Cat 340-08

Gravere 37-95 tonn

Maskinvekt: 44,9 tonn
Skuffestr.: 2 200 l
Nettoeffekt: 232 kW / 347 hk

Om Cat 340-08

 

Cat 340 er bygd for å dekke dine spesielle behov som å grave, flytte stein eller finjustering i skråninger og grøfter. Med den innebygde teknologien Cat Grade 2D, Cat Grade Assist, Cat E-fence og Cat Payload kan du øke produktiviteten betraktelig sammenlignet med tradisjonelle gravere. Vektsystemet “Cat Payload” hjelper deg med å forhindre over- og underlast. Cat 340 er suveren til lasting av knuser og biler takket være sin gode stabilitet og krefter.

  • Innebygd Cat teknologi som øker førerens effektivitet betydelig og forenkler bruken av maskinen
  • Drivstoff-effektiv med nyeste motorteknologien som tilfredstiller utslippskrav steg V for anleggsmaskiner og økt hydraulisk kapasitet
  • Flere effektmodus og smartmodus
  • Premium førermiljø
  • Elektriske spaker
  • Forbedret sikkerhet og sikt
  • Enklere vedlikehold og økt serviceintervall
  • Hydrauliske vifter og effektiv eksosrensing med lavt AdBlue-forbruk.
  • Kan leveres med rett bom, LRE eller UHD (Se Cat rivningsmaskiner her)

Spesifikasjoner

Motor
Engine Power - ISO 9249 258 kW
Motormodel Cat C9.3B
Bore 115 mm
Stroke 149 mm
Displacement 9.3 l
Hydraulic System
Main System - Maximum Flow 560 l/min
Maximum Pressure - Equipment 35000 kPa
Maximum Pressure - Equipment - Lift Mode 38000 kPa
Maximum Pressure - Travel 35000 kPa
Maximum Pressure - Swing 29400 kPa
Swing Mechanism
Swing Speed 8.84 r/min
Maximum Swing Torque 143 kN·m
Weights
Operating Weight 37500 kg
Påfyllingskapasitet
Fuel Tank Capacity 600 l
Cooling System 40 l
Engine Oil 32 l
Swing Drive - Each 18 l
Final Drive - Each 8 l
Hydraulic System - Including Tank 373 l
Hydraulic Tank 161 l
DEF Tank 80 l
Dimensjoner
Boom Reach 6.5 m (21'4")
Stick Reach 3.9 m (12'10")
Bucket HD 2.36 m³ (3.08 yd³)
Shipping Height - Top of Cab 3180 mm
Handrail Height 3180 mm
Shipping Length 11180 mm
Tail Swing Radius 3530 mm
Counterweight Clearance 1260 mm
Ground Clearance 510 mm
Track Length 5030 mm
Track Length to Center of Rollers 4040 mm
Track Gauge 2740 mm
Transport Width - 850 mm (33”) Shoes 3590 mm
Working Ranges & Forces
Maximum Digging Depth 8210 mm
Boom Reach 6.5 m (21'4")
Stick Reach 3.9 m (12'10")
Bucket HD 2.36 m³ (3.08 yd³)
Maximum Reach at Ground Level 11760 mm
Maximum Cutting Height 10740 mm
Maximum Loading Height 7470 mm
Minimum Loading Height 1890 mm
Maximum Depth Cut for 2440 mm (8 ft) Level Bottom 8080 mm
Maximum Vertical Wall Digging Depth 6420 mm
Bucket Digging Force - ISO 210 kN
Stick Digging Force - ISO 145 kN

Egenskaper

High Performance

  • The C9.3B engine generates more power than the 2020 model year 336 engine.
  • More power to the pumps, wider undercarriage, and heavy counterweight enable up to 10 percent more productivity.
  • Match the excavator to the job with three power modes – Power, Smart, and Eco. Power mode is maximum power all the time. Smart mode automatically matches engine and hydraulic power to digging conditions, providing maximum power when needed and reducing power when it isn’t to help save fuel. Eco mode reduces engine speed and keeps it constant to reduce fuel consumption.

Boost Efficiency and Productivity

  • Boost productivity up to 45 percent with optional Cat Grade technology.
  • 2D Grade indicates depth and slope on the monitor with auditory alerts.
  • Grade Assist helps you stay on grade – simply and effortlessly – with single-lever digging.
  • Automatically stop excavator swing at operator-defined set points in truck loading and trenching applications with optional Swing Assist, which will help you use less effort and consume less fuel.
  • Cat Payload on-board weighing helps you achieve precise load targets to improve your operating efficiency. Pick up a load of material with either a bucket or grapple – and get a real time weight estimate without even swinging.
  • Combine Payload with VisionLink® and remotely manage your production targets. The monitor’s USB port lets you download results from one shift all the way up to 30 days of work so you can manage your progress without needing an internet connection or VisionLink subscription.
  • Upgrade to Cat Grade with Advanced 2D and create and edit grade designs with ease on a second high-resolution 254 mm (10 in) touchscreen monitor.
  • Upgrade to Cat Grade with 3D and create and edit designs with ease and see the front linkage’s full range of motion on a second high-resolution 254 mm (10 in) touchscreen monitor.
  • Know the excavator’s exact position relative to GPS and GLONASS systems. The machine automatically compensates for excavator pitch and roll caused by sloping ground conditions.
  • All Cat Grade systems are compatible with radios and base stations from Trimble, Topcon, and Leica.
  • Already invested in a grade infrastructure? You can install grade systems from Trimble, Topcon, and Leica onto the machine.
  • Remote troubleshoot connects you to a dealer service pro to help solve your problem and quickly get you to work.
  • Remote flash works around your schedule to ensure your machine’s software is up to date for optimal performance.
  • Standard Product Link™ provides location, machine hours, fuel usage, productivity, idle time, diagnostic codes, and other machine data on demand through VisionLink online interface, helping you improve jobsite efficiency with lower operating costs.

