Cat 303.5 CR

Minigravere 0.9-10 tonn

Maskinvekt: (fra) 3 600 kg
Skuffestørrelse: 165 L
Bruttoeffekt: 18.4 kW/ 24.7 hp
Korthekk

Se brosjyre Send Forespørsel

Kan leies via Pon Rental

Nyhet

Om Cat 303.5 CR

Cat 303.5 har kommet i ny drakt. Med de nye funksjonene som de andre minigraverne gjør denne maskinen arbeidsdagen til en lek.

Graveren kommer med LCD monitor, stick steer og cruise control.

Hytta på minigraveren er tiltbar, slik at du enkelt kan utføre vedlikehold og service.

Bruttoeffekt 25 hk (18 kW).

Cat C1.7 dieselmotor, EU Stage V.

Driftsvekt standard maskin med skuffe og hurtigkobling fra ca 3600 kg.

Stick steer
Intuitiv LCD-monitor
Cruise control
Tiltbar hytte
Flyt på skjær

Spesifikasjoner

Motor

Net Power	17.6 kW
Motormodel	C1.7
Bore	84 mm
Net Power @ 2,200 rpm - U.S. EPA Tier 4 Final/EU Stage V - ISO 9249/EEC 80/1269	17.6 kW
Displacement	1.7 l
Note	Net power is tested per ISO 9249 and 80/1269/EEC.
Gross Power - 2,400 rpm - SAE J1995	18.4 kW
Emissions	Meets U.S. EPA Tier 4 Final and EU Stage V emission standards.
Note (2)	Net power advertised is the power available at the flywheel when the engine is at rated speed and rated power when the engine is installed with the factory configured fan, air intake system, exhaust system, and alternator with a minimum alternator load.
Stroke	100 mm

Weights

Operating Weight	4190 kg
Minimum Operating Weight with Canopy*	3480 kg
EU: CE Plate Weight with Cab***	3630 kg
Note (3)	***CE Plate Weight is based on the most common EU configuration. Includes 75 kg (165 lb) operator and full fuel tank and excludes bucket.
Maximum Operating Weight with Cab**	4190 kg
Maximum Operating Weight with Canopy**	4050 kg
EU: CE Plate Weight with Canopy***	3530 kg
Minimum Operating Weight with Cab*	3620 kg
Note (1)	* Minimum Weight is based on fixed rubber tracks, operator, full fuel tank, standard stick, blade, bucket and no extra counterweight.
Note (2)	**Maximum Weight is based on steel tracks, operator, full fuel tank, long stick, blade, bucket and extra counterweight.

Dimensions - Long Stick

Dig Depth	3110 mm
Track Belt/Shoe Width	300 mm
Maximum Reach	5510 mm
O/A Track Width	1780 mm
Maximum Blade Depth	535 mm
Tail Swing without Counterweight	890 mm
Stick Length	1560 mm
Swing Bearing - Height	565 mm
Boom Swing - Left	25.2 °
Overall Shipping Length*	4850 mm
Maximum Reach - Ground Level	5380 mm
Maximum Dump Clearance	3600 mm
Tail Swing with Counterweight	960 mm
O/A Shipping Height	2480 mm
Note	*Overall Shipping Length depends on blade position during shipment.
Boom In Reach	1860 mm
Maximum Dig Height	5020 mm
Vertical Wall	2390 mm
Boom Height - Shipping Position	1750 mm
Maximum Blade Height	385 mm
O/A Undercarriage Length	2220 mm
Boom Swing - Right	870 mm
Ground Clearance	310 mm

Blade

Height	350 mm
Width	1780 mm

Dimensions - Standard Stick

Boom Swing - Right	870 mm
Tail Swing with Counterweight	960 mm
Stick Length	1260 mm
Maximum Reach - Ground Level	5130 mm
Boom Swing - Left	640 mm
Maximum Reach	5270 mm
Track Belt/Shoe Width	300 mm
Maximum Dump Clearance	3490 mm
Swing Bearing - Height	565 mm
Boom Height - Shipping Position	1520 mm
O/A Shipping Height	2480 mm
Overall Shipping Length*	4800 mm
Boom In Reach	1760 mm
Note	*Overall Shipping Length depends on blade position during shipment.
Tail Swing with Extra Counterweight	1005 mm
Maximum Dig Height	4920 mm
Vertical Wall	2250 mm
Dig Depth	2810 mm
O/A Undercarriage Length	2220 mm
Tail Swing without Counterweight	890 mm
Maximum Blade Depth	535 mm
Maximum Blade Height	385 mm
Ground Clearance	310 mm

Weight Increase from Minimum Configuration

Cab	140 kg
Counterweight	100 kg
Steel Tracks	130 kg
Long Stick	20 kg
Angle Blade	160 kg
Extra Counterweight	250 kg

Påfyllingskapasitet

Drivstofftank	45 l
Hydraulic Tank	20 l
Cooling System	7 l
Engine Oil	6 l
Hydraulic System	45 l

Travel System

Ground Pressure - Minimum Weight	29.6 kPa
Maximum Traction Force - High Speed	16.9 kN
Maximum Traction Force - Low Speed	31 kN
Travel Speed - High	4.5 km/h
Gradeability - Maximum	30 degrees
Travel Speed - Low	2.6 km/h
Ground Pressure - Maximum Weight	35.7 kPa

Hydraulic System

Pump Flow at 2,400 rpm	100 l/min
Auxiliary Circuit - Primary - Flow	70 l/min
Operating Pressure - Swing	181 bar
Type	Load Sensing Hydraulics with Variable Displacement Piston Pump
Auxiliary Circuit - Secondary - Pressure	245 bar
Digging Force - Stick - Long	16.9 kN
Auxiliary Circuit - Secondary - Flow	25 l/min
Digging Force - Bucket	33 kN
Operating Pressure - Travel	245 bar
Operating Pressure - Equipment	245 bar
Auxiliary Circuit - Primary - Pressure	245 bar
Digging Force - Stick - Standard	18.9 kN
Note	*Flow and pressure are not combinable. Under load, as flow rises pressure goes down.

