Cat 307.5

Minigravere 0.9-10 tonn

Maskinvekt: 8233 kg
Skuffestørrelse: 350/ 400 L
Bruttoeffekt: 43.2 kW/ 57.9 hp

Se brosjyre Send Forespørsel

Kan leies via Pon Rental

Om Cat 307.5

The Cat® 307.5 Mini Excavator delivers maximum power and performance in a mini size to help you work in a wide range of applications.

CAT® 307.5

Råsterk på beltene
Kjapp på hydraulikken
Utmerket førerkomfort
Spakstyring og Cruise Control
LCD- skjerm med bluetooth
Servicevennlig

Maskinen er råsterk på beltene, som gjør at den enkelt klatrer opp i kassa på lastebilen eller hengeren. I tillegg gir den sterke hydraulikken effektive og sterke gravekrefter som gjør det mulig å grave selv i ekstra harde underlag. Maskinen har også et godt førermiljø med god lydisolering, LCD skjerm med bluetooth, romslig og oversiktlig hytte, og godt klima med aircondition for varme og kalde dager.

I tillegg til dette, har maskinen et solid blad som gjør den ypperlig for arbeid som planering og dosing, særlig kombinert med spakstyringen. Spakstyringen (eller Sticksteeren) gjør at maskinen er meget manøvreringsdyktig.

Maskinen er også bygget for rask, trygg og enkel vedlikehold og det er lett å komme til for å fylle på kjølevæske og olje, eller utføre annen service. Alle disse funksjonene gjør graveren til en perfekt arbeidskamerat.

Maskinen har 55,9 hk og veier 8 233 kg.

NORSKE MASKINTILPASNINGER

Lang stikke standard
Fastbom
Standard med AC
Flyt på skjær

Spesifikasjoner

Cat C2.4 Turbo Motor Steg V
Nettoeffekt 55,9 hk
Vekt 8200 kg
Gravedybde 4107 mm
Skuffestørrelse 350/400 l
Bredde 2320 cm
Belteplater, bredde 450 mm (gummibelter standard)

Spesifikasjoner

Motor

Net Power	40.9 kW
Displacement	2.43 l
Gross Power - SAE J1995	43.2 kW
Bore	87 mm
Stroke	102.4 mm
Rated Net Power - 2,400 rpm - U.S. EPA Tier 4 Final/EU Stage V - ISO 9249/EEC 80/1269	40.9 kW
Motormodel	Cat C2.4 Turbo

Weights

Operating Weight	8120 kg
Note (2)	**Maximum Weight is based on steel tracks with rubber pads, counterweight, operator, full fuel tank, long stick, blade and no bucket.
Maximum Operating Weight with Cab**	8120 kg
Minimum Operating Weight with Cab*	7505 kg
Note (1)	*Minimum Weight is based on steel tracks, no counterweight, operator, full fuel tank, standard stick, blade and no bucket.

Dimensions - Long Stick

Dig Depth	4642 mm
Cab Height	2541 mm
Maximum Blade Height	370 mm
Track Belt/Shoe Width	450 mm
Maximum Dump Clearance	5717 mm
O/A Undercarriage Length	2760 mm
O/A Track Width	2200 mm
Vertical Wall	4113 mm
Width over Upper House	2250 mm
Boom In Reach	2250 mm
Stick Length	2208 mm
Tail Swing with Counterweight	1930 mm
Maximum Reach	6805 mm
Ground Clearance	370 mm
Swing Bearing - Height	756 mm
Tail Swing without Counterweight	1800 mm
Maximum Dig Height	7765 mm
Maximum Blade Depth	407 mm
Maximum Reach - Ground Level	6670 mm
Height - Boom Transport - No Tools	2550 mm
Overall Shipping Length - without Counterweight	6120 mm
Overall Shipping Length - with Counterweight	6250 mm
Note (1)	Boom Height when stick is pinned in transport position with no attachments.
Height - Boom Working - With Tools	3150 mm
Note (2)	Boom Height when stick is pinned in working position with attachments.

Weight Increase from Minimum Configuration

Long Stick	82 kg
Counterweight	250 kg
Steel Tracks with Pads	285 kg

Travel System

Maximum Traction Force - Low Speed	62.4 kN
Maximum Traction Force - High Speed	26.1 kN
Travel Speed - High	5 km/h
Ground Pressure - Maximum Weight	37.7 kPa
Travel Speed - Low	3.1 km/h
Gradeability - Maximum	30 degrees
Ground Pressure - Minimum Weight	34.8 kPa

Påfyllingskapasitet

Cooling System	10 l
Hydraulic System	110 l
Hydraulic Tank	53 l
Drivstofftank	145 l
Engine Oil	9.5 l

Hydraulic System

Type	Load Sensing Hydraulics with Variable Displacement Piston Pump
Operating Pressure - Swing	250 bar
Note	Flow and pressure are not combinable. Under load, as flow rises pressure goes down.
Pump Flow at 2,400 rpm	167 l/min
Digging Force - Stick - Standard	37.8 kN
Operating Pressure - Travel	285 bar
Operating Pressure - Equipment	285 bar
Digging Force - Stick - Long	33.7 kN
Digging Force - Bucket	54.6 kN
Maximum Auxiliary Circuit - Secondary - Flow at Pump	33 l/min
Maximum Auxiliary Circuit - Secondary - Pressure at Pump	285 bar
Maximum Auxiliary Circuit - Primary - Flow at Pump	131 l/min
Maximum Auxiliary Circuit - Primary - Pressure at Pump	285 bar

Swing System

Machine Swing Speed

10 r/min

Blade

Height	431 mm
Width	2280 mm

Certification - Cab

Roll Over Protective Structure (ROPS)	ISO 12117-2:2008
Top Guard	ISO 10262:1998 (Level I)
Tip Over Protective Structure (TOPS)	ISO 12117:1997

Sound

Operator Sound Pressure (ISO 6396:2008)	72 dB(A)
Average Exterior Sound Pressure (ISO 6395:2008)	98 dB(A)
Note	European Union Directive “2000/14/EC”

Air Conditioning System

Air Conditioning

The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains .90 kg of refrigerant which has a CO2 equivalent of 1.287 metric tonnes.

