Cat 313 GC

Gravere 13-20 tonn

Maskinvekt: 13,8 tonn
Skuffestr.: 600 l
Bruttoeffekt: 55,4 kW/ 74 hk

Kampanjepris: 1.495.000 kr
Månedspris ved leasing: 25.297 kr.

Om Cat 313 GC

The Cat® 313 GC excavator matches its performance to your job. A new, larger cab with an ergonomic layout keeps you comfortable all shift long. Combined with fuel-saving features, longer maintenance intervals, and simplified maintenance points, the 313 GC provides the reliability you expect at the low-cost-per-hour you need.

Try & Buy kampanje

Vi spanderer transporten hvis du slår til!

KAMPANJEPRIS: KR 1.495.000 / 25.297 pr mnd* (FÅ IGJEN PÅ LAGER)

*Leasing via Cat Finance fra 25.297 kr/mnd

Ved 5 års leasing og 10% i forskudd.

Kampanjerente 4,95%

Dette er en per dags dato rente som kan avvike dersom det skjer endringer i penge markedet

STANDARD GC UTSTYR

Komfort ROPS førerhytte med mekanisk avfjæret førerstol
Elektrisk fyllepumpe for diesel med autostopp
8" LCD-monitor med touchskjerm
DAB radio
Standard lyspakke
Kamera med sikt bakover og til høyre
Slangebruddsventil på bom- og stikkekrets

GC KAMPANJEUTSTYR

TRS10 S60/S60
HK S60 Securelock
Pusseskuffe SD 500l
Graveskuffe SD 700l Lincoln Sentralsmøring
Laminert frontrute
Gjennomsiktig takluke
Bukplate

CAT GC - ØKONOMISKE MASKINER

GC er Caterpillar sine standardmaskiner som er noe lettere utstyrt enn premium - modellene. GC er for deg som ønsker en lønnsom maskin, til oppdrag som ikke krever bruk av banebrytende teknologi. Maskinene er lettere utstyrt, designet drivstoffeffektive- og med lave eier og driftskostnader. Caterpillar GC er et verditilbud til kundene som ikke ønsker å betale for en løsning de ikke trenger. Samtidig får du den samme pålitelige Cat- merkevaren med høy ytelse, holdbarhet, originale deler, enkel å bruke og med samme kvalitet, i tillegg til at GC-maskinene selvsagt oppfyller utslippsstandardene.

Cat 313 GC har blant annet:

Inntill 25% lavere vedlikeholdskostnader
Opp til 10 % lavere drivstofforbruk (sammenlignet med Cat 313).
Mulighet for en rekke Cat worktools (arbeidsredskaper)
Kjernekomponentene i maskinen er de samme som premium-modellen, Cat 313.
Nye filter for drivstoff, hydraulikkolje og luft, som gir utvidet levetid
Stor hytte med ergonomisk kontroll og forbedret sikt for komfort og sikkerhet.
Flere effektmodus gjør at du kan tilpasse maskinen til arbeidsoppgaven.

Vil du vite mer om Cat GC, og forskjellen mellom GC og Premium?

Les mer om Cat GC gravemaskiner

Spesifikasjoner

Motor

Net Power - ISO 9249	54.3 kW
Motormodel	Cat C3.6
Engine Power - ISO 14396	55.4 kW
Bore	98 mm
Stroke	120 mm
Displacement	3.6 l

Hydraulic System

Main System - Maximum Flow	247 L/min (65 gal/min)
Maximum Pressure - Equipment	35000 kPa
Maximum Pressure - Travel	35000 kPa
Maximum Pressure - Swing	26000 kPa

Swing Mechanism

Swing Speed	11.5 r/min
Maximum Swing Torque	35 kN·m

Weights

Operating Weight

13800 kg

Påfyllingskapasitet

Fuel Tank Capacity	258 l
Cooling System	15 l
Engine Oil	8 l
Final Drive - Each	3 l
Hydraulic System - Including Tank	85 l
Hydraulic Tank	70 l

Dimensjoner

Boom	Reach 4.65 m (15'3")
Stick	Reach R3.0 m (9'8")
Bucket	GD 0.53 m³ (0.69 yd³)
Shipping Height - Top of Cab	2810 mm
Handrail Height	2810 mm
Shipping Length	7780 mm
Shipping Length - with Blade	8050 mm
Tail Swing Radius	2190 mm
Counterweight Clearance	916 mm
Ground Clearance	446 mm
Track Length	3750 mm
Length to Center of Rollers	3040 mm
Track Gauge	1990 mm
Transport Width	2490 mm

Working Ranges & Forces

Maximum Digging Depth	6040 mm
Boom	Reach 4.65 m (15'3")
Stick	Reach R3.0 m (9'8")
Bucket	GD 0.53 m³ (0.69 yd³)
Maximum Reach at Ground Level	8660 mm
Maximum Cutting Height	8830 mm
Maximum Loading Height	6420 mm
Minimum Loading Height	1600 mm
Maximum Depth Cut for 2440 mm (8 ft) Level Bottom	5860 mm
Maximum Vertical Wall Digging Depth	5190 mm
Minimum Working Equipment Radius	2570 mm
Bucket Digging Force - ISO	98.67 kN
Stick Digging Force - ISO	59.29 kN

Air Conditioning System

Air Conditioning

The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 0.85 hg of refrigerant which has a CO2 equivalent of 1.216 metric tonnes.

