Cat D3

Små dosere

Nettoeffekt: 77,6 kW/104 hk

Driftsvekt: 9,8 tonn

Skjær: 2,1 m³

Nye Cat D3 erstatter D5K

Se brosjyre Send Forespørsel

Om Cat D3

Cat D3 er en nyhet som leverer utmerket ytelse og det bredeste valget av teknologi funksjoner til å hjelpe deg med å få mest mulig ut av din doser. Smidig og lydhør, den har kraft for dosing og finarbeid for graderingsarbeid. Full hydrostatisk transmisjon gir den en sømløs akselerasjon så du kan utføre jobben raskt. Lastfølingssystemet optimaliserer automatisk bakkehastigheten basert på last for størst produktivitet og drivstoffeffektivitet.

Spesifikasjoner

Motor

Motormodel	Cat® C3.6
Nettoeffekt	104 HP
Displacement	220 in³
Net Power - 2,200 rpm - SAE J1349	104 HP
Net Power - 2,200 rpm - ISO 9249/EEC 80/1269	104 HP
Note (1)	Net power is tested per ISO 9249:2007 and SAE J1349:2011 and as advertised is the power available at the ﬂywheel when the engine is equipped with fan, air intake system, exhaust system and alternator.
Note (2)	All non-road U.S. EPA Tier 4 Final, EU Stage V, Japan 2014 (Tier 4 Final) and Korea Tier 4 Final diesel engines are required to use only Ultra Low Sulfur Diesel (ULSD) fuels containing 15 ppm EPA/10 ppm EU (mg/kg) sulfur or less.

Engine

Power Train

Hydrostatic

Weights

Operating Weight

20640 lb

Weights

Operating Weight - LGP	21369 lb
Operating Weight - LGP, 762 mm/30 in	21810 lb
Note (2)	For machine with ripper, add 554 kg (1,222 lb).
Note (1)	Specifications shown are for machine equipped with dozer blade, EROPS cab, back-up alarm, operator, coolant, lubricants and full fuel tank.

Cab

ROPS	ISO 3471:2008
FOPS	ISO 3449:2005 Level II

Transmission

Drive Pumps	1
Maximum Travel Speed - Forward	5.6 mile/h
Maximum Travel Speed - Reverse	6.2 mile/h
Track Motors	2
Relief Valve Settings	7033 psi

Undercarriage

Shoe Width - Standard	20 in
Ground Pressure - LGP	4.5 psi
Track Gauge - LGP	69 in
Length - Track on Ground - LGP	91 in
Number of Shoes - Each Side - Sealed and Lubricated Track (SALT) Undercarriage	40
Ground Pressure - LGP, 762 mm (30 in)	3.9 psi
Length - Track on Ground - LGP, 762 mm (30 in)	91 in
Shoe Width - LGP	26 in
Shoe Width - LGP, 762 mm (30 in)	30 in
Track Gauge	63 in
Number of Rollers - Each Side	7
Track Gauge - LGP, 762 mm (30 in)	73 in

Undercarriage

Ground Pressure	5.7 psi
Length of Track on Ground	91 in
Number of Shoes - Each Side - Abrasion Undercarriage	36

Påfyllingskapasitet

Cooling System	5 gal (US)
Final Drive - Each - LGP	2.6 gal (US)
Crankcase - With Filter	2.8 gal (US)
Diesel Exhaust Fluid (DEF) Tank	4.9 gal (US)
Transmission - Hydraulic Tank	23.8 gal (US)
Drivstofftank	51.5 gal (US)

Service Refill Capacities

Final Drives - Each Side

2.6 gal (US)

Hydraulic Controls

Pump Output	17.2 gal/min
Relief Valve Settings	2988 psi

Ripper

Type	Parallelogram
Number of Shanks	3
Height	6.5 in
Weight	1222 lb
Maximum Digging Depth	13.3 in
Maximum Reach - Ground Line	30.2 in
Overall Width	67.3 in
Maximum Ground Clearance Under Tip	17.6 in

Winch

Weight	1345 lb
Winch Drive	Hydrostatic
Control	Hydraulic
Speed	Variable
Maximum Line Pull - Full Drum	25000 lb
Throat Clearance	6.75 in
Rope Diameter - Recommended	0.63 in
Overall Width	29.2 in
Maximum Line Speed - Full Drum	207 ft/min
Rope Diameter - Optional	0.75 in
Maximum Line Pull - Bare Drum	40000 lb
Drum Capacity - Optional Cable	256 ft
Winch Length	27.76 in
Drum Width	10.8 in
Maximum Line Speed - Bare Drum	131 ft/min
Drum Capacity - Recommended Cable	371 ft
Drum Diameter	10 in

Air Conditioning System

Air Conditioning

The air conditioning system on this machine contains the ﬂuorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.8 kg of refrigerant which has a CO2 equivalent of 2.574 metric tonnes.

