Cat 930M

Små hjullastere

Bruttoeffekt: 125 kW/ 168 hk
Vekt: 14 tonn
Standard skuff: 2,5 m³

Se brosjyre Send Forespørsel

Kan leies via Pon Rental

Om Cat 930M

Cat 930M hjullaster setter standarden for produktivitet, drivstoffeffektivitet og førerkomfort. Den forbedrede optimaliserte Z-bar lasterleddet gir rask lasteytelse til en tradisjonell Z-bar med parallellitet og lasthåndteringsevne til en utstyrsbærer. Et høyt dreiemoment, C7.1 ACERT-motor med lav hastighet, fungerer sammen med et intelligent hydrostatisk drivlinje for å levere drivstoffeffektivitet som standard. Oppfyller Stage V utslippskrav med en miljøvennlig, ren utslippsmodul designet for å administrere seg selv slik at du kan konsentrere deg om arbeidet ditt. Opplev den nye bransjestandarden.

VAKTMESTEREN PÅ ANLEGGET

Med Cat 930M får du komplett løsning til alle oppdrag. Denne servicemaskinen er perfekt for veivedlikehold, hele året. Intelligent hydrostatisk transmisjon gir en unik mulighet til presis styring av hastighet og oljefløde. Dette gjør hjullasterne meget godt egnet til utstyr som kantklipper, feiekost, snøfres eller annet hydraulisk drevet verktøy.

Romslig førerhus med utmerket sikt, lydnivå på kun 66 dBA (i standard modus) og brukervennlig kontrollpanel
Premium førerhytte med kjøling og varme i setet
Høy trekkraft
Differensialsperre i begge akslinger
Ryggekamera
Klima-anlegg
Med en aksellast på under 10 tonn og en intelligent hydrostatisk drivlinje, er Cat 930M perfekt for hydraulisk drevet verktøy som kantklipper, feiekost, snøbrøytingsjobber mm.

Les mer om Cat hjullastere til service og vedlikehold

KUNDEINTERVJU: FRA TRAKTOR TIL HJULLASTER

Da Tom Arild Johansen trengte mer kapasitet til snøryddingsjobber, valgte han å kjøpe en ny Cat 930M hjullaster fremfor en ny traktor. Tom Arild er veldig fornøyd med den nye hjullasteren til snøryddingsjobber, og merket at det var større forskjell enn han trodde på traktor og hjullaster til denne typen arbeid.

Les kundeintervjuet

FILMER

Cat® hjullaster med hydraulisk utstyr til vår og sommer | Cat® 926M - 938M
Cat® hjullaster til vintervedlikehold | Cat 906M - 938M

Spesifikasjoner

Motor

Maximum Gross Power	168 HP
Rated Net Power - 1,600 rpm - SAE J1349 at Minimum Fan Speed (Standard Power Mode: Range 1-3*)	156 HP
Maximum Net Torque - SAE J1349 (Performance Power Mode: Range 1-4)	588 ft·lbf
Maximum Gross Power - 1,800 rpm - ISO 14396 (DIN) (Performance Power Mode: Range 1-4)	170 mhp
Maximum Gross Power - 1,800 rpm - ISO 14396 (Performance Power Mode: Range 1-4)	168 HP
Displacement (Performance Power Mode: Speed Range 1-4)	427 in³
Note (2)	*Range 4 power and torque is equal to Performance Mode with Caterpillar Power by Range technology.
Maximum Gross Torque - ISO 14396 (Performance Power Mode: Range 1-4)	601 ft·lbf
Rated Net Power - 1,600 rpm - ISO 9249 (DIN) at Minimum Fan Speed (Standard Power Mode: Range 1-3*)	158 mhp
Note (1)	Net power ratings are tested at the reference conditions for the specified standard and denote power available at the flywheel when the engine is equipped with alternator, air cleaner, emission components and fan at specified speed.
Maximum Gross Power - 1,600 rpm - ISO 14396 (Standard Power Mode: Range 1-3*)	160 HP
Motormodel	Cat C7.1**
Displacement (Standard Power Mode: Speed Range 1-3*)	427 in³
Maximum Net Torque - SAE J1349 (Standard Power Mode: Range 1-3*)	573 ft·lbf
Rated Net Power - 1,800 rpm - SAE J1349 at Minimum Fan Speed (Performance Power Mode: Range 1-4)	163 HP
Rated Net Power - 1,800 rpm - ISO 9249 (DIN) at Minimum Fan Speed (Performance Power Mode: Range 1-4)	166 mhp
Maximum Gross Torque - ISO 14396 (Standard Power Mode: Range 1-3*)	586 ft·lbf
Note (3)	**The Cat C7.1 engine meets Tier 4 Final/Stage V off-highway emission standards.
Maximum Gross Power - 1,600 rpm - ISO 14396 (DIN) (Standard Power Mode: Range 1-3*)	162 mhp
Maximum Net Torque - ISO 9249:2007 (Performance Power Mode: Range 1-4)	587 ft·lbf
Rated Net Power - 1,800 rpm - ISO 9249 at Minimum Fan Speed (Performance Power Mode: Range 1-4)	164 HP
Maximum Net Torque - ISO 9249:2007 (Standard Power Mode: Range 1-3*)	572 ft·lbf
Rated Net Power - 1,600 rpm - ISO 9249 at Minimum Fan Speed (Standard Power Mode: Range 1-3*)	156 HP

