304.5E2 XTC Mini Hydraulic Excavator with Xtra Tool Carrier

Cat 304.5E2 XTC

Scroll nedover for mer info om:

Norske maskintilpasninger
 

  • Slangebruddsventil
  • Lang stikke standard
  • Standrad med AC
  • Flyt på skjær
  • Justerbar oljemengde til arbeidsverktøy
  • Auto idle

Spesifikasjoner

Motor
Motormodel Cat C2.4
Net Power 30 kW
Rated Net Power - 2,200 rpm - ISO 9249/EEC 80/1269 30 kW
Bore 87 mm
Displacement 2.4 l
Stroke 102.4 mm
Emissions Meets U.S. EPA Tier 4 Final/EU Stage IIIA emission standards.
Gross Power - ISO 14396 31.2 kW
Weights
Operating Weight 4080 kg
Weight - Canopy, Standard Stick 3925 kg
Note Weight includes counterweight, rubber tracks, bucket, operator, full fuel and auxiliary lines.
Weight - Cab, Long Stick 4080 kg
Weight - Cab, Standard Stick 4050 kg
Weight - Canopy, Long Stick 3955 kg
Travel System
Maximum Traction Force - High Speed 16.9 kN
Maximum Traction Force - Low Speed 31 kN
Travel Speed - High 5.1 km/h
Travel Speed - Low 3.1 km/h
Gradeability - Continuous Operation 20°
Gradeability - Maximum 30°
Ground Pressure - Cab Long Stick 29.8 kPa
Ground Pressure - Cab Standard Stick 29.6 kPa
Ground Pressure - Canopy Long Stick 28.9 kPa
Ground Pressure - Canopy Standard Stick 28.7 kPa
Hydraulic System
Auxiliary Circuit - Primary (245 bar/3,553 psi) 70 l/min
Auxiliary Circuit - Secondary (174 bar/2,524 psi) 25 l/min
Digging Force - Stick - Long 19.5 kN
Digging Force - Stick - Standard 21.6 kN
Operating Pressure - Equipment 245 bar
Operating Pressure - Swing 216 bar
Operating Pressure - Travel 245 bar
Pump Flow at 2,200 rpm 100 l/min
Digging Force - Bucket 37.8 kN
Type Load Sensing Hydraulics with Variable Displacement Piston Pump
Swing System
Machine Swing Speed 10 r/min
Boom Swing - Left - With Stop* 55°
Boom Swing - Left - Without Stop* 80°
Boom Swing - Right 50°
Note *Automatic swing brake, spring applied, hydraulic release.
Blade
Width 1950 mm
Height 325 mm
Dig Depth 470 mm
Lift Height 400 mm
Påfyllingskapasitet
Cooling System 5.5 l
Engine Oil 9.5 l
Hydraulic Tank 25 l
Drivstofftank 57 l
Hydraulic System 58 l
Cab
Dynamic Operator Sound Pressure Level (ISO 6396:2008) 81 dB(A)
Exterior Sound Power Level - ISO 6395:2008* 96 dB(A)
Note *European Union Directive “2000/14/EC”
Certification - Cab and Canopy
Roll Over Protective Structure (ROPS) ISO 12117-2
Tip Over Protective Structure (TOPS) ISO 12117
Top Guard ISO 10262 (Level I)
Dimensions - Long Stick
Boom Height - Shipping Position 1770 mm
Boom In Reach 2220 mm
Boom Swing - Left 670 mm
Boom Swing - Right 735 mm
Dig Depth 3430 mm
Maximum Blade Depth 470 mm
Maximum Blade Height 400 mm
Maximum Dig Height 5070 mm
Maximum Dump Clearance 3690 mm
Maximum Reach 5590 mm
Maximum Reach - Ground Level 5470 mm
O/A Shipping Height 2500 mm
O/A Shipping Length 4930 mm
O/A Track Width 1950 mm
O/A Undercarriage Length 2220 mm
Swing Bearing - Height 565 mm
Tail Swing 975 mm
Track Belt/Shoe Width 350 mm
Vertical Wall 2560 mm
Dimensions - Standard Stick
Boom Height - Shipping Position 1480 mm
Boom In Reach 2110 mm
Boom Swing - Left 670 mm
Boom Swing - Right 735 mm
Dig Depth 3130 mm
Maximum Blade Depth 470 mm
Maximum Blade Height 400 mm
Maximum Dig Height 4980 mm
Maximum Dump Clearance 3590 mm
Maximum Reach 5350 mm
Maximum Reach - Ground Level 5220 mm
O/A Shipping Height 2500 mm
O/A Shipping Length 4820 mm
O/A Track Width 1950 mm
O/A Undercarriage Length 2220 mm
Swing Bearing - Height 565 mm
Tail Swing 975 mm
Track Belt/Shoe Width 350 mm
Vertical Wall 2420 mm
Lift Capacities at Ground Level (Long Stick)* - Lift Point Radius: 3000 mm (118 in)
Blade Down - Front 1570 kg
Blade Down - Side 910 kg
Blade Up - Front 820 kg
Blade Up - Side 820 kg
Note *The above loads are in compliance with hydraulic excavator lift capacity rating standard ISO 10567:2007 and they do not exceed 87% of hydraulic lifting capacity or 75% of tipping capacity. The excavator bucket weight is not included on this chart.
Lift Capacities at Ground Level (Long Stick)* - Lift Point Radius: 4500 mm (177 in)
Blade Down - Front 860 kg
Blade Down - Side 480 kg
Blade Up - Front 430 kg
Blade Up - Side 430 kg
Note *The above loads are in compliance with hydraulic excavator lift capacity rating standard ISO 10567:2007 and they do not exceed 87% of hydraulic lifting capacity or 75% of tipping capacity. The excavator bucket weight is not included on this chart.
Lift Capacities at Ground Level (Standard Stick)* - Lift Point Radius: 3000 mm (118 in)
Blade Down - Front 1610 kg
Blade Down - Side 920 kg
Blade Up - Front 830 kg
Blade Up - Side 830 kg
Note *The above loads are in compliance with hydraulic excavator lift capacity rating standard ISO 10567:2007 and they do not exceed 87% of hydraulic lifting capacity or 75% of tipping capacity. The excavator bucket weight is not included on this chart.
Lift Capacities at Ground Level (Standard Stick)* - Lift Point Radius: 4500 mm (177 in)
Blade Down - Front 1040 kg
Blade Down - Side 590 kg
Blade Up - Front 530 kg
Blade Up - Side 530 kg
Note *The above loads are in compliance with hydraulic excavator lift capacity rating standard ISO 10567:2007 and they do not exceed 87% of hydraulic lifting capacity or 75% of tipping capacity. The excavator bucket weight is not included on this chart.
Operating Specifications
Machine Overhang 0 mm
Stick Length - Long 1615 mm
Stick Length - Standard 1315 mm
Operating Specifications - Loader
Breakout Force - Lift - 1829 mm (72 in) MP Bucket 720 kg
Breakout Force - Tilt - 1829 mm (72 in) MP Bucket 850 kg
Lift Capacity - 1070 mm (42 in) Forks 600 kg
Lift Capacity - 1829 mm (72 in) MP Bucket 525 kg
Maximum Dump Angle - 1829 mm (72 in) MP Bucket 27°
Maximum Height - 1829 mm (72 in) MP Bucket with Cutting Edge 935 mm
Note *Rated operating capacity based on hydraulic limit (ROC is the smaller of the hydraulic limit or 50% of the static tipping load).
Rack Back Angle - Maximum Height - 1829 mm (72 in) MP Bucket 48°
Rated Operating Capacity* - Ground - 1829 mm (72 in) MP Bucket 850 kg
Rated Operating Capacity* - Maximum Height - 1829 mm (72 in) MP Bucket 525 kg
Reach - Maximum Lift/Dump - 1829 mm (72 in) MP Bucket 2040 mm
Undercarriage
Number of Carrier Rollers 1
Number of Track Rollers 4
Track Roller Type Center Flange