Dimensions - Standard Stick

Tail Swing with Counterweight	1930 mm
Vertical Wall	3597 mm
Tail Swing without Counterweight	1800 mm
Stick Length	1665 mm
Boom In Reach	1681 mm
Track Belt/Shoe Width	450 mm
Ground Clearance	370 mm
O/A Track Width	2200 mm
Maximum Reach - Ground Level	6151 mm
O/A Undercarriage Length	2760 mm
Width over Upper House	2250 mm
Maximum Reach	6297 mm
Swing Bearing - Height	756 mm
Maximum Blade Height	370 mm
Maximum Blade Depth	407 mm
Dig Depth	4100 mm
Maximum Dump Clearance	5300 mm
Cab Height	2541 mm
Maximum Dig Height	7348 mm
Height - Boom Working - With Tools	2730 mm
Overall Shipping Length - with Counterweight	6230 mm
Note (2)	Boom Height when stick is pinned in working position with attachments. Standard Stick offers only one pin position.
Overall Shipping Length - without Counterweight	6100 mm
Height - Boom Transport - No Tools	2570 mm
Note (1)	Boom Height when stick is pinned in transport position with no attachments.

Sustainability

Recyclability

96%

Egenskaper

ALL DAY COMFORT

A sealed and pressurized cab is equipped with an improved air conditioning system, adjustable wrist rests and a suspension seat to help keep you working comfortably all day long.

EASY TO OPERATE

Controls are easy to use and the intuitive Next Generation Monitor provides customizable machine operator preferences and easy to read machine information.

STICK STEER TRAVEL MODE

Moving around the job site is even easier with Cat Stick Steer. Easily switch from traditional travel controls with levers and pedals to joystick controls with a push of a button. The benefit of less effort and improved control is in your hands!

BIG PERFORMANCE IN A MINI DESIGN

Increased lifting, swinging, travel and multi-functioning performance helps you get the job done more efficiently, and blade float allows for easy grading.

SAFETY ON THE JOB SITE

Your safety is our top priority. The Cat Mini Excavator is designed to help keep you safe on the job. A back-up camera, courtesy work lights and a fluorescent retractable seat belt are just a few of the safety features we’ve built into the machine.

SIMPLE SERVICE FOR LESS DOWNTIME

Maintenance is quick and easy on the Cat Mini Excavator. Routine check points are easy to access at ground level with grouped service points and robust service panels.

LOWER OPERATING COSTS

Equipped with features such as auto idle, auto engine shutdown, and efficient hydraulics with a variable displacement pump, the Cat Mini Excavator was designed with reducing your operating costs in mind.

UNMATCHED DEALER SUPPORT

Your Cat dealer is here to help you reach your business goals. From providing equipment solutions to operator training to service needs and beyond, your Cat dealer is ready to help.

SUSTAINABILITY

The Cat® C2.4 engine meets U.S. EPA Tier 4 Final, EU Stage V, and Japan 2014 emission standards.
Cat diesel engines are required to use ULSD (ultra-low sulfur diesel fuel with 15 ppm of sulfur or less) or ULSD blended with the following lower-carbon intensity fuels up to: 20% biodiesel FAME (fatty acid methyl ester) * or 100% renewable diesel, HVO (hydrotreated vegetable oil) and GTL (gas-to-liquid) fuels. Refer to guidelines for successful application. Please consult your Cat dealer or “Caterpillar Machine Fluids Recommendations” (SEBU6250) for details.
Auto Idle helps reduce unnecessary fuel burn and greenhouse gas emissions by allowing the engine to automatically go into idle mode when the machine is not working.
Engine Idle Shutdown Timer reduces fuel burn, greenhouse gas emissions and unnecessary idle time by shutting down the machine after a pre-set idling period.
Cruise control helps you maintain a constant speed as you travel across your jobsite saving fuel and reducing greenhouse gas emissions.
The Cat® Seat Belt Reminder provides audible and visual warnings to remind operators to buckle up during machine operation. The easy-to-install system is compatible with all equipment brands to help ensure operator safety.
Extended maintenance intervals not only reduce downtime but decrease the amount of fluid and filters that are replaced over the life of the machine.
Remote Flash minimizes downtime and maintenance time while keeping your asset running with maximum efficiency. Alerts for machine updates are sent virtually from your Cat dealer and updates can be deployed without a dealer technician needing to be onsite.(if equipped)
Remote Troubleshoot decreases maintenance time and keeps your machine running with maximum efficiency by allowing your Cat dealer to virtually test the machine while working. Once a problem is identified, a technician can fix it the first time, saving time and money.(if equipped)
Cat Grade with advanced 2D and 3D technologies combine advanced guidance with optional automated machine control helping you reach grading targets while reducing fuel burn and greenhouse gas emissions by improving efficiency, job site productivity, and accuracy. (if equipped).

*Engines with no aftertreatment devices can use higher blends, up to 100% biodiesel. (for use of blends higher than 20% biodiesel, consult your Cat dealer)

Kontakt

Ta kontakt hvis du har spørsmål.

OSLO

Bølerveien 60
N-2020 Skedsmokorset

Pon Equipment: +47 21 08 41 00
Pon Rental: +47 21 08 43 00
E-post: [email protected]

Kontakt Tilbake