Cat 972M XE

Medium hjullastere

Nettoeffekt: 232 kW/ 315 hk
Vekt: 27,5 tonn
Standard skuff: 5,3 m3

Om Cat 972M XE

 

Cat 972M XE med produktoppdateringen fra 2017, bruker velprøvd teknologi systematisk og strategisk for å møte dine høye forventninger til pålitelighet, produktivitet, drivstoffeffektivitet og lang levetid. XE -teknologien forbedrer drivstoffeffektiviteten med opptil 25% over standardkonfigurasjonen i M -serien og opptil 35% i forhold til standardkonfigurasjonen i K -serien.

 

  • Suveren drivstoffeffektivitet med utslippsteknologien XE til hjullastere
  • Bygget for høy pålitelighet og den laveste kostnad per driftstime
  • Elektronisk styring av girkasse og intelligent spakstyring
  • Oversiktelig og ergonomisk førerhytte
  • Imøtekommer utslippskravene til Steg V for anleggsmaskiner
  • Mulighet for spesialtilpasset Pon hjullasterskuff fra vårt sveiseverksted
  • Cat teknologien Cat production Measurement (verktøy for produksjonsmåling og korrekt lasting) og Tire Monitoring System (elektronisk dekktrykksovervåkningssystem) som standard

 

 


Spesifikasjoner

Motor
Emissions Tier 4/Stage V
Motormodel Cat C9.3
Note The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.6 kg of refrigerant which has a CO2 equivalent of 2.288 metric tonnes.
Buckets
Bucket Capacities 3.20-9.94 m³ (4.19-13.00 yd³)
Hydraulic System
Implement Pump Type Variable Displacement Piston
Sound
Note (2) **For machines in European Union countries and in countries that adopt the EU Directives.
Note (1) *Distance of 15 m (49.2 ft), moving forward in second gear ratio.
With Cooling Fan Speed at Maximum Value - Exterior Sound Pressure Level (SAE J88:2013) 76 dB(A)*
With Cooling Fan Speed at 70% of Maximum Value - Exterior Sound Power Level (ISO 6395:2008)** 105 LWA***
Note (3) ***European Union Directive 2000/14/EC as amended by 2005/88/EC.
Transmission - Virtual Gears
Note Maximum travel speed in standard vehicle with empty bucket and standard L3 tires with 826 mm (32.5 in) roll radius.
Dimensions - Standard Lift
Rack Back - Maximum Lift 56 degrees
Rack Back - Carry Height 50 degrees
Rack Back at Ground 41 degrees
Note All dimensions are approximate and based on L3 XHA2 tires.
Operating Specifications
Note (1) For a machine configuration as defined under "Weight".
Note (2) Full compliance to ISO 143971:2007 Sections 1 thru 6, which requires 2% verification between calculations and testing.
Dimensions - High Lift
Rack Back - Maximum Lift 71 degrees
Rack Back - Carry Height 49 degrees
Rack Back at Ground 39 degrees
Note All dimensions are approximate and based on L3 XHA2 tires.
Weights
Note Weight based on a machine configuration with Michelin 26.5R25 XHA2 L3 radial tires, full fluids, operator, standard counterweight, cold start, roading fenders, Product Link™, manual diff lock/open axles (front/rear), power train guard, secondary steering,
Bucket Capacities
Bucket Capacities 3.20-9.94 m³ (4.19-13.00 yd³)
Engine - Tier 4 Final/Stage IV
Emissions Tier 4/Stage IV

Egenskaper

SUPERIOR FUEL EFFICIENCY

SUPERIOR FUEL EFFICIENCY
  • Deep system integration of the Cat continuously variable transmission, engine system, hydraulic system, transmission and cooling system results in significantly increased performance and fuel efficiency.
  • Lowering the rated engine speed and eliminating the torque converter results in speed that can be controlled independently of the engine speed.
  • Our high-power density and fuel efficient engines feature Cat electronics, a fuel injection process, and air-management systems.
Cat 972M XE Wheel Loader - SUPERIOR FUEL EFFICIENCY

ACHIEVE GREATER PRODUCTIVITY

ACHIEVE GREATER PRODUCTIVITY
  • Continuously variable transmission delivers smooth shifts, fast acceleration, and speed on grade.
  • Machine maneuvering on grade is made easy with steady deceleration and anti-rollback.
  • Integrated continuously variable transmission provides maximum, steady power at optimal speeds.
  • Easy-to-load performance series buckets improve material retention and reduce dig times, significantly improving productivity and fuel efficiency.
  • Differential locks are activated on the spot, improving traction for increased productivity.
  • Dual ride control accumulator system enables a wide payload range and better ride quality.
  • Aggregate packages with specialized offerings for loose aggregate rehandling applications.*

    * Optional configurations and equipment may vary from region to region and requires conformance to Caterpillar payload policy. Consult your dealer or Caterpillar representative for details.
Cat 972M XE Wheel Loader - ACHIEVE GREATER PRODUCTIVITY

