Cat 330 GC - Tier 4 / Stage V

Gravere 21-37 tonn

Maskinvekt: 33 tonn
Skuffestr.: 1 700 l
Bruttoeffekt: 151 kW/ 202 hk

Hva er en GC-maskin?

Se brosjyre Send Forespørsel

330 GC Hydraulic Excavator with a full bucket of dirt

330 GC Hydraulic Excavator digging a utility trench

330 GC Hydraulic Excavator loading a dump truck with dirt

330 GC Excavating and dumping dirt into a truck

Standard GC utstyr

Komfort ROPS førerhytte med mekanisk avfjæret førerstol
Elektrisk fyllepumpe for diesel med autostopp
8" LCD-monitor med touchskjerm
DAB radio
Standard lyspakke
Kamera med sikt bakover og til høyre
Slangebruddsventil på bom- og stikkekrets

GC Kampanjeutstyr

Rototilt: EC233 S70/70
Hurtigkobling: S70 med Securelock
Pusseskuffe Cat SD 1.450l
Graveskuffe SMP 1 550 l
Lincoln Sentralsmøring
2 stk lys på motvekt
Laminert frontrute
Tema 7500

CAT GC - ØKONOMISKE MASKINER

GC er Caterpillar sine standardmaskiner som er noe lettere utstyrt enn premium - modellene. GC er for deg som ønsker en lønnsom maskin, til oppdrag som ikke krever bruk av banebrytende teknologi. Maskinene er lettere utstyrt, designet drivstoffeffektive- og med lave eier og driftskostnader. Caterpillar GC er et verditilbud til kundene som ikke ønsker å betale for en løsning de ikke trenger. Samtidig får du den samme pålitelige Cat- merkevaren med høy ytelse, holdbarhet, originale deler, enkel å bruke og med samme kvalitet, i tillegg til at GC-maskinene selvsagt oppfyller utslippsstandardene.

Cat 330 GC har blant annet:

Inntill 25% lavere vedlikeholdskostnader
Opp til 10 % lavere drivstofforbruk (sammenlignet med Cat 313).
Mulighet for en rekke Cat worktools (arbeidsredskaper)
Kjernekomponentene i maskinen er de samme som premium-modellen, Cat 313.
Nye filter for drivstoff, hydraulikkolje og luft, som gir utvidet levetid
Stor hytte med ergonomisk kontroll og forbedret sikt for komfort og sikkerhet.
Flere effektmodus gjør at du kan tilpasse maskinen til arbeidsoppgaven.

Vil du vite mer om Cat GC, og forskjellen mellom GC og Premium?

Les mer om Cat GC gravemaskiner

Spesifikasjoner

Motor

Net Power - ISO 9249	150 kW
Net Power - ISO 9249 (DIN)	204 hp (metric)
Motormodel	Cat C7.1
Engine Power - ISO 14396	151 kW
Engine Power - ISO 14396 (DIN)	205 hp (metric)
Bore	105 mm
Stroke	135 mm
Displacement	7.01 l
Biodiesel Capability	Up to B20¹
Emissions	Meets U.S. EPA Tier 4 Final, EU Stage V, Korea Stage V, and Japan 2014 emission standards.
Note (1)	Net power advertised is the power available at the flywheel when the engine is equipped with fan, air intake system, exhaust system, and alternator with engine speed at 2,200 rpm. Advertised power is tested per the specified standard in effect at the time
Note (2)	¹Cat diesel engines are required to use ULSD (ultra-low sulfur diesel fuel with 15 ppm of sulfur or less) or ULSD blended with the following lower-carbon intensity fuels** up to: 20% biodiesel FAME (fatty acid methyl ester)* or 100% renewable diesel, HVO

Hydraulic System

Main System - Maximum Flow	560 L/min (148 gal/min)
Maximum Pressure - Equipment	35000 kPa
Maximum Pressure - Travel	35000 kPa
Maximum Pressure - Swing	28400 kPa

Swing Mechanism

Swing Speed	11.5 r/min
Maximum Swing Torque	105 kN·m

Weights

Operating Weight	30900 kg
Note	Long undercarriage, Reach boom, R3.2 m (10'6") stick, Heavy Duty (HD) 1.54 m³ (2.01 yd³) bucket, 800 mm (31") triple grouser shoes and 6700 kg (14,770 lb) counterweight.