Buckets

Bucket Capacities	2.1-5.0 m³ (2.7-6.5 yd³)
Bucket Capacities - Light Material	3.1-5.0 m³ (4.0-6.5 yd³)
Bucket Capacities - General Purpose	2.1-2.7 m³ (2.7-3.5 yd³)

Weights

Operating Weight

31382 lb

Cab

ROPS	ISO 3471:2008
FOPS	ISO 3449:2005 Level II
Note (2)	The declared dynamic operator sound pressure levels per ISO 6396:2008*, when properly installed and maintained, are: – Standard cab: 68 ±3 dB(A) – Deluxe cab: 66 ±2 dB(A)
Note (1)	Cab and Rollover Protective Structures (ROPS) are standard in North America and Europe.
Note (3)	*The measurements were conducted with the cab doors and windows closed and at 70% of the maximum engine cooling fan speed. The sound level may vary at different engine cooling fan speeds.

Steering

Steering Cycle Times - Full Left to Full Right - At 1,800 rpm: 90 rpm Steering Wheel Speed	2.4 s
Maximum Steering Torque - 40° (Full Turn)	27747 ft·lbf
Maximum Flow - Steering Pump	34 gal/min
Number of Steering Wheel Turns - Full Left to Full Right or Full Right to Full Left	3.5 turns
Maximum Working Pressure - Steering Pump	3500 psi
Maximum Steering Torque - 0° (Straight Machine)	37155 ft·lbf
Steering Articulation Angle - Each Direction	40°

Påfyllingskapasitet

Hydraulic System - Including Tank	43.6 gal (US)
Hydraulic Tank	23.8 gal (US)
Rear Axles	6.6 gal (US)
Transmission - Gear Box	2.2 gal (US)
Diesel Exhaust Fluid (DEF) Tank	5 gal (US)
Front Axles	6.9 gal (US)
Note	DEF used in Cat SCR systems must meet the requirements outlined in the International Organization for Standardization (ISO) standard 22241-1.
Drivstofftank	51.5 gal (US)
Engine Crankcase	5.3 gal (US)
Cooling System	7.9 gal (US)

Loader Hydraulic System

Hydraulic Cycle Time - Standard Mode at 1,600 rpm - Float Down, Maximum Lift to Ground Level	2.7 s
Hydraulic Cycle Time - Standard Mode at 1,600 rpm - Raise, Ground Level to Maximum Lift	5.7 s
Note (1)	*3rd and 4th function flow is fully adjustable from 20% to 100% of maximum flow through the secondary display, when equipped.
Relief Pressure - Tilt Cylinder - 3rd and 4th Function Maximum Working Pressure	3771 psi
Maximum Working Pressure - Implement Pump	3771 psi
Relief Pressure - Tilt Cylinder	4061 psi
Relief Pressure - Tilt Cylinder - 3rd and 4th Function Relief Pressure	4061 psi
Maximum Flow - Implement Pump - 4th Function Maximum Flow*	42 gal/min
Hydraulic Cycle Time - Performance Mode at 1,800 rpm - Dump, at Maximum Lift Height	1.5 s
Hydraulic Cycle Time - Performance Mode at 1,800 rpm - Raise, Ground Level to Maximum Lift	5.1 s
Hydraulic Cycle Time - Performance Mode at 1,800 rpm - Float Down, Maximum Lift to Ground Level	2.7 s
Hydraulic Cycle Time - Standard Mode at 1,600 rpm - Total Cycle Time	10.1 s
Hydraulic Cycle Time - Standard Mode at 1,600 rpm - Dump, at Maximum Lift Height	1.7 s
Hydraulic Cycle Time - Performance Mode at 1,800 rpm - Total Cycle Time	9.3 s
Maximum Flow - Implement Pump	50 gal/min
Maximum Flow - Implement Pump - 3rd Function Maximum Flow*	50 gal/min

Sound

Note (1)	European Union Directive “2000/14/EC”
Operator Sound Pressure (ISO 6396:2008)	72 dB(A)
Average Exterior Sound Pressure (ISO 6395:2008)	101 dB(A)

Axles

Rear	Oscillating ±11 degrees; Open differential (standard); Limited slip differential (optional)
Front	Fixed; Locking differential (standard)