Built for Rugged Conditions

  • Reinforced structures ensure long-term durability in harsh environments.
  • Work up to 4500 m (14,764 ft) above sea level.
  • Standard high-ambient temperature capability is 52° C (125° F) with cold start capability at –18° C (0° F).
  • An optional battery operated engine heater enables starting at –32° C (–25.6° F).
  • Auto hydraulic oil warmup gets you to work faster in cold temperatures and helps prolong the life of components.
  • Two levels of filtration protect the engine from low-quality diesel fuel.
  • Grease sealed between track pins and bushings reduces travel noise and prevents debris from entering to increase undercarriage life.

Work in Comfort

  • Choose between Deluxe and Premium cabs – both with automatic climate control.
  • Deluxe cab comes with heated seat to keep you warm.
  • Premium cab comes with heated and ventilated seat for year-round comfort.
  • Control the excavator comfortably with easy-to-reach controls all located in front of you.
  • Stow your gear with plenty of in-cab storage beneath and behind the seat, overhead, and in the consoles.
  • Use the standard radio’s USB ports and Bluetooth® technology to connect personal devices and make hands-free calls.

Simple to Operate

  • Start the engine with the push of a button; use a Bluetooth key fob or Operator ID passcode.
  • Program each joystick button, including power mode, response, and pattern, using Operator ID; the machine will remember what you set each time you go to work.
  • Trouble cutting through tough material? Auto dig boost gives you an automatic power increase of 8 percent when you need it for better bucket penetration, shorter cycle times, and greater payloads.
  • Need more lift during your shift? Auto heavy lift gives you 8 percent more power exactly when you need it for as long as you need it.
  • Make moving the excavator much easier with optional Cat Stick Steer. Simply push a button and use one hand to travel and turn instead of both hands or feet on levers or pedals.
  • Navigate quickly on the high-resolution touchscreen monitor.
  • Protect your hammer from overworking. Auto hammer stop warns you after 15 seconds of continuous firing and then automatically shuts it off after 30 seconds – all to prevent wear and tear on the attachment and excavator.
  • Not sure how a function works or how to maintain the excavator? Always have the operator’s manual at your fingertips in the touchscreen monitor.

Easy Maintenance

  • Expect less maintenance cost due to 1,000 hour engine oil intervals.
  • Change all fuel filters at a synchronized 1,000 hours. Filters are grouped and located on right-hand side of machine for easy maintenance.
  • Check hydraulic system oil and easily drain fuel system water and fuel tank water from ground level.
  • The air intake filter with pre-cleaner has high dust holding capacity.
  • The hydraulic oil filter provides superior filtration; anti-drain valves keep oil clean when the filter is replaced.
  • The high-efficiency hydraulic fan has an optional automatic reverse function to keep cores free from debris, eliminating the need for any operator interaction.
  • S∙O∙S SM ports are on ground level, simplifying maintenance and allowing for quick, easy extraction of fluid samples for analysis.

Enhanced Safety

  • The Rollover Protective Structure (ROPS) cab meets ISO12117-2:2008 requirements.
  • Enjoy great visibility with the help of narrow cab pillars, large windows, and a flat engine hood design.
  • Make service work easier and safer with optional inspection lighting. With the flip of a switch, lights will illuminate the engine,
    pump, battery, and radiator compartments to enhance visibility.
  • Optional Lift Assist helps you avoid tipping by letting you know if your load is within the excavator’s safe working range.
  • A travel direction indicator helps you know which way to activate travel levers.
  • Keep your excavator secure with Operator ID. Use your PIN code on the monitor to enable the push button starting feature.
  • A ground-level shutoff switch stops all fuel to the engine when activated and shuts down the machine.
  • Serrated steps and anti-skid punch plate on the service platform help prevent slipping.
  • A rearview camera is standard.

Se produktet i 360°

Drag your mouse to rotate the product

Kontakt

 

Ta kontakt hvis du har spørsmål.

 

  • Call
  • Arrow

 

OSLO

Bølerveien 60
N-2020 Skedsmokorset

Pon Equipment: +47 21 08 41 00
Pon Rental:         +47 21 08 43 00
E-post:                 [email protected]

Send meg et tilbud. 

250/250
Jeg ønsker å motta nyhetsbrev fra Pon.
Kontakt Tilbake Icon - Contact Sticky Cross
  • Call
  • Arrow

Ring oss

Send oss en e-post

Hvordan foretrekker du at vi kontakter deg? *
250/250

 

ELLER FYLL UT SKJEMA HER:

 

Fyll ut skjemaet nedenfor, så kontakter jeg deg så snart som mulig.

 

Hvordan vil du at vi skal kontakte deg? *
250/250
web-monitoring-ok