Cat XQE30

Mobile Generator Sets

Last ned spesifikasjoner Send Forespørsel

Om Cat XQE30

Whether or not the outage was expected, Cat® Rental Power is here to keep your operation running.

Spesifikasjoner

Generator

Voltage	220 - 415V
Prime Rating	30 kVA (24 kW) Prime
Frequency	50/60 Hz
Standby Run Time (Full Load)	19.3 Hours
Prime Run Time - Full Load	19.3 Hours

Motor

Engine	1103C-33G2/3
Fuel	Diesel

Dimensjoner

Width	44.5 in
Height	65.7 in
Length	90.1 in
Weight	3772 lb

Egenskaper

Fuel / Emissions Strategy

EPA TIER 4 AND CARB CERTIFIED FOR NON-ROAD MOBILE APPLICATIONS

GENERATOR SET

Heavy duty industrial Tier 4 EPA approved emissions certified diesel engine

Complete system designed and built at ISO 9001 certified facility

Factory tested to design specifications at full load conditions

new master

tdfggfk

ENGINE

Governor, mechanical

Electrical system, 12V DC

Cartridge type filters

Fuel/water separator

Battery, rack and cables

GENERATOR

Insulation system, class H

Screen protected and drip-proof, self exciting, self-regulating with fully interconnected damper windings, IC06 cooling system and sealed-for-life bearings

Electrical design in accordance with BS5000 Part 99, IEC60034-1, EN61000-6, NEMA MG-1.22

CONTROL SYSTEM

Manual/Autostart control panel

Vibration isolated, NEMA 1 enclosure with lockable hinged door

DC and AC wiring harnesses

MULTI-VOLTAGE DISTRIBUTION PANEL

Switchable voltage output:

480/277V 3 phase

208/120V 3 phase

240/120V 1 phase

Convenience receptacles

Hinged door over main connectors

NEMA 1 steel enclosure, vibration isolated

CIRCUIT BREAKER

Dual, 3-pole with solid neutral, UL/CSA listed

MOUNTING ARRANGEMENT

Heavy-duty fabricated steel base raised for forklift access

Anti-Vibration mounting pads

Complete OSHA guarding

Three-way valves to allow connection of auxiliary fuel tank

UL listed single walled fuel tank base with 24 hour minimum fuel supply.

Containment area for oil, coolant and fuel spill.

SOUND ATTENUATED ENCLOSURE

Fully weatherproof sound attenuated enclosure with internal exhaust silencer

Highly corrosion resistant construction

Body made from sheet steel components pretreated with zinc phosphate prior to polyester powder coating at 200° C (392° F)

EQUIPMENT FINISH

All electroplated hardware

Anti-corrosive protection prior to painting

High gloss polyurethane paint for durability and scuff resistance

DOCUMENTATION

Operation and maintenance manuals provided

Wiring diagrams included

WARRANTY

All equipment carries full manufacturers warranty

Kontakt

Ta kontakt hvis du har spørsmål.

OSLO

Bølerveien 60
N-2020 Skedsmokorset

Pon Power: +47 23 17 05 00
E-post: [email protected]

Kontakt Tilbake

RING OSS

+4723170500

Send oss en e-post

Vi svarer deg så fort vi kan.

ELLER FYLL UT SKJEMA HER:

Fyll ut skjemaet nedenfor, så kontakter jeg deg så snart som mulig.