Påfyllingskapasitet

Fuel Tank Capacity	474 l
Cooling System	25 l
Engine Oil	25 l
Swing Drive - Each	10 l
Final Drive - Each	5.5 l
Hydraulic System - Including Tank	310 l
Hydraulic Tank	147 l
DEF Tank	41 l

Dimensjoner

Boom	Reach 6.15 m (20'2")
Stick	Reach 3.2 m (10'6")
Bucket	HD 1.54 m³ (2.01 yd³)
Shipping Height - Top of Cab	3050 mm
Handrail Height	3050 mm
Shipping Length	10420 mm
Tail Swing Radius	3130 mm
Counterweight Clearance	1110 mm
Ground Clearance	490 mm
Track Length	4860 mm
Length to Center of Rollers	3990 mm
Track Gauge	2590 mm
Transport Width	3190 mm

Working Ranges & Forces

Maximum Digging Depth	7260 mm
Boom	Reach 6.15 m (20'2")
Stick	Reach 3.2 m (10'6")
Bucket	HD 1.54 m³ (2.01 yd³)
Maximum Reach at Ground Level	10690 mm
Maximum Cutting Height	10020 mm
Maximum Loading Height	6930 mm
Minimum Loading Height	2280 mm
Maximum Depth Cut for 2440 mm (8 ft) Level Bottom	7100 mm
Maximum Vertical Wall Digging Depth	6030 mm
Bucket Digging Force - ISO	179 kN
Stick Digging Force - ISO	126 kN

Air Conditioning System

Air Conditioning

The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 0.85 kg (1.9 lb) of refrigerant which has a CO2 equivalent of 1.216 metric tonnes (1.340 tons).

Sustainability

Recyclability

97%

Egenskaper

LATEST FEATURES

Cab Monitor Improvements

Continuously improved user interface allows for intuitive navigation, minimizing performance interruption with the easy-to-use touchscreen menu.
Identify apps quickly with a grid list view, abbreviated app names, and categorized menu options.
A notification center keeps important information visible to the operator, and displays messages without shrinking the camera view.
Color coded notifications set critical messages apart from the rest.
Use the in-monitor QR code to learn about machine and technology features through a full suite of “how-to” videos.

Not all features are available in all regions. Please check with your local Cat dealer for specific offering availability in your area. Build Number: 07F

PERFORMANCE AND PRODUCTIVITY

Use up to 12% less fuel than the 330F Excavator in similar applications.
The C7.1 engine meets U.S. EPA Tier 4 Final, EU Stage V, Korea Stage V, and Japan 2014 emission standards with an after-treatment system that requires no maintenance or downtime.
The advanced hydraulic system provides the optimum balance of power and efficiency while giving you the control you need for precise digging requirements.
Valve priority puts hydraulic pressure and flow where you command it to go for fast light- to medium-load cycle times
Match the excavator to the job with power modes; let Smart mode automatically match engine and hydraulic power to digging conditions.
Advansys™ bucket tips increase penetration and improve cycle times. Tip changes can be done quickly with a simple lug wrench instead of a hammer or special tool, improving safety and uptime.
Auxiliary hydraulic options give you the versatility to use a wide range of Cat attachments.

BUILT TO PERFORM

Work up to 3000 m (9,840 ft) above sea level without de-rating.
Don’t let the temperature stop you from working. The excavator has a standard high-ambient temperature capability of 52° C (125° F) and cold start capability of –18° C (0° F). An optional – 32° C (–25° F) cold start package is available.
Auto warm up speeds up hydraulic oil warming in cold temperatures and helps prolong the life of components.
Two levels of fuel filtration protect the engine from dirty diesel fuel.
Grease sealed between track pins and bushings reduces travel noise and prevents debris from entering to increase undercarriage life.
The track guiding guard helps keep the excavator track aligned when traveling and working on slopes.
The sloped track frame prevents mud and debris accumulation, helping reduce risk of track damage.