Egenskaper

Latest Features

The new integrated vehicle health management system alerts the operator with service guidance and parts needed to enhance uptime.
Enhance visibility to make service work easier and safer with optional inspection lighting.
Make the jobsite safer with an optional swing alarm.

Not all features are available in all regions. Please check with your local Cat dealer for specific offering availability in your area.
Build Number: 07D

Fuel Saving Performance Matched to the Job

Use up to 10 percent less fuel than the 313F GC to keep you moving and productive on the jobsite.
Easily work on slopes and move around the jobsite with 10 percent more swing torque.
The advanced hydraulic system provides the optimum balance of power and efficiency while providing the control needed for precise digging requirements.
Smart mode meets your power needs by automatically matching engine and hydraulic power to digging conditions.
Get higher production in demanding applications, easier penetration into piles, and faster cycle times with Cat® Advansys™ bucket tips. Quickly change tips with a simple lug wrench instead of a hammer or special tool, improving safety and uptime.
Auxiliary hydraulic options give you the versatility to use a wide range of Cat attachments.
The Cat C3.6 engine meets U.S. EPA Tier 4 Final, EU Stage V, and Japan 2014 emission standards.
Product Link™ comes standard so you can remotely monitor machine health, location, hours, and fuel consumption on-demand through the VisionLink® online interface.

Lower Maintenance Costs

Expect up to 25 percent less maintenances costs than the 313F GC.
Quickly check and service your machine with all daily maintenance points accessible from ground level.
Check the engine oil level quickly and safely from the ground. Fill and check engine oil on top of the machine with a conveniently located second dipstick.
The new hydraulic oil filter provides improved filtration performance, anti-drain valves to keep oil clean when the filter is replaced, and longer life with a 3,000-hour replacement interval – 50 percent longer than previous filter designs.
The engine does not require diesel exhaust fluid (DEF).
Track your machine’s filter life and maintenance intervals on the in-cab monitor.
Boost productivity with proactive service reminders. The new Integrated Vehicle Health Management system alerts the operator with step-by-step service guidance along with parts needed so you don't experience any unnecessary downtime.
S·O·S^SMports are located at ground level, simplifying maintenance and allowing for quick, easy extraction of fluid samples for analysis. yeah

Work in Comfort in the All-New Cab

Increase operator productivity with an all-new, larger cab.
The cab has a wide seat that adjusts for operators of all sizes.
Advanced viscous mounts reduce cab vibration.
Control the excavator comfortably with easy-to-reach controls all located in front of you.
Stow your gear with plenty of in-cab storage beneath and behind the seat, overhead, and in the consoles.
Use the standard radio’s USB ports and Bluetooth® technology to connect personal devices and make hands-free calls.

Reliable, Whatever the Environment

Don’t let the temperature stop you from working. The 313 GC has a standard high-ambient temperature capability of 52° C (125° F) without de-rate and cold-start capability of -18° C (0° F).
Auto warm-up speeds up hydraulic oil warming in cold temperatures and helps prolong the life of components.
Grease sealed between track pins and bushings reduces travel noise and prevents debris from entering to increase undercarriage life.
The track guiding guard helps keep the excavator track aligned when traveling and working on slopes.
The sloped track frame prevents mud and debris accumulation, helping reduce the risk of track damage.

Simple to Operate

Start the engine with the push of a button, a Bluetooth key fob, or the unique Operator ID function.
Program your preferred power mode and joystick settings using your operator ID. The excavator will automatically remember your selections.
Navigate quickly on the standard high-resolution touchscreen monitor or with the aid of the jog dial control.
The Cat PL161 Attachment Locator is a Bluetooth device that makes finding your attachments and other gear quick and easy. The Cat App on your phone will locate the device automatically.
Not sure how a function works or how to maintain your machine? Simply access the operator’s manual through the touch screen monitor.

Safety

Access all daily maintenance points from ground level – no need for you to climb on top of the machine.
The standard ROPS cab meets ISO 12117-2:2008 requirements.
The standard hydraulic lockout lever isolates all hydraulic and travel functions in the lowered position.
A ground-level shut-off switch stops all fuel to the engine and shuts down the machine when activated.
A rearview and right-side-view camera are standard, increasing safety and visibility.
New service platform design provides easy, safe, and quick access to the upper service platform. Prevent slipping with the anti-skid punch plate on the platform steps.
Optional boom and stick lowering check valves prevent reverse flow, keeping your front linkage securely in place should the hydraulic system unexpectedly lose power.
Brightly colored seatbelts allow easy recognition of properly utilized safety restraints.
Enhance jobsite safety. Add a swing alarm to alert people when you're rotating from trench to stockpile and back again.
Make service work easier and safer with optional inspection lighting. With the flip of a switch, lights will illuminate the engine, pump, battery, and radiator compartments to enhance visibility.