301.7D.jpg

Cat 301.7D

Scroll nedover for mer info om:

Spesifikasjoner

Motor
Motormodel Yanmar 3TNV76
Net Power 13.2 kW
Displacement 1116 cm³
Gross Power - ISO 14396 17.9 kW
Rated Net Power - 2,200 rpm - ISO 9249 13.2 kW
Weights
Operating Weight 1728 kg
Operating Weight - With Cab 1720 kg
Operating Weight - With Cab and Extending Undercarriage 1845 kg
Operating Weight - With Canopy 1610 kg
Operating Weight - With Canopy and Extending Undercarriage 1735 kg
Travel System
Gradeability 30°/58%
Travel Speed 2.8 km/h/5.6 km/h (1.74 mph/3.48 mph)
Hydraulic System
Operating Pressure - Equipment 200 bar
Operating Pressure - Travel 200 bar
Operating Pressure - Swing 125 bar
Auxiliary Circuits - Primary 30 L/min at 170 bar (8 gal/min at 2,465 psi)
Auxiliary Circuits - Secondary 17 L/min at 200 bar (4.5 gal/min at 2,900 psi)
Maximum Bucket Force 18.8 kN
Maximum Stick Force - Long Stick 9.8 kN
Maximum Stick Force - Standard Stick 11.2 kN
Pump Flow at 2,200 rpm 6.4 l/min
Blade
Width 990 mm
Height 230 mm
Dig Depth - Standard Blade 317 mm
Lift Height - Standard Blade 197 mm
Påfyllingskapasitet
Fuel Tank Capacity 24 l
Hydraulic Tank Capacity 21 l
Dimensions (Approximate) - Standard Stick
Boom Swing Angle - LH 77°/64°
Boom Swing Angle - RH 48 °
Height 2290 mm
Length - Undercarriage - Extending 1600 mm
Length - Undercarriage - Fixed 1445 mm
Maximum Boom Offset - LH 360 mm
Maximum Boom Offset - RH 520 mm
Maximum Dig Height 3485 mm
Maximum Digging Depth 2200 mm
Maximum Dozer Dig Depth 320 mm
Maximum Dozer Lift Height 200 mm
Maximum Dump Height 2500 mm
Maximum Reach - Ground Level 3700 mm
Maximum Vertical Dig Depth 1430 mm
Tail Swing Radius 1170 mm
Transport Length - Arm Lowered 3855 mm
Undercarriage Width - Extended 1300 mm
Undercarriage Width - Retracted 990 mm
Width 990 mm
Dimensions (Approximate) - Long Stick
Boom Swing Angle - LH 77°/64°
Boom Swing Angle - RH 48 °
Height 2290 mm
Length - Undercarriage - Extending 1600 mm
Length - Undercarriage - Fixed 1445 mm
Maximum Boom Offset - LH 360 mm
Maximum Boom Offset - RH 520 mm
Maximum Dig Height 3595 mm
Maximum Digging Depth 2400 mm
Maximum Dozer Dig Depth 320 mm
Maximum Dozer Lift Height 200 mm
Maximum Dump Height 2610 mm
Maximum Reach - Ground Level 3895 mm
Maximum Vertical Dig Depth 1620 mm
Tail Swing Radius 1170 mm
Transport Length - Arm Lowered 3855 mm
Undercarriage Width - Extended 1300 mm
Undercarriage Width - Retracted 990 mm
Width 990 mm
Operating Specifications
Machine Overhang 495 mm
Stick Length - Long 1180 mm
Stick Length - Standard 980 mm

