Cat 910

Kompakte hjullastere

Maskinvekt: 8450 kg
Skuffestørrelse: 1,9 m3
Bruttoeffekt: 82 kw/ 110 hk

Om Cat 910


The Cat® 910 Compact Wheel Loader features a C3.6 engine, the Cat Optimized Z-bar Loader linkage, various work tools, a state-of-the-art electro-hydraulic system, a tuned drivetrain, a cab with all-around visibility, extended service intervals and excellent service access, and standard fuel savings features.

Cat 910


Cat kompakthjullaster gir god sikt rundt lasting og løfting, og med god styrke og høy kapasitet får du gjort jobben skikkelig. 



Rated Net Power - Rated Engine Speed 2200 r/min
Maximum Gross Power - Rated Engine Speed 1800 r/min
Rated Net Power - SAE J1349 74 kW
Maximum Gross Power - ISO 14396 (metric) 112 HP
Rated Net Power - ISO 9249 73 kW
Maximum Gross Torque - SAE J1995 454 N·m
Maximum Gross Torque - ISO 14396 450 N·m
Maximum Net Torque - SAE J1349 446 N·m
Maximum Net Torque - ISO 9249 443 N·m
Displacement 3.6 l
Bore 98 mm
Stroke 120 mm
Motormodel Cat C3.6
Emissions Engine meets Tier 4 Final/Stage V emission standards.
Note Net power advertised is the power available at the flywheel plus front drive implement pump when the engine is equipped with fan, air cleaner, muffler and alternator.
Maximum Gross Power - ISO 14396 82 kW
Maximum Gross Power 82 kW
Bucket Capacities - General Purpose 1.3-1.9 m³ (1.7-2.5 yd³)
Bucket Capacities - Light Material 2.5-3.5 m³ (3.3-4.6 yd³)
Bucket Capacities 1.3-1.9 m3 (1.7-2.5 yd3)
Operating Weight 8109 kg
Maximum Working Pressure - Steering Pump 18500 kPa
Steering Articulation Angle - Each Direction 40 °
Steering Cycle Times - Full Left to Full Right - At 2,350 rpm: 90 rpm Steering Wheel Speed 3.2 s
Maximum Flow - Steering Pump 66 l/min
Number of Steering Wheel Turns - Full Left to Full Right or Full Right to Full Left 3.75 turns
Loader Hydraulic System
Hydraulic Cycle Time - Dump, at Maximum Reach 1.4 s
Hydraulic Cycle Time - Total Cycle Time 12.5 s
Maximum Working Pressure - Implement Pump 23500 kPa
Relief Pressure - Tilt Cylinder 34000 kPa
Hydraulic Cycle Time - Rackback 2.2 s
Relief Pressure - Tilt Cylinder - 3rd Function Maximum Working Pressure 21000 kPa
Hydraulic Cycle Time - Raise, Ground Level to Maximum Lift 5.2 s
Maximum Flow - Implement Pump 122 l/min
Relief Pressure - Tilt Cylinder - 4th Function Maximum Working Pressure 21000 kPa
Maximum Flow - Implement Pump - 4th Function, Maximum Flow 90 l/min
Maximum Flow - Implement Pump - 3rd Function, Maximum Flow 90 l/min
Hydraulic Cycle Time - Float Down, Maximum Lift to Ground Level 3.7 s
Cooling System 21.5 l
Drivstofftank 165 l
Hydraulic System - Including Tank 98 l
Hydraulic Tank 55 l
Transmission 3.2 l
Note DEF used in Cat SCR systems must meet the requirements outlined in the International Organization for Standardization (ISO) standard 22241-1.
Axles - Front Center Differential 7.5 l
Axles - Rear Center Differential 7.5 l
Engine Crankcase 10 l
Diesel Exhaust Fluid (DEF) Tank 18 l
Note *Creeper Control allows speed control from a stand still up to 10 km/h (6.3 mph). The Creeper Control will only work in Range 1.
Forward and Reverse - Speed Range 3 40 km/h
Forward and Reverse - Speed Range 2* 20 km/h
Forward and Reverse - Speed Range 1* 10 km/h
Note (2) In certain applications, the loader’s productive capabilities may exceed the tire’s tonnes-km/h (ton-mph) capabilities.
Standard Size 15.5 R25 L2 XTLA
Other Choices Include 17.5 R25 L2 XTLA; 15.5 R25 L3 XHA2; 17.5 R25 L3 XHA2; 17.5-25 L2/L3 SGL; 17.5-25 L3 HRL D/L-3A; 17.5 R25 L2 Snow
Note (3) Caterpillar recommends that you consult a tire supplier to evaluate all conditions before selecting a tire model.
Note (1) Other tire choices are available. Contact your Cat dealer for details.
ROPS ISO 3471:2008
FOPS EN ISO 3449:2008 (ISO 3449:2005)
Note (2) The declared dynamic operator sound pressure levels per ISO 6396:2008*, when the cab is properly installed and maintained, is 77 dB(A).
Note (3) The labelled sound power level for the CE marked configurations when measured according to the test procedure and conditions specified in 2000/14/EC (as amended by 2005/88/EC) is 103 dB(A).
Note (1) Cab and Rollover Protective Structures (ROPS) are standard in North America and Europe.
Note (4) *The measurements were conducted with the cab doors and windows closed.
Front Fixed; Locking differential (standard)
Rear Oscillating ±11 degrees; Locking differential (Standard)