Transmission

Forward and Reverse - Range 1*	1-13 km/h (0.6-8 mph)
Forward and Reverse - Range 4	25 mile/h
Forward and Reverse - Range 3	17 mile/h
Note	*Creeper control allows maximum speed range adjustability from 1 km/h (0.6 mph) to 13 km/h (8 mph) in Range 1 through the secondary display, when equipped. Factory default is 7 km/h (4.4 mph).
Forward and Reverse - Range 2	8 mile/h

Tires

Note (3)	Caterpillar recommends that you consult a tire supplier to evaluate all conditions before selecting a tire model.
Note (1)	Other tire choices are available. Contact your Cat dealer for details.
Note (2)	In certain applications, the loader’s productive capabilities may exceed the tire’s tonnes-km/h (ton-mph) capabilities.
Other Choices Include	20.5 R25, radial (L-2); 20.5 R25, radial (L-5); 20.5-25 12PR (L-2); 20.5-25 12PR (L-3); 20.5-25 16PR (L-5); 600/65 R25 radial (L-3); Skidder/Agriculture; Solid Tires
Standard Size	20.5 R25, radial (L-3)

Air Conditioning System

Air Conditioning

The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.9 kg of refrigerant which has a CO2 equivalent of 2.717 metric tonnes.

Egenskaper

Efficiently Powerful

The Cat® C7.1 engine provides cleaner, quieter operation while delivering superior performance and durability through a high torque, low speed design. Caterpillar's exclusive Intelligent Power Management system monitors operator input and power availability to keep the machine working at peak efficiency and provide the operator with greater customization to suit their application.

A choice of Power Modes allows you to choose between maximum fuel efficiency or boosted power along with hydraulic speed.

STANDARD POWER MODE

Saves fuel and reduces cab sound levels
Biggest gains are seen during load and carry, snow removal and roading applications

PERFORMANCE POWER MODE

Enabled at the push of a button (HP+), boosts engine power by up to 10% and engine speed by over 12%
Increases hydraulic cycle times and productivity

Lock up and go with fully locking front differential axle that can be engaged on the move at full torque. Maximize your traction with optional Limited Slip Differential on the rear axle to keep you climbing.

Work Made Easy

OPTIMIZED Z-BAR LINKAGE

The optimized Z-bar linkage combines the digging efficiency of a traditional Z-bar with integrated tool carrier capabilities for great performance and versatility. Visibility to bucket corners and fork tips at ground level remain excellent while sight lines at maximum lift are improved with a Generation III lift arm design. Lift higher and reach further with optional High Lift linkage available on all three models.

QUICK LOADING PERFORMANCE SERIES BUCKETS

Performance Series Buckets deliver up to 10% higher fill factors compared to previous models, better material retention for significant productivity and fuel efficiency improvements. The buckets feature a longer floor to take a bigger bite of the pile, an open throat to heap higher and curved side bars to help with material retention.

Enjoy All Day Comfort

A spacious, quiet and comfortable operator environment helps keep you relaxed and productive throughout the day. Experience superior all around visibility with single piece front windshield, redesigned linkage and clean hydraulic lines routing. Seat-mounted controls featuring low effort joystick for lift and tilt functions along with integrated Forward/Neutral/Reverse switch, differential lock trigger and optional third and fourth auxiliary functions.

Automatic climate control with heated rear glass and external mirrors
Information at a glance with large primary LCD display
Heated and cooled seat option
Optional Ride Control
Exclusive electro-hydraulic cylinder snubbing
An extra eye on the job site with optional integrated rear object detection and optional* rearview camera

*Standard in Europe.

Customize Your Experience

The M Series Wheel Loaders will remember you and your personal settings with unique operator codes to make this machine truly yours and keep it secure.

Work as one with your machine by customizing your controls.

Select your Power Train Mode
Reduce tire wear using Rimpull
Fine tune ground speed with Creeper Control
Adjustable Electo-Hydraulic Controls
Set Directional Shift Response based on job application

Service

Get up and running quickly with ground level, daily service access and optional engine compartment lighting. Three large service doors can be opened and closed in any order to give full access to filters and service points. Extended service intervals on hydraulic and power train filters reduce service time and maximize uptime. Additional service features include:

Product Link™ PRO standard with optional subscription to VisionLink®.
Maintenance reminders through secondary display at scheduled intervals.
Fit for Life Diesel Particulate Filter that is designed to exceed the engine overhaul life.
Quick fuel filter service with Caterpillar's exclusive electric fuel priming pump.
Jump start studs as standard equipment.
Extended cleanouts with single plane cooling system and wide spaced 6 fans per inch coolers as standard.
Integrated Autolube (optional) with adjustable greasing frequency.

Customer Support

With renowned Cat dealer support, rely on your Cat dealer to help you every step of the way with new or used machine sales, rental or rebuild options to meet your business needs.

Maximize your machine uptime with unsurpassed worldwide parts availability, trained technicians and customer support agreements.

Let us earn your business. Experience an M Series Small Wheel Loader and join the Caterpillar family.