Features

Performance

Stability
An extending undercarriage and fold out dozer blade allow the machine to be configured for optimum performance. Blade extensions are retained with the dozer making them easy to use and ensuring that they are not lost.
C767774
Dozer Float
Ground levelling and finishing applications are fast and easy with the dozer float function engaged making site clean-up much more efficient.
C755027
Long Dozer Option
The optional longer dozer blade enables improved ‘dig to blade' characteristics to give easier on site clean up.
100% Pilot Controls
Delivers excellent machine control and lifetime ‘as new' performance eliminating the need for linkage and cable maintenance, lowering owning and operating costs and resulting in less downtime.
C755033
Dig Force
The new 301.7D boasts high bucket and stick forces making it an impressive and productive excavator. The choice of two stick lengths allows the customer to configure his machine to deliver even higher stick forces or reach.
C755005

Versatility

High Flexibility
Compact in size and with a transport weight under 2000 kg (4,500 lb), the 301.7D can be transported easily using a conventional trailer and pick up truck or transit van. The sturdy hoisting eyelets on the cab roof enable the easy and rapid relocation of the machine between sites.
Automatic Swing Lock
Safe transportation of the machine is aided by the Cat automatic swing lock which locks the machines upper body in place when the control console is raised or the engine is stopped.
Work Tools
A range of work tools are available including buckets, hammer and auger to take advantage of the machines versatility. All these tools are matched to the machine to optimize performance and deliver excellent value through productivity and long life.
Auxiliary Hydraulics as Standard Fit
Machine is ‘ready to work'. Hammer and two way lines complete with quick disconnect fittings as standard. Connections are located close to the tool to reduce hose lengths and any potential damage. Additional line options are available to further increase machine versatility. Stick and bucket cylinder hoses are protected by routing them through the boom.
C700241
Auxiliary Flow Control
Machines configured with proportional auxiliary hydraulics, include the ability to adjust the flow for even greater tool control. Especially useful with tools such as angling ditching buckets.
C700240

Productive Comfort

Cab Comfort
The Cat 301.7D gives the operator a large comfortable space in which to work. The ergonomic control layout, travel pedals and adjustable wrist resets are engineered to minimize operator fatigue and increase productivity. The layout is designed for easy cleaning, minimizing downtime between jobs. There is a choice of cab with heater or canopy available. The canopy offering two sided access for even greater on site versatility.
Split Front Window
The lower front window section slides into the upper section frame. Both sections are then raised and stored in the roof using a gas assisted mechanism. This allows the operator to position in front window to suit their visibility and ventilation requirements with easy storage.
C767775

Engine and Serviceability

Powerful Engine
The Cat 301.7D is fitted with a 17.9 kW (24.3 hp) gross power engine that is installed at a much lower rated 13.2 kW (17.7 hp). This is designed to reduce engine wear, give cooler running temperatures, with longer life and lower owner and operating costs.
Excellent Service Access
Daily checks and regular service points including fuel and hydraulic oil fill are easily reached via the large steel rear door. The main hydraulic valve and lines are also easily reached through a removable floor plate and side panels. The machine has durable steel body panels all around, offering good resistance to impact damage and helping to maintain the machine's appearance and value.
C757152
Customer Support - Unmatched Support Makes the Difference
Your Cat dealer is ready to assist you with your purchase decision and everything after.
  • Financing packages are flexible to meet your needs
  • Unmatched parts availability keeps you working
  • Make comparisons of machines, with estimates of component life, preventative maintenance and cost of production
  • For more information on Cat products, dealer services and industry solutions, visit www.cat.com

Kontakt

 

Ta kontakt hvis du har spørsmål.

 

  • Call
  • Arrow

 

Pon Equipment: +47 21 08 41 00
Pon Rental:        +47 21 08 43 00
E-post:                firmapost@pon-cat.com

 

Finn våre avdelinger her.

 

 

 

Reklamasjonsskjema

Brosjyren er klar. 

Fyll ut skjema og brosjyren blir sendt til din e-postadresse umiddelbart. 

Send meg et tilbud. 

  • Call
  • Arrow

Ring oss

Send oss en e-post

Hvordan foretrekker du at vi kontakter deg? *

Handlekurv

Vraag offerte aan