Sound

Note	European Union Directive ‚ "2000/14/EC"
Operator Sound Pressure (ISO 6396:2008)	78 dB(A)
Average Exterior Sound Pressure (ISO 6395:2008)	94 dB(A)

Swing System

Machine Swing Speed	9 r/min
Boom Swing - Right	50 °
Boom Swing - Left	75 °

Dimensions (Approximate) - Standard Stick

Tail Swing with Extra Counterweight

1005 mm

Certification - Cab and Canopy

Roll Over Protective Structure (ROPS)	ISO 12117-2:2008
Tip Over Protective Structure (TOPS)	ISO 12117:1997
Top Guard	ISO 10262:1998 (Level I)

Dimensions (Approximate) - Long Stick

Tail Swing with Extra Counterweight

1005 mm

Sustainability

Recyclability

95%

Egenskaper

ALL DAY COMFORT

Choose either a canopy or a sealed and pressurized cab which can be equipped with air conditioning, adjustable wrist rests, and a suspension seat option to help keep you working comfortably all day long.

EASY TO OPERATE

Controls are easy to use and the intuitive Next Generation LCD monitor provides easy to read machine information. An advanced touchscreen monitor can also be equipped.

STICK STEER TRAVEL MODE

Moving around the job site is even easier with the Cat Stick Steer option. Easily switch from traditional travel controls with levers and pedals to joystick controls to move the machine and to operate the blade. The benefit of less effort and improved control is in your hands!

BIG PERFORMANCE IN A COMPACT DESIGN

Strong lift and dig performance helps you get the job done faster. The compact radius design lets you access and work in the tightest areas. Dozer float allows for easy clean up.

SAFETY ON THE JOB SITE

Your safety is our top priority. The Cat mini excavator is designed to help keep you safe on the job. Courtesy work lights and a fluorescent retractable seat belt are just a couple of the safety features we’ve built into the machine.

SIMPLE SERVICE FOR LESS DOWNTIME

Maintenance is quick and easy on the Cat mini excavator. Routine check points are easy to access at ground level through the side doors. The unique tilt up cab or canopy lets you reach additional service areas when needed.

LOWER OPERATING COSTS

Equipped with features such as auto idle, auto engine shutdown, and efficient hydraulics with a variable displacement pump, the Cat mini excavator was designed with reducing your operating costs in mind.

SUSTAINABILITY

The Cat® C1.7 engine meets U.S. EPA Tier 4 Final, EU Stage V, and Japan 2014 emission standards.
Cat diesel engines are required to use ULSD (ultra-low sulfur diesel fuel with 15 ppm of sulfur or less) or ULSD blended with the following lower-carbon intensity fuels up to: 20% biodiesel FAME (fatty acid methyl ester) * or 100% renewable diesel, HVO (hydrotreated vegetable oil) and GTL (gas-to-liquid) fuels. Refer to guidelines for successful application. Please consult your Cat dealer or “Caterpillar Machine Fluids Recommendations” (SEBU6250) for details.
Auto Idle helps reduce unnecessary fuel burn and greenhouse gas emissions by allowing the engine to automatically go into idle mode when the machine is not working.
Engine Idle Shutdown Timer reduces fuel burn, greenhouse gas emissions and unnecessary idle time by shutting down the machine after a pre-set idling period.
Cruise control helps you maintain a constant speed as you travel across your jobsite saving fuel and reducing greenhouse gas emissions.
The Cat® Seat Belt Reminder provides audible and visual warnings to remind operators to buckle up during machine operation. The easy-to-install system is compatible with all equipment brands to help ensure operator safety.
Extended maintenance intervals not only reduce downtime but decrease the amount of fluid and filters that are replaced over the life of the machine.
Remote Flash minimizes downtime and maintenance time while keeping your asset running with maximum efficiency. Alerts for machine updates are sent virtually from your Cat dealer and updates can be deployed without a dealer technician needing to be onsite.(if equipped)
Remote Troubleshoot decreases maintenance time and keeps your machine running with maximum efficiency by allowing your Cat dealer to virtually test the machine while working. Once a problem is identified, a technician can fix it the first time, saving time and money.(if equipped)
Cat Grade with advanced 2D and 3D technologies combine advanced guidance with optional automated machine control helping you reach grading targets while reducing fuel burn and greenhouse gas emissions by improving efficiency, job site productivity, and accuracy. (if equipped).

*Engines with no aftertreatment devices can use higher blends, up to 100% biodiesel. (for use of blends higher than 20% biodiesel, consult your Cat dealer)

Se produktet i 360°

Drag your mouse to rotate the product

Se:

LEs også

Cat 302.7 og 303.5 i ny drakt!

Cat 302.7 g 303.5 har gjennomgått en oppgradering og er nå fullt utrustet med den siste teknologien og komforten fra Cat. Les mer om maskinene her!

Kontakt

Ta kontakt hvis du har spørsmål.

OSLO

Bølerveien 60
N-2020 Skedsmokorset

Pon Equipment: +47 21 08 41 00
Pon Rental: +47 21 08 43 00
E-post: [email protected]

Kontakt Tilbake