DESIGNED FOR OPERATORS

The cab has a wide seat that adjusts for operators of all sizes.
Control the excavator comfortably with easy-to-reach controls all located in front of you.
Standard automatic climate control keeps you at the right temperature all shift long.
Advanced viscous mounts reduce cab vibration by up to 50% over previous excavator models.
Stow your gear with plenty of in-cab storage beneath and behind the seat, overhead, and in the consoles. A cup holder, document holder, bottle holder, and coat hook are also provided.
Use the standard radio’s USB ports and Bluetooth® technology to connect to personal devices.

SIMPLE TO OPERATE

Start the engine with a push button; use a Bluetooth® key fob, or the unique Operator ID function.
Program your power mode and joystick preferences using Operator ID; the excavator will remember what you set each time you go to work.
Navigate quickly on the standard high-resolution 203 mm (8 in) touchscreen monitor or with the aid of the jog dial control.
Use the in-monitor QR code to learn about machine and technology features through a full suite of “how-to” videos.
Protect your hammer tool from overheating and rapid wear. Auto hammer stop warns you after 15 seconds of continuous firing and then automatically shuts it off after 30 seconds - all to extend the tool’s service life.
Find the tool you need – even if it’s hidden beneath overgrowth or debris. The optional Bluetooth reader can search for any work tool equipped with Cat asset tracking devices up to a range of 60 meters (200 feet).
Make moving the excavator much easier with Cat Stick Steer. Simply push a button and use one hand to travel and turn instead of both hands or feet on levers or pedals.

LOWER MAINTENANCE COSTS

Expect up to 25% less maintenance cost than the 330F (savings calculated over 12,000 machine hours).
Do all daily maintenance at ground level.
Check engine oil level quickly and safely with the ground-level engine oil dipstick; fill and check engine oil on top of the machine with a conveniently located second dipstick.
Track your excavator’s filter life and maintenance intervals via the in-cab monitor.
No required maintenance on the Cat Clean Emissions Module.
Expect the latest air intake filter with pre-cleaner to last up to 1,000 hours – a 100% increase over the previous filter.
The latest hydraulic oil filter provides improved filtration performance, anti-drain valves to keep oil clean when the filter is replaced, and longer life with a 3,000-hour replacement interval – 50% longer than previous filter designs.
High-efficiency cooling fans run only when needed; you can program intervals so they automatically reverse to keep cores clean without interrupting your work.
Boost productivity with proactive service reminders. The integrated vehicle health management system alerts the operator with step-by-step service guidance, along with parts needed, so you don't experience any unnecessary downtime.
S·O·S^SM ports simplify maintenance and allow for quick, easy extraction of fluid samples for analysis.

SAFELY HOME EVERY DAY

Access 100% of daily maintenance points from ground level – no need for you to climb on top of the excavator.
Keep your excavator secure with Operator ID. Use your PIN code on the monitor to enable the pushbutton starting feature.
The standard ROPS cab meets ISO 12117-2:2008 requirements.
Enjoy great visibility into the trench, in each swing direction, and behind you with the help of smaller cab pillars, larger windows, and a flat engine hood design. A rearview camera and a right-side-view camera are standard.
The latest right service platform design provides easy, safe, and quick access to upper service platform; the service platform steps use anti-skid punch plate to prevent slipping.
The standard hydraulic lockout lever isolates all hydraulic and travel functions in the lowered position.
Ground-level shut-off switch stops all fuel to the engine when activated and shuts down the machine.
Enhance jobsite safety. Add a swing alarm to alert people when you're rotating from trench to stockpile and back again.
Make service work easier and safer with optional inspection lighting. With the flip of a switch, lights will illuminate the engine, pump, battery, and radiator compartments to enhance visibility.

