Cat 914

Compact Wheel Loaders

View brochure Request quotation

About the Cat 914

The Cat® 914 Compact Wheel Loader features a C3.6 engine, the Cat Optimized Z-bar Loader linkage, various work tools, a state-of-the-art electro-hydraulic system, a tuned drivetrain, a cab with all-around visibility, extended service intervals and excellent service access, and standard fuel savings features.

Specifications

Engine

Maximum Gross Power - Rated Engine Speed	1800 r/min
Maximum Gross Power - ISO 14396	110 HP
Maximum Gross Power - ISO 14396 (metric)	112 HP
Rated Net Power - Rated Engine Speed	2200 r/min
Rated Net Power - SAE J1349	99 HP
Rated Net Power - ISO 9249	98 HP
Maximum Gross Torque - SAE J1995	335 ft·lbf
Maximum Gross Torque - ISO 14396	332 ft·lbf
Maximum Net Torque - SAE J1349	329 ft·lbf
Maximum Net Torque - ISO 9249	327 ft·lbf
Displacement	220 in³
Bore	3.85 in
Stroke	4.72 in
Engine Model	Cat C3.6
Emissions	Engine meets Tier 4 Final/Stage V emission standards.
Note	Net power advertised is the power available at the flywheel plus front drive implement pump when the engine is equipped with fan, air cleaner, muffler and alternator.

Weights

Operating Weight

19103 lb

Buckets

Bucket Capacities	1.3-1.9 m3 (1.7-2.5 yd3)
Bucket Capacities - General Purpose	1.3-1.9 m³ (1.7-2.5 yd³)
Bucket Capacities - Light Material	2.5-3.5 m³ (3.3-4.6 yd³)

Steering

Maximum Flow - Steering Pump	22 gal/min
Number of Steering Wheel Turns - Full Left to Full Right or Full Right to Full Left	3.75 turns
Steering Cycle Times - Full Left to Full Right - At 2,350 rpm: 90 rpm Steering Wheel Speed	2.8 s
Maximum Working Pressure - Steering Pump	3263 psi
Steering Articulation Angle - Each Direction	40 °

Loader Hydraulic System

Relief Pressure - Tilt Cylinder - 3rd Function Maximum Working Pressure	3046 psi
Maximum Flow - Implement Pump	39 gal/min
Maximum Flow - Implement Pump - 3rd Function, Maximum Flow, Standard	24 gal/min
Relief Pressure - Tilt Cylinder - 4th Function Maximum Working Pressure	3046 psi
Hydraulic Cycle Time - Total Cycle Time	12.5 s
Hydraulic Cycle Time - Raise, Ground Level to Maximum Lift	5.2 s
Maximum Flow - Implement Pump - 4th Function, Maximum Flow	24 gal/min
Hydraulic Cycle Time - Dump, at Maximum Reach	1.4 s
Relief Pressure - Tilt Cylinder	4931 psi
Maximum Flow - Implement Pump - 3rd Function, Maximum Flow, High	32 gal/min
Maximum Working Pressure - Implement Pump	4061 psi
Hydraulic Cycle Time - Rackback	2.2 s
Hydraulic Cycle Time - Float Down, Maximum Lift to Ground Level	3.7 s

Service Refill Capacities

Cooling System	5.7 gal (US)
Fuel Tank	43.6 gal (US)
Note	DEF used in Cat SCR systems must meet the requirements outlined in the International Organization for Standardization (ISO) standard 22241-1.
Axles - Rear Center Differential	2 gal (US)
Hydraulic System - Including Tank	25.9 gal (US)
Diesel Exhaust Fluid (DEF) Tank	4.8 gal (US)
Engine Crankcase	2.6 gal (US)
Hydraulic Tank	14.5 gal (US)
Transmission	0.8 gal (US)
Axles - Front Center Differential	2 gal (US)

Transmission

Note	*Creeper Control allows speed control from a stand still up to 10 km/h (6.3 mph). The Creeper Control will only work in Range 1.
Forward and Reverse - Speed Range 3	25 mile/h
Forward and Reverse - Speed Range 1*	6.3 mile/h
Forward and Reverse - Speed Range 2*	12.5 mile/h

Tires

Other Choices Include	17.5 R25 L3 XHA2; 17.5-25 L2/L3 SGL; 17.5-25 L3 HRL D/L-3A; 17.5 R25 L2 Snow; 17.5 R25 Solid
Note (1)	Other tire choices are available. Contact your Cat dealer for details.
Standard Size	17.5 R25 L2 XTLA
Note (3)	Caterpillar recommends that you consult a tire supplier to evaluate all conditions before selecting a tire model.
Note (2)	In certain applications, the loader’s productive capabilities may exceed the tire’s tonnes-km/h (ton-mph) capabilities.

Cab

ROPS	ISO 3471:2008
FOPS	EN ISO 3449:2008 (ISO 3449:2005)
Note (4)	*The measurements were conducted with the cab doors and windows closed.
Note (2)	The declared dynamic operator sound pressure levels per ISO 6396:2008*, when the cab is properly installed and maintained, is 77 dB(A).
Note (3)	The labelled sound power level for the CE marked configurations when measured according to the test procedure and conditions specified in 2000/14/EC (as amended by 2005/88/EC) is 103 dB(A).
Note (1)	Cab and Rollover Protective Structures (ROPS) are standard in North America and Europe.

Axles

Rear	Oscillating ±11 degrees; Locking differential (Standard)
Front	Fixed; Locking differential (standard)

Features

Cat® C3.6 Engine

EU Stage V and U.S. EPA Tier 4 Final compliant.

Cat Optimized Z-bar Loader Linkage

The Cat Optimized Z-bar Loader linkage combines the digging efficiency of a traditional Z-bar with tool carrier capabilities for great performance and versatility. With parallel lift and high tilt forces throughout the working range you can safely and confidently handle loads with precise control.

Work Tools

The 914 features the Cat exclusive, Performance Series Buckets, as well as high visibility pallet forks. These tools enhance productivity and are available with either an Integrated Toolcarrier (IT), ISO (wide) and Fusion™ coupler style. Legacy coupler tools such as brooms, grapple buckets, multi-purpose buckets and other work tools remain compatible.

Hydraulics and Controls

State of the art electro-hydraulic system provides low effort, fine control with fast cycle times. All-in-one joystick helps keep eyes on the work. Operator can adjust machine responsiveness with the push of a button, which allows the operator to set up the machine exactly the way they want it based on the application. High Flow option allows for the use of even the most demanding work tools.

Tuned Drivetrain

Smooth shifting and powerful acceleration is matched with modulated hydrostatic braking in the inching/braking pedal, creating a rhythm for material moving. Creeper and electronic engine speed control makes broom and snow blower work easy. Operator tunes between smooth or aggressive shifting with the push of a button.

Cab

All around visibility is further enhanced with the availability of a rearview camera. The deluxe cab ensures operator comfort with a heated, air suspension seat and easy to use controls. Available features such as Implement and Hystat Aggressiveness, Ride Control, Lift and Tilt Kickouts, Fork/Bucket mode and Rimpull Control allow the operator to customize the machine via a soft touch keypad.

Serviceability

Extended service intervals and excellent service access make daily checks quick and easy allowing you to get to work sooner.

Efficiently Powerful

Efficiently Powerful with its high full turn tipping loads, powerful breakout forces and efficient engine power delivers a balanced solution for all customer applications.