Cat 305 CR

Minigravere 0.9-10 tonn

Maskinvekt: 5 700 kg
Skuffestørrelse: 250 l
Bruttoeffekt: 36 kW/ 48 hk

Standard konfigurasjon er med Cat HK, TRS6 rototilt, puss- og graveskuff.

Se brosjyre Send Forespørsel

Kan leies via Pon Rental

På lager

Om Cat 305 CR

Cat® 305 CR minigraver leverer kraft og ytelse i en kompakt størrelse for å hjelpe deg med å jobbe i en lang rekke bruksområder.

Spesifikasjoner

Motor

Net Power	33.6 kW
Motormodel	C1.7 Turbo
Displacement	1.662 l
Gross Power - 2,400 rpm - SAE J1995:2014	36.1 kW
Stroke	100 mm
Bore	84 mm
Net Power - 2,400 rpm - ISO 9249, 80/1269/EEC	33.6 kW
Note	Advertised power is tested per the specified standard in effect at the time of manufacture.
Emissions	Meets U.S. EPA Tier 4 Final and EU Stage V emissions standards.

Weights

Operating Weight	5754 kg
Note (2)	**Maximum Weight is based on steel tracks with pads, operator, full fuel tank, long stick, straight blade, extra counterweight and no bucket.
Minimum Operating Weight with Cab*	5105 kg
Note (1)	*Minimum Weight is based on rubber tracks, operator, full fuel tank, standard stick, straight blade, no bucket and no extra counterweight.
Minimum Operating Weight with Canopy*	5006 kg
Maximum Operating Weight with Canopy**	5665 kg
Maximum Operating Weight with Cab**	5764 kg

Dimensions - Long Stick

Dig Depth	3670 mm
Maximum Reach	5990 mm
O/A Shipping Height	2550 mm
Vertical Wall	2560 mm
Track Width	1980 mm
Overall Shipping Length*	5340 mm
Maximum Dump Clearance	3845 mm
Tail Swing with Counterweight	1200 mm
Boom Swing - Right	865 mm
Boom Swing - Left	24.2 °
Tail Swing without Counterweight	1095 mm
Track Belt/Shoe Width	400 mm
Maximum Reach - Ground Level	5835 mm
Stick Length	1601 mm
Swing Bearing - Height	619 mm
O/A Undercarriage Length	2580 mm
Boom In Reach	2580 mm
Maximum Blade Depth	650 mm
Maximum Blade Height	400 mm
Maximum Dig Height	5355 mm
Boom Height - Shipping Position	1895 mm
Note	*Overall Shipping Length depends on blade position during shipment.
Ground Clearance	335 mm

Påfyllingskapasitet

Hydraulic Tank	60 l
Engine Oil	6 l
Hydraulic System	75 l
Drivstofftank	68 l
Cooling System	11 l

Swing System

Boom Swing - Left	72 Degrees
Machine Swing Speed	9 r/min
Boom Swing - Right	50 Degrees

Hydraulic System

Digging Force - Bucket	49.2 kN
Auxiliary Circuit - Secondary - Pressure	265 bar
Operating Pressure - Equipment	265 bar
Auxiliary Circuit - Secondary - Flow	28 l/min
Operating Pressure - Travel	265 bar
Type	Load Sensing Hydraulics with Variable Displacement Piston Pump
Digging Force - Stick - Standard	28.3 kN
Auxiliary Circuit - Primary - Pressure	265 bar
Note	Flow and pressure are not combinable. Under load, as flow rises pressure goes down.
Pump Flow at 2,400 rpm	133 l/min
Auxiliary Circuit - Primary - Flow	80 l/min
Operating Pressure - Swing	200 bar
Digging Force - Stick - Long	25.2 kN

Dimensions - Standard Stick

Tail Swing without Counterweight	1095 mm
Boom Swing - Left	615 mm
Boom Swing - Right	865 mm
Maximum Dig Height	5215 mm
Vertical Wall	2335 mm
Maximum Blade Height	400 mm
Swing Bearing - Height	619 mm
Boom Height - Shipping Position	1820 mm
Overall Shipping Length*	5305 mm
O/A Shipping Height	2550 mm
Dig Depth	3420 mm
Maximum Reach - Ground Level	5590 mm
Maximum Dump Clearance	3700 mm
Maximum Reach	5755 mm
Boom In Reach	2570 mm
Maximum Blade Depth	650 mm
Note	*Overall Shipping Length depends on blade position during shipment.
O/A Undercarriage Length	2580 mm
Track Belt/Shoe Width	400 mm
Stick Length	1351 mm
Tail Swing with Counterweight	1200 mm
Ground Clearance	335 mm