Dimensjoner

Bredde - Traktor - Standard belteplater - Uten skjær - LGP	92.9 in
BLADE: Blade Width - LGP	126.7 in
BLADE: Maximum Tilt - Intermediate	17.7 in
Track Gauge - LGP, 762 mm (30 in)	73 in
BLADE: Digging Depth - LGP	22.5 in
Track Gauge - LGP	67.9 in
BLADE: Blade Capacity (SAE) - LGP	3.06 yd³
BLADE: Blade Width - Intermediate	115 in
Width - Tractor - Standard Shoes - No Blade - LGP (762 mm/30 in)	103.5 in
BLADE: Blade Lift Height - Intermediate	30.2 in
Length - Basic Tractor - Without Blade - LGP	128.7 in
BLADE: Blade Width at Maximum Angle - LGP	115.8 in
Tractor Height - LGP	109 in
BLADE: Blade Cutting Edge Angle, Adjustable - LGP	52° to 58°
Ground Clearance - LGP, 762 mm (30 in)	13 in
BLADE: Digging Depth - Intermediate	22.5 in
BLADE: Blade Height - LGP	39.8 in
Length - Basic Tractor - Without Blade - LGP, 762 mm (30 in)	128.7 in
BLADE: Blade Lift Height - LGP	30.2 in
BLADE: Blade Cutting Edge Angle, Adjustable - Intermediate	52° to 58°
Ground Clearance - LGP	13 in
Overall Length - With Blade - LGP, 762 mm (30 in)	169.6 in
BLADE: Blade Height - Intermediate	39.8 in
BLADE: Blade Width at Maximum Angle - Intermediate	105.1 in
BLADE: Blade Capacity (SAE) - Intermediate	2.73 yd³
Overall Length - With Blade - LGP	169.6 in
BLADE: Maximum Angle (either side) - Intermediate	25°
BLADE: Maximum Tilt - LGP	17.7 in
Tractor Height - LGP, 762 mm (30 in)	109 in
BLADE: Maximum Angle (either side) - LGP	25°

Dimensions

Length - Basic Tractor - Without Blade - Standard	128.7 in
BLADE: Blade Capacity (SAE) - Standard	2.86 yd³
Track Gauge - Standard	63 in
Width - Tractor - Standard Shoes - No Blade - Standard	83 in
BLADE: Digging Depth - Standard	23.1 in
BLADE: Blade Lift Height - Standard	30.2 in
Tractor Height - Standard	109 in
Ground Clearance - Standard	13 in
Overall Length - With Blade - Standard	170.7 in
BLADE: Blade Cutting Edge Angle, Adjustable - Standard	52° to 58°
BLADE: Blade Height - Standard	42.2 in
BLADE: Maximum Tilt - Standard	15.8 in
Note	Abrasion Undercarriage
BLADE: Blade Width - Standard	109.5 in
BLADE: Blade Width at Maximum Angle - Standard	103.8 in
BLADE: Maximum Angle (either side) - Standard	25°

Egenskaper

IMPROVED VISIBILITY

New sloped hood provides better visibility to the work in front of the blade as well as the overall job site. Better visibility can equal less operator fatigue and more confidence in your work.

GRADE TECHNOLOGY

Scalable 2D and 3D Cat Grade provide technologies like Slope Assist, Stable Blade, and Slope Indicate for easier and more efficient operation, as well as the flexibility to adapt different technology based on job site demands.

UP TO 10% IMPROVED FUEL ECONOMY

The D2 features the lowest fuel consumption in this size class with the same great performance you've come to expect. Up to 20% improvement and no performance sacriﬁce when ECO mode is active.

COMFORTABLE WORK SPACE

The spacious and comfortable cab features an optional heated and ventilated seat, along with heated joystick controls to make the operator comfortable no matter what the conditions are outside. The seat height and armrests can be easily adjusted to the operator’s preference.

BIGGER, BETTER DISPLAY WITH CAMERA

This new and improved optional 10 in (254 mm) touchscreen, color display is easy to use, with a great view of machine settings, rearview camera and Slope Indicate/Slope Assist screens. The large reversing camera gives the operator better visibility to the job site.

DURABLE UNDERCARRIAGE

The D2 is available with either a Sealed and Lubricated Track (SALT) or Abrasion undercarriage to best suit your application. The undercarriage has a longer life resulting in less down time. A one piece mainframe/track roller frame design and the large, double reduction planetary final drive allow the machine to push heavy loads.