Features

XTC

XTC
  • The innovative skid steer loader interface adds versatility and work tool integration with the use of compact loader attachments. Coupler operation is controlled through the standard machine joysticks by pressing the XTC switch in the operator station.
  • The 304.5E2 XTC allows the operator to achieve improved productivity in material carrying applications and reduced backfilling times.
  • Operators can complete multiple applications at a single job site with a single machine.
  • Recommended work tools include: General Purpose Buckets, Multi-Purpose Buckets, Forks, Dozer Blades, Brooms, Power Box Rakes and Trenchers.

QUALITY

QUALITY
  • The durable hoods and frame and the compact radius design of the 304.5E2 XTC let you work confidently in confined areas.
  • The operator environment includes a high quality suspension seat, easy to adjust armrests and 100% pilot controls.

EFFICIENCY

EFFICIENCY
  • High Definition Hydraulic System provides a load sensing and flow sharing capability leading to operational precision, efficient performance and greater control.
  • Power on Demand provides optimal efficiency and performance the moment you need it. This automatic system ensures fuel efficiency through appropriate engine rating to meet all operational needs as required.

PERFORMANCE

PERFORMANCE
  • The 304.5E2 XTC uses the proven platform design of the 304E2 to deliver ultimate power and reliability.
  • Undercarriage upgraded to offer superior durability.
  • COMPASS Control Panel is a standard feature that allows the operator to easily adjust auxiliary flows, activate auto idle for improved fuel efficiency and utilize the security system to ensure protection of valuable assets with the simple touch of a button.
  • The Site Reference System included in the COMPASS monitor provides output from pitch and roll sensors to aid in grading and level trenching.

SERVICEABILITY

SERVICEABILITY
  • Convenient service and maintenance requirements include ease of access to daily check points, 500 hour engine oil and filter change period, 500 hour grease interval on front implement, S·O·SSM oil sampling valve and overall long term durability.

SAFETY

SAFETY
  • Cat Mini Excavators are ROPS, TOPS and Top Guard Level 1 certified and include the Cat Interlock (hydraulic lockout) System, a certified accumulator which allows for auxiliary pressure to be released, making connecting and disconnecting work tools safer and easier, and a travel alarm. All of these safety features are standard on the E2 model lineup (travel alarm optional in Europe).

Kontakt

 

Ta kontakt hvis du har spørsmål.

 

  • Call
  • Arrow

 

Pon Equipment: +47 21 08 41 00
Pon Rental:        +47 21 08 43 00
E-post:                firmapost@pon-cat.com

 

Finn våre avdelinger her.

 

 

 

Reklamasjonsskjema

Brosjyren er klar. 

Fyll ut skjema og brosjyren blir sendt til din e-postadresse umiddelbart. 

Send meg et tilbud. 

  • Call
  • Arrow

Ring oss

Send oss en e-post

Hvordan foretrekker du at vi kontakter deg? *

Handlekurv

Vraag offerte aan