Cat® C3.6 Engine

Cat® C3.6 Engine
EU Stage V and U.S. EPA Tier 4 Final compliant.
The 910 Compact Wheel Loader.

Cat Optimized Z-bar Loader Linkage

Cat Optimized Z-bar Loader Linkage
The Cat Optimized Z-bar Loader linkage combines the digging efficiency of a traditional Z-bar with tool carrier capabilities for great performance and versatility. With parallel lift and high tilt forces throughout the working range you can safely and confidently handle loads with precise control.

Work Tools

Work Tools
The 910 features the Cat exclusive, Performance Series Buckets, as well as high visibility pallet forks. These tools enhance productivity and are available with either an Integrated Toolcarrier (IT) or ISO (wide) coupler style. Legacy coupler tools such as brooms, grapple buckets, multi-purpose buckets and other work tools remain compatible.

Hydraulics and Controls

Hydraulics and Controls
State of the art electro-hydraulic system provides low effort, fine control with fast cycle times. All-in-one joystick helps keep eyes on the work. Operator can adjust machine responsiveness with the push of a button, which allows the operator to set up the machine exactly the way they want it based on the application.

Tuned Drivetrain

Tuned Drivetrain
Smooth shifting and powerful acceleration is matched with modulated hydrostatic braking in the inching/braking pedal, creating a rhythm for material moving. Creeper and electronic engine speed control makes broom and snow blower work easy. Operator tunes between smooth or aggressive shifting with the push of a button.


All around visibility is further enhanced with the availability of a rearview camera. The deluxe cab ensures operator comfort with a heated, air suspension seat and easy to use controls. Available features such as Implement and Hystat Aggressiveness, Ride Control, Lift and Tilt Kickouts, Fork/Bucket Mode and Rimpull Control allow the operator to customize the machine via a soft touch keypad.


Extended service intervals and excellent service access make daily checks quick and easy allowing you to get to work sooner.

Efficiently Powerful

Efficiently Powerful
Efficiently Powerful with its high full turn tipping loads, powerful breakout forces and efficient engine power delivers a balanced solution for all customer applications.

Standard Fuel Savings Features

Standard Fuel Savings Features
Standard Fuel Savings Features such as Eco Mode, On Demand Cooling Fan, and Auto Engine Idle Shutdown make the 910 both powerful and fuel efficient.

Se produktet i 360°

Drag your mouse to rotate the product



Ta kontakt hvis du har spørsmål.


  • Call
  • Arrow



Bølerveien 60
N-2020 Skedsmokorset

Pon Power:        +47 23 17 05 00
E-post:                [email protected]

Pon Equipment: +47 21 08 41 00
Pon Rental:         +47 21 08 43 00
E-post:                 [email protected]

Send meg et tilbud. 

Jeg ønsker å motta nyhetsbrev fra Pon.
Kontakt Tilbake Icon - Contact Sticky Cross
  • Call
  • Arrow

Ring oss

Send oss en e-post

Hvordan foretrekker du at vi kontakter deg? *