup holder, document holder, bottle holder, and coat hook are also provided.
  • Use the standard radio’s USB ports and Bluetooth® technology to connect to personal devices.
WERK COMFORTABEL IN DE COMPLEET NIEUWE CABINE

VERSATILITY KEEPS YOU PRODUCTIVE AND PROFITABLE

VERSATILITY KEEPS YOU PRODUCTIVE AND PROFITABLE
  • Equip your MH3040 with an optional 20kW generator for magnet operation.
  • Match your machine to the application. Multiple configurations allow you to customize your machine for millyard, scrap, and log loading applications.
  • Expand your work capabilities with attachments for a variety of applications.
VEELZIJDIGHEID HOUDT U PRODUCTIEF EN WINSTGEVEND

SAFETY

SAFETY
  • Keep your machine secure with Operator ID. Use your PIN code on the monitor to enable the pushbutton starting feature.
  • Enjoy all-around great visibility with the help of smaller cab pillars, larger windows, and a flat engine hood design. Rearview and right-hand side-view cameras are standard.
  • Joystick steering eliminates the steering column, improving front visibility and increasing cab entrance width.
  • New service platform design provides easy, safe, and quick access to the upper service platform; the service platform steps use anti-skid punch plate to prevent slipping.
  • The standard hydraulic lockout lever isolates all hydraulic and travel functions in the lowered position.
  • Optional Falling Object Guard System (FOGS) provides protection from falling and flying debris.
  • Ground-level shutoff switch stops all fuel to the engine when activated and shuts down the machine.
  • Boom and stick lowering check valves prevent reverse flow, keeping your front linkage securely in place should the hydraulic system unexpectedly lose power.
VEILIGHEID

Se produktet i 360°

Drag your mouse to rotate the product

Kontakt

 

Ta kontakt hvis du har spørsmål.

 

  • Call
  • Arrow

 

OSLO

Bølerveien 60
N-2020 Skedsmokorset

Pon Equipment: +47 21 08 41 00
Pon Rental:         +47 21 08 43 00
E-post:                 [email protected]

Send meg et tilbud. 

250/250
Jeg ønsker å motta nyhetsbrev fra Pon.
Kontakt Tilbake Icon - Contact Sticky Cross
  • Call
  • Arrow

Ring oss

Send oss en e-post

Hvordan foretrekker du at vi kontakter deg? *
250/250

 

ELLER FYLL UT SKJEMA HER:

 

Fyll ut skjemaet nedenfor, så kontakter jeg deg så snart som mulig.

 

Hvordan vil du at vi skal kontakte deg? *
250/250
web-monitoring-ok