Cat CB36B

Asfaltvalser

Om Cat CB36B

 

The CB36B is a versatile machine that can be used as the only vibratory roller on small sized jobs or on larger jobs as a support roller for high-production rollers. The CB36B provides greater production capabilities with its 1400 mm (55 in) wide drums. Its high amplitude and drum width give it the capacity to achieve a tons-per-day production rate that make it an excellent match for shoulders, small parking lots, lane additions or other similar sized jobs.

Spesifikasjoner

Weights
Operating Weight 3803 kg
Maximum Weight at Front Drum 1855 kg
Maximum Weight at Rear Drum 1948 kg
Operating Specifications
Standard Compaction Width 1400 mm
Curb Clearance 520 mm
Turning Radius - Inside Drum Edge 2897 mm
Ground Clearance 284 mm
Travel Speed - Maximum 13 km/h
Static Linear Load 13.6 kg/cm
Motor
Gross Power 36.6 kW
Motormodel C2.2
Dimensjoner
Overall Length 2859 mm
Wheel Base 2050 mm
Overall Width 1500 mm
Maximum Machine Height 2765 mm
Drum Width 1400 mm
Drum Diameter 800 mm
Vibratory System
Centrifugal Force per Drum - Maximum 33.5 kN
Nominal Amplitude - High 0.5 mm
Centrifugal Force per Drum - Minimum 25.5 kN
Frequency 55/48 Hz (3,300/2800 vpm)
Påfyllingskapasitet
Fuel Tank Capacity 90.7 l
Water Spray Tank Capacity 308 l

Egenskaper

Simple Operation

Intuitive Controls

Intuitive, multi-function control panel with vandal protection enables good performance. Easy viewing LCD Display and Vibrant LED lights on the control panel simplify operation in both day and night operation. Integrated vandal cover protects value.

LCD Display

Multiple language options are available for crew diversity. The display screen options include; engine speed, fuel level, hour meter, coolant temperature, hydraulic oil temperature, voltage. The default screen includes: engine speed, fuel level, hydraulic oil temperature and visual indicators to keep the operator informed of low water level (spray system), Eco-mode, drum selections, lights, water spray settings, traction control, regeneration, parking brake, and warning indicators.

Nighttime Operation

The bright LCD display and LED console lights optimize control for day and night operation. Roading and working lights include front lights with turn signals, a single rear working light with turn signals and a warning beacon.

Foldable ROPS and Canopy

Powerful lift cylinders enables a single person to raise and lower without the use of tools. A fixed ROPS is also available. The foldable canopy is compatible with fixed or foldable ROPS.

Efficient Compaction Performance

Vibratory Drums

The vibratory system is equipped with automatic vibration de-activation when the propel lever is in the neutral position. Vibration is available on front, rear, or both drums. The exclusive eccentric weight shaft delivers quick starting and stopping times and a bearing service interval of 3 years or 3000 hours.

Frequency Selection

Two frequency selections deliver excellent compaction performance and low sound levels. Selections of 55 Hz (3,300 vpm) and 48 Hz (2,800) are available.

Drum Offset Capability

A 50 mm (2“) drum offset capability enhances control near curbs and offers more coverage.

Best_In_Class Water Spray System

Performance Enhancing Features

The protected spray bar is designed to fight winds, while a low water level indicator keeps the operator informed. A single water tank with a capacity of 308 L (81 gallons) provides more hours of operation between refills. The intermittent and continuous modes increase control and efficiency. Triple filtration in the tank, before the water pump, and in spray nozzles provides reliability. An antifreeze option provides protection in cold weather, while a single point to drain and filter water offers easy service.

Spring Loaded Scrapers

Spring loaded scrapers keep the drums clean and distribute water evenly for reduced consumption. Robust, retractable hinges help maintain contact with the drum and retract when roading to reduce unnecessary wear. Scrapers are located at the front and rear of each drum.

Optimized Power

Powerful Cat Engines

Two engine offerings are available to meet local emissions requirements. An electronic control module (ECM) helps enable steady operation. The engine includes an electric fuel-transfer pump and fuel tank sized for 12-14 hours of runtime. Multiple engine speed settings enable operators to customize to the specific application and environment. Eco-mode can reduce fuel consumption up to 8 percent, depending on model.

Traction Control

A traction control option is available in a pin-on design that offers quick installation. Field retrofitting can be completed in an hour.

High Ambient Cooling

The cooling system provides ambient capability of 49°C (120°F) @ 80 percent load. The hydraulically driven fan motor enables variable speeds and reduces sound levels.

Designed For Rental

Comfort and Safety

These machines provide easy operation with intuitive controls and extensive legroom to suit a variety of operators. Durable components maximize uptime and lower operating costs, while fuel-efficient engines reduce costs. Low sound levels enhance the environment and ProductLink™ is available for simple remote monitoring.

Kontakt

 

Ta kontakt hvis du har spørsmål.

 

  • Call
  • Arrow

 

OSLO

Bølerveien 60
N-2020 Skedsmokorset

Pon Equipment: +47 21 08 41 00
Pon Rental:         +47 21 08 43 00
E-post:                 [email protected]

Send meg et tilbud. 

250/250
Jeg ønsker å motta nyhetsbrev fra Pon.
Kontakt Tilbake Icon - Contact Sticky Cross
  • Call
  • Arrow

Ring oss

Send oss en e-post

Hvordan foretrekker du at vi kontakter deg? *
250/250

 

ELLER FYLL UT SKJEMA HER:

 

Fyll ut skjemaet nedenfor, så kontakter jeg deg så snart som mulig.

 

Hvordan vil du at vi skal kontakte deg? *
250/250
web-monitoring-ok