TAKE THE GUESSWORK OUT OF MANAGING YOUR EQUIPMENT

VisionLink® provides actionable data insights for all assets - regardless of fleet size or equipment manufacturer.* Review equipment data from your desktop or mobile device to maximize uptime and optimize assets. Dashboards provide information such as hours, miles, location, idle time, and fuel utilization. Make informed decisions that lower costs, simplify maintenance, and improve safety and security on your jobsite.
VisionLink Productivity gathers and summarizes machine telematics and jobsite data from all your equipment – regardless of the manufacture.* View actionable information such as idle time, fuel burn, location, payload, load counts, total cycles, and more to improve machine efficiency, productivity, and utilization. Access data anywhere via a mobile, tablet, or desktop device - on or off the jobsite.
Remote Flash is a mobile application that allows you to update onboard software without a technician being present, allowing you to initiate software updates when convenient, increasing your overall operating efficiency.

* Data field availability can vary by equipment manufacturer.

TAKE THE GUESSWORK OUT OF MANAGING YOUR EQUIPMENT

SUSTAINABILITY

The Cat® C7.1 engine meets U.S. EPA Tier 4 Final, EU Stage V, Korea Stage V, and Japan 2014 emission standards.
The 330 GC emits up to 9% less CO2 than the previous 330F.*
Cat diesel engines are required to use ULSD (ultra-low sulfur diesel fuel with 15 ppm of sulfur or less) or ULSD blended with the following lower-carbon intensity fuels*** up to: 20% biodiesel FAME (fatty acid methyl ester)** or 100% renewable diesel, HVO (hydrogenated vegetable oil) and GTL (gas-to-liquid) fuels. Refer to guidelines for successful application. Please consult your Cat dealer or “Caterpillar Machine Fluids Recommendations” (SEBU6250) for details.
Cat VisionLink® displays the CO₂emissions for monitored assets, calculated by fuel type for the Runtime Fuel Burned each day in a selected date range.
Remote Flash minimizes downtime and maintenance time while keeping your asset running with maximum efficiency. Alerts for machine updates are sent virtually from your Cat dealer and updates can be deployed without a dealer technician needing to be onsite.
Auto Engine Speed Control helps reduce unnecessary fuel burn and greenhouse gas emissions by allowing the engine to automatically go into idle mode when the machine is not working.
When engaged, one-touch idle helps operators conserve fuel and reduce greenhouse gas emissions by lowering engine speed when the machine is under no load and return to normal operating speed when desired.
Engine Idle Shutdown Timer reduces fuel burn, greenhouse gas emissions and unnecessary idle time by shutting down the machine after a pre-set idling period.
Cat Scheduled Oil Sampling (S·O·S^SM) Services helps reveal excessive wear, contaminated fluids or other “unseen” issues that can shorten component life. In many cases, you can extend oil and coolant change intervals by using fluid monitoring. Consult your Cat dealer or the machine's operation and maintenance manual for more information.
Extended maintenance intervals not only reduce downtime but decrease the amount of fluid and filters that are replaced over the life of the machine.
A well-trained operator is worth the investment. Skilled operators benefit your bottom line by maximizing productivity, avoiding costly downtime, and maintaining jobsite safety – which can help to improve fuel efficiency and reduce greenhouse gas emissions.

*All comparisons to 330F. Productivity, fuel and CO2 emissions vary by application. CO2 emissions calculations based on a reference work cycle using 2.2 U.S. gallons per hour of #2 U.S. diesel fuel based. Applies IPCC2006 methodology using U.S. EPA Emissions Hub emission factors. Includes DEF (diesel exhaust fluid) related CO2. Fuel measurements are at 15°C. Estimated average fuel consumption improvements are based on tests or Product Link™ data where available. Productivity improvements are based on test data.
**Engines with no aftertreatment devices can use higher blends, up to 100% biodiesel (for use of blends higher than 20% biodiesel, consult your Cat dealer).
***Tailpipe greenhouse gas emissions from lower-carbon intensity fuels are essentially the same as traditional fuels.