Cat SE50 VT stamp og vibro 2,55-5 m leggebredde


Cat SE50 VT stamp og vibro 2,55-5 m leggebredde

Se alle spesifikasjonene

Scroll nedover for mer info om:


Screed Plate Width - Front to Back 324 mm
Transport Width - Endgates Folded 2.55 m
Transport Length - Tractor and Screed 6720 mm
Standard Weight 3340 kg
Operating Specifications
Standard Paving Range 2.55 - 5.0 m (8' 4" - 16' 4")
Maximum Paving Range 8 m
Crown Range -2% to +5%
Extender Slope Range -3% to +2%
Maximum Paving Depth 305 m
Tamper Speed Range 700 to 1800 rpm
Vibrator Speed Range 0 to 3000 rpm
Extender Height Range -20 mm to +50 mm
Heating Time - Maximum Width 25 minutes
Heating Time - Standard Width 15 minutes


Fast Heating

Fast Heating
The 70 kW, tractor integrated generator combined with the technologically advanced screed heating system, ensures fast, even heat distribution. The 15 minute heating time at standard widths can lead to more daily production and lower fuel consumption due to less time waiting for the screed plates to reach the preset temperature. At maximum widths screed plate heating occurs in as little as 25 minutes.

Tamper Bars

Tamper Bars
Tamper bars effectively tuck material under the screed plates to provide precompaction. Adjustable starting and stopping ramp rates maintain an optimal mat finish, while an auto-speed setting accomodates changes in paving speed.
AP655F Paver

Exclusive Monitoring

Exclusive Monitoring
The exclusive generator system monitors heating elements for failure conditions in order to help plan for scheduled service events. Furthermore, temperature zone monitoring allows heating to continue in the event of a sensor failure and warning indicators are delivered through the LCD displays.

More Control

More Control
The extenders are equipped with 2 speed ranges and proportional control for better performance around obstacles. Pendant controls located on the extenders enable operators to perform functions remotely. The conveyor ratio adjustment can be made from the screed control panel when utilizing the 2-sensor feeder system in order to maintain optimal material height in front of the screed.

Integrated Cat Grade Control

Integrated Cat Grade Control
Factory integrated Cat Grade Control allows the crew to operate from either of the tractor or screed consoles. A split screen mode enables the screed operators to work from a single side or from each side of the screed. This is especially helpful when training new operators and when the crew is tasked with multiple job site duties.

Simple Adjustment

Simple Adjustment
Power controls for crown, slope, and height allow for on-the-go adjustment at standard and maximum widths. The exclusive trailing edge screed plate adjusters as well as machined screed frames help optimize plate life and simplify leveling procedures.

Easy Service, Increased Durability

Easy Service, Increased Durability
Water resistant consoles and LCD displays ensure performance in adverse conditions and the million-cycle keypad switches and oil-bath vibratory pods provide longterm reliability. The heating elements slide out for easy replacement. An innovative design simplifies extension additions when setting up for wider width paving. A single person can easily accomplish this task without the use of additional lifting devices.



Ta kontakt hvis du har spørsmål.


  • Call
  • Arrow


Pon Equipment: +47 21 08 41 00
Pon Rental:        +47 21 08 43 00


Finn våre avdelinger her.





Brosjyren er klar. 

Fyll ut skjema og brosjyren blir sendt til din e-postadresse umiddelbart. 

Send meg et tilbud. 

Jeg ønsker å motta nyhetsbrev fra Pon.
  • Call
  • Arrow

Ring oss

Send oss en e-post

Hvordan foretrekker du at vi kontakter deg? *