Cat 301.7D

Om Cat 301.7D

The Cat® 301.7D gives you a blend of power, control and stability to make your working day easier and more productive.

Send meg et tilbud:

Spesifikasjoner

Motor

Motormodel	Yanmar 3TNV76
Net Power	17.7 HP
Displacement	40 in³
Gross Power - ISO 14396	24.3 HP
Rated Net Power - 2,200 rpm - ISO 9249	17.7 HP

Weights

Operating Weight	3810 lb
Operating Weight - With Cab	3792 lb
Operating Weight - With Cab and Extending Undercarriage	4068 lb
Operating Weight - With Canopy	3550 lb
Operating Weight - With Canopy and Extending Undercarriage	3825 lb

Travel System

Gradeability	30°/58%
Travel Speed	2.8 km/h/5.6 km/h (1.74 mph/3.48 mph)

Hydraulic System

Operating Pressure - Equipment	2900 psi
Operating Pressure - Travel	2900 psi
Operating Pressure - Swing	1813 psi
Auxiliary Circuits - Primary	30 L/min at 170 bar (8 gal/min at 2,465 psi)
Auxiliary Circuits - Secondary	17 L/min at 200 bar (4.5 gal/min at 2,900 psi)
Maximum Bucket Force	4226 lb
Maximum Stick Force - Long Stick	2203 lb
Maximum Stick Force - Standard Stick	2518 lb
Pump Flow at 2,200 rpm	1.7 gal/min

Blade

Width	39 in
Height	9 in
Dig Depth - Standard Blade	12.5 in
Lift Height - Standard Blade	8 in

Påfyllingskapasitet

Fuel Tank Capacity	6.3 gal (US)
Hydraulic Tank Capacity	5.5 gal (US)

Dimensions (Approximate) - Standard Stick

Boom Swing Angle - LH	77°/64°
Boom Swing Angle - RH	48 °
Height	7.51 ft
Length - Undercarriage - Extending	5.25 ft
Length - Undercarriage - Fixed	4.74 ft
Maximum Boom Offset - LH	1.18 ft
Maximum Boom Offset - RH	1.71 ft
Maximum Dig Height	11.43 ft
Maximum Digging Depth	7.22 ft
Maximum Dozer Dig Depth	1 ft
Maximum Dozer Lift Height	8 in
Maximum Dump Height	8.2 ft
Maximum Reach - Ground Level	12.14 ft
Maximum Vertical Dig Depth	4.69 ft
Tail Swing Radius	3.84 ft
Transport Length - Arm Lowered	12.65 ft
Undercarriage Width - Extended	4.27 ft
Undercarriage Width - Retracted	3.25 ft
Width	3.25 ft

Dimensions (Approximate) - Long Stick

Boom Swing Angle - LH	77°/64°
Boom Swing Angle - RH	48 °
Height	7.51 ft
Length - Undercarriage - Extending	5.25 ft
Length - Undercarriage - Fixed	4.74 ft
Maximum Boom Offset - LH	1.18 ft
Maximum Boom Offset - RH	1.71 ft
Maximum Dig Height	11.79 ft
Maximum Digging Depth	7.87 ft
Maximum Dozer Dig Depth	1 ft
Maximum Dozer Lift Height	8 in
Maximum Dump Height	8.56 ft
Maximum Reach - Ground Level	12.78 ft
Maximum Vertical Dig Depth	5.31 ft
Tail Swing Radius	3.84 ft
Transport Length - Arm Lowered	12.65 ft
Undercarriage Width - Extended	4.27 ft
Undercarriage Width - Retracted	3.25 ft
Width	3.25 ft

Operating Specifications

Machine Overhang	19.5 in
Stick Length - Long	46 in
Stick Length - Standard	39.6 in

Egenskaper

Features

Performance

Stability

An extending undercarriage and fold out dozer blade allow the machine to be configured for optimum performance. Blade extensions are retained with the dozer making them easy to use and ensuring that they are not lost.

Dozer Float

Ground levelling and finishing applications are fast and easy with the dozer float function engaged making site clean-up much more efficient.

Long Dozer Option

The optional longer dozer blade enables improved ‘dig to blade' characteristics to give easier on site clean up.

100% Pilot Controls

Delivers excellent machine control and lifetime ‘as new' performance eliminating the need for linkage and cable maintenance, lowering owning and operating costs and resulting in less downtime.

Dig Force

The new 301.7D boasts high bucket and stick forces making it an impressive and productive excavator. The choice of two stick lengths allows the customer to configure his machine to deliver even higher stick forces or reach.

Versatility

High Flexibility

Compact in size and with a transport weight under 2000 kg (4,500 lb), the 301.7D can be transported easily using a conventional trailer and pick up truck or transit van. The sturdy hoisting eyelets on the cab roof enable the easy and rapid relocation of the machine between sites.

Automatic Swing Lock

Safe transportation of the machine is aided by the Cat automatic swing lock which locks the machines upper body in place when the control console is raised or the engine is stopped.

Work Tools

A range of work tools are available including buckets, hammer and auger to take advantage of the machines versatility. All these tools are matched to the machine to optimize performance and deliver excellent value through productivity and long life.

Auxiliary Hydraulics as Standard Fit

Machine is ‘ready to work'. Hammer and two way lines complete with quick disconnect fittings as standard. Connections are located close to the tool to reduce hose lengths and any potential damage. Additional line options are available to further increase machine versatility. Stick and bucket cylinder hoses are protected by routing them through the boom.

Auxiliary Flow Control

Machines configured with proportional auxiliary hydraulics, include the ability to adjust the flow for even greater tool control. Especially useful with tools such as angling ditching buckets.

Productive Comfort

Cab Comfort

The Cat 301.7D gives the operator a large comfortable space in which to work. The ergonomic control layout, travel pedals and adjustable wrist resets are engineered to minimize operator fatigue and increase productivity. The layout is designed for easy cleaning, minimizing downtime between jobs. There is a choice of cab with heater or canopy available. The canopy offering two sided access for even greater on site versatility.

Split Front Window

The lower front window section slides into the upper section frame. Both sections are then raised and stored in the roof using a gas assisted mechanism. This allows the operator to position in front window to suit their visibility and ventilation requirements with easy storage.

Engine and Serviceability

Powerful Engine

The Cat 301.7D is fitted with a 17.9 kW (24.3 hp) gross power engine that is installed at a much lower rated 13.2 kW (17.7 hp). This is designed to reduce engine wear, give cooler running temperatures, with longer life and lower owner and operating costs.

Excellent Service Access

Daily checks and regular service points including fuel and hydraulic oil fill are easily reached via the large steel rear door. The main hydraulic valve and lines are also easily reached through a removable floor plate and side panels. The machine has durable steel body panels all around, offering good resistance to impact damage and helping to maintain the machine's appearance and value.

Customer Support - Unmatched Support Makes the Difference

Your Cat dealer is ready to assist you with your purchase decision and everything after.

Financing packages are flexible to meet your needs
Unmatched parts availability keeps you working
Make comparisons of machines, with estimates of component life, preventative maintenance and cost of production
For more information on Cat products, dealer services and industry solutions, visit www.cat.com

Kontakt

Ta kontakt hvis du har spørsmål.