The Cat® 226D Skid Steer Loader, with its radial lift design, delivers impressive mid-lift reach and excellent digging performance with outstanding drawbar power.
Engine Model | Cat C2.2 CRDI |
Net Flywheel Power | 65.8 HP |
Gross Power - SAE J1995 | 67.1 HP |
Net Power - SAE 1349 | 65.8 HP |
Displacement | 134.3 in³ |
Stroke | 3.9 in |
Bore | 3.3 in |
Net Power - ISO 9249 | 66.5 HP |
Peak Torque - 1,500 rpm - SAE J1995 | 153 ft·lbf |
Operating Weight | 5705 lb |
Note | Operating Weight, Operating Specifications and Dimensions all based on 75 kg (165 lb) operator, all fluids, single speed, 1524 mm (60 in) dirt bucket, Cat 10 × 16.5 tires, standard flow hydraulics, C0 cab (OROPS, static seat), 880 CCA battery, manual quic |
Rated Operating Capacity | 1550 lb |
Tipping Load | 3100 lb |
Breakout Force - Tilt Cylinder | 3983 lb |
Rated Operating Capacity with Optional Counterweight | 1650 lb |
Note | Operating Weight, Operating Specifications and Dimensions all based on 75 kg (165 lb) operator, all fluids, single speed, 1524 mm (60 in) dirt bucket, Cat 10 × 16.5 tires, standard flow hydraulics, C0 cab (OROPS, static seat), 880 CCA battery, manual quic |
Wheel Base | 41.5 in |
Height - Top of Cab | 79.8 in |
Vehicle Width over Tires | 58.9 in |
Ground Clearance | 6.9 in |
Departure Angle | 27.9° |
Maximum Dump Angle | 46.7° |
Bucket Pin Height - Carry Position | 8.5 in |
Bucket Pin Height - Maximum Lift | 110.9 in |
Bumper Overhang - Behind Rear Axle | 35.2 in |
Clearance at Maximum Lift and Dump | 81.8 in |
Length - With Bucket on Ground | 127.3 in |
Length - Without Bucket | 99.4 in |
Maximum Overall Height | 143.8 in |
Maximum Reach - With Arms Parallel to Ground | 50.7 in |
Rack Back Angle - Maximum Height | 88.9° |
Reach - Maximum Lift/Dump | 21 in |
Turning Radius from Center - Bucket | 77.8 in |
Turning Radius from Center - Coupler | 43.5 in |
Turning Radius from Center - Machine Rear | 59.6 in |
Note | Operating Weight, Operating Specifications and Dimensions all based on 75 kg (165 lb) operator, all fluids, single speed, 1524 mm (60 in) dirt bucket, Cat 10 × 16.5 tires, standard flow hydraulics, C0 cab (OROPS, static seat), 880 CCA battery, manual quic |
Hydraulic Flow - High Flow - Hydraulic Power (Calculated) | 50.9 HP |
Hydraulic Flow - High Flow - Maximum Loader Hydraulic Flow | 26 gal/min |
Hydraulic Flow - High Flow - Maximum Loader Hydraulic Pressure | 3336 psi |
Hydraulic Flow - Standard - Hydraulic Power (Calculated) | 35.5 HP |
Hydraulic Flow - Standard - Loader Hydraulic Flow | 18 gal/min |
Hydraulic Flow - Standard - Loader Hydraulic Pressure | 3336 psi |
ROPS | ISO 3471:2008 |
FOPS | ISO 3449:2005 Level I |
FOPS Level II | ISO 3449:2005 Level II |
Travel Speed - Forward or Reverse - One Speed | 7.6 mile/h |
Travel Speed - Forward or Reverse - Two Speed Option | 11.1 mile/h |
Cooling System | 3.2 gal (US) |
Engine Crankcase | 2.6 gal (US) |
Fuel Tank | 15.1 gal (US) |
Hydraulic System | 11.9 gal (US) |
Hydraulic Tank | 9 gal (US) |
Chain Box - Each Side | 1.8 gal (US) |
Air Conditioning | The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 0.81 kg of refrigerant which has a CO2 equivalent of 1.158 metric tonnes. |
Inside Cab* | 83 dB(A) |
Note (1) | Cab and Rollover Protective Structures (ROPS) are standard in North America and Europe. |
Note (2) | *The declared dynamic operator sound pressure levels per ISO 6396:2008. The measurements were conducted with the cab doors and windows closed and at 70% of the maximum engine cooling fan speed. The sound level may vary at different engine cooling fan spee |
Note (3) | **The labeled sound power level for the CE marked configurations when measured according to the test procedure and conditions specified in 2000/14/EC. |
Outside Cab** | 102 dB(A) |