Travel System

Maximum Traction Force - High Speed	24.7 kN
Travel Speed - High	5 km/h
Travel Speed - Low	2.8 km/h
Ground Pressure - Maximum Weight	32.2 kPa
Gradeability - Maximum	30 degrees
Ground Pressure - Minimum Weight	27.3 kPa
Maximum Traction Force - Low Speed	50.5 kN

Weight Increase from Minimum Configuration

Counterweight	242 kg
Angle Blade	92 kg
Long Stick	34 kg
Steel Tracks with Pads	375 kg

Blade

Angle Blade - Right	25 degrees
Angle Blade Width	1980 mm
Angle Blade Height	400 mm
Straight Blade Width	1980 mm
Straight Blade Height	390 mm
Angle Blade - Left	25 degrees

Certification - Cab and Canopy

Roll Over Protective Structure (ROPS)	ISO 12117-2:2008
Top Guard	ISO 10262:1998 Level I

Sound

Operator Sound Pressure (ISO 6396:2008)	76 dB(A)
Average Exterior Sound Pressure (ISO 6395:2008)	97 dB(A)
Note	European Union Directive "2000/14/EC"

Sustainability

Recyclability

96%

Egenskaper

ALL DAY COMFORT

Choose either a canopy (not available in some regions) or a sealed and pressurized cab which can be equipped with air conditioning, adjustable wrist rests, and a suspension seat to help keep you working comfortably all day long.

EASY TO OPERATE

Controls are easy to use and the intuitive Next Generation LCD monitor provides easy to read machine information. An advanced touchscreen monitor can also be equipped as an upgrade option.

STICK STEER TRAVEL MODE

Moving around the job site is even easier with the Cat Stick Steer option. Easily switch from traditional travel controls with levers and pedals to joystick controls to move the machine and to operate the blade. The benefit of less effort and improved control is in your hands!

BIG PERFORMANCE IN A COMPACT DESIGN

Strong lift and dig performance helps you get the job done faster. The compact radius design lets you access and work in the tightest areas. Dozer float allows for easy clean up. An angle blade is also an option for finished grading and easier backfilling applications.

SAFETY ON THE JOB SITE

Your safety is our top priority. The Cat mini excavator is designed to help keep you safe on the job. Courtesy work lights and a fluorescent retractable seat belt with optional seat belt reminder system are just a couple of the safety features we’ve built into the machine.

SIMPLE SERVICE FOR LESS DOWNTIME

Maintenance is quick and easy on the Cat mini excavator. Routine check points are easy to access at ground level through the side doors.

LOWER OPERATING COSTS

Equipped with features such as auto idle, auto engine shutdown, and efficient hydraulics with a variable displacement pump, the Cat mini excavator was designed with reducing your operating costs in mind.

SUSTAINABILITY

The Cat® C1.7 engine meets U.S. EPA Tier 4 Final, EU Stage V, and Japan 2014 emission standards.
Cat diesel engines are required to use ULSD (ultra-low sulfur diesel fuel with 15 ppm of sulfur or less) or ULSD blended with the following lower-carbon intensity fuels up to: 20% biodiesel FAME (fatty acid methyl ester) * or 100% renewable diesel, HVO (hydrotreated vegetable oil) and GTL (gas-to-liquid) fuels. Refer to guidelines for successful application. Please consult your Cat dealer or “Caterpillar Machine Fluids Recommendations” (SEBU6250) for details.
Auto Idle helps reduce unnecessary fuel burn and greenhouse gas emissions by allowing the engine to automatically go into idle mode when the machine is not working.
Engine Idle Shutdown Timer reduces fuel burn, greenhouse gas emissions and unnecessary idle time by shutting down the machine after a pre-set idling period.
Cruise control helps you maintain a constant speed as you travel across your jobsite saving fuel and reducing greenhouse gas emissions.
The Cat® Seat Belt Reminder provides audible and visual warnings to remind operators to buckle up during machine operation. The easy-to-install system is compatible with all equipment brands to help ensure operator safety.
Extended maintenance intervals not only reduce downtime but decrease the amount of fluid and filters that are replaced over the life of the machine.
Remote Flash minimizes downtime and maintenance time while keeping your asset running with maximum efficiency. Alerts for machine updates are sent virtually from your Cat dealer and updates can be deployed without a dealer technician needing to be onsite.(if equipped)
Remote Troubleshoot decreases maintenance time and keeps your machine running with maximum efficiency by allowing your Cat dealer to virtually test the machine while working. Once a problem is identified, a technician can fix it the first time, saving time and money.(if equipped)
Cat Grade with advanced 2D and 3D technologies combine advanced guidance with optional automated machine control helping you reach grading targets while reducing fuel burn and greenhouse gas emissions by improving efficiency, job site productivity, and accuracy. (if equipped).

*Engines with no aftertreatment devices can use higher blends, up to 100% biodiesel. (for use of blends higher than 20% biodiesel, consult your Cat dealer)