PROVEN RELIABILITY

PROVEN RELIABILITY
  • Cat C9.3 engine offers increased power density with a combination of proven electronic fuel and air systems.
  • Equipped with automatic Cat regeneration system, Cat clean emissions module (CEM) with Diesel Particulate Filter (DPF), and Diesel Exhaust Fluid (DEF) tank and pump.
  • Features an electric fuel priming pump and a fuel/water separator.
  • Thorough component design and machine validation processes result in unmatched reliability and uptime.
Cat 972M XE Wheel Loader - PROVEN RELIABILITY

LONG TERM VALUE AND DURABILITY

LONG TERM VALUE AND DURABILITY
  • Advanced transmission and axles handle the most extreme applications.
  • The durable frame absorbs excavation and loading impact while the hitch system provides high-bearing force capacity.
  • Full-flow hydraulic filtration system with additional loop filtration improves hydraulic system strength and component life.
Cat 972M XE Wheel Loader - LONG TERM VALUE AND DURABILITY

TECHNOLOGY THAT GETS WORK DONE

TECHNOLOGY THAT GETS WORK DONE
  • Developed to monitor, manage, and enhance your job site operations.
  • PAYLOAD provides accurate weighing* of the materials you are loading and hauling. Payload data is displayed in real-time to improve productivity and reduce overloading.
  • DETECT enhances awareness of the environment around working equipment and provides alerts to help keep people and assets safe on the job site.
  • LINK wirelessly connects you to your equipment, giving you access to essential information you need to know to run your business. Gain valuable insight into how your machine or fleet is performing allowing you to make timely, fact-based decisions that can boost job site efficiency and productivity.
  • Optional Advanced Productivity subscription provides comprehensive actionable information to help you manage and improve the productivity and profitability of your operations.

    * Not legal for trade.
Cat 972M XE Wheel Loader - TECHNOLOGY THAT GETS WORK DONE

SAFELY HOME EVERY DAY

SAFELY HOME EVERY DAY
  • Cab access with wide door, optional remote door opening, and stair-like steps add solid stability.
  • Floor-to-ceiling windshield, large mirrors with integrated spot mirrors, and rear-vision camera provide industry leading all-around visibility.
  • Computerized monitoring system includes several warning indicators.
  • Rear vision camera enhances visibility behind the machine, helping you work safely and confidently.
  • Optional rear object detection radar system warns you of an object in critical zone while going in reverse, enhancing job site safety.
Cat 972M XE Wheel Loader - SAFELY HOME EVERY DAY

SAVE ON SERVICE AND MAINTENANCE

SAVE ON SERVICE AND MAINTENANCE
  • Extended service intervals including -
  1. Engine oil and engine oil filter change interval up to 1000 hours
  2. Hydraulic filter change interval up to 1000 hours
  3. Transmission oil change interval up to 4000 hours
  • One-piece tilting hood makes cab access fast and easy.
  • Electrical service centers enhance convenience and accessibility.
  • Access to fuel fill and daily maintenance points means less servicing time is required.
  • Optional integrated Cat autolube system provides full lube system monitoring and diagnostic test visibility.
  • Remote flash support.
  • Longer tire life with on-the-go traction aids.
Cat 972M XE Wheel Loader - SAVE ON SERVICE AND MAINTENANCE

DESIGNED FOR OPERATORS

DESIGNED FOR OPERATORS
  • The next generation easily adjustable seat with updated styling and a revolutionary suspension system. It comes in three trim levels and can be equipped with a 4-point harness.
  • Sound-suppression, seals, and damping cab mounts decrease noise and vibration for a quieter work environment.
  • The seat-mounted electro-hydraulic joystick steering system provides precision control and dramatically reduces arm fatigue, resulting in excellent comfort and accuracy.
  • Electrohydraulic (EH) controls, parking brake, and Single Axis Lever (SAL) lift and tilt function allow for better handling and control management.
  • Smart ergonomic controls are easy to use, intuitive, and user-friendly.
  • Touchscreen multi-function color display keeps operators focused.
  • The next generation of ride control works as a shock absorber, improving ride quality over rough terrain.
  • Inclined steps and convenient grab handles ease accessibility to the operating space.
  • Extended windows enhance visibility while convex and spot mirrors extend the driver’s view on the sides and rear.
Cat 972M XE Wheel Loader - DESIGNED FOR OPERATORS

PURPOSE BUILT SPECIALTY MODELS

PURPOSE BUILT SPECIALTY MODELS
INDUSTRIAL & WASTE
  • Engineered for work in Transfer Stations, Recycling Depots, Scrap Yards and Demolition Sites.
  • Factory installed guarding improves uptime; guards protect axle seals, steering cylinders, crankcase, front frame, powertrain, tilt cylinders, lower cab and rear box. Package includes reinforced service centers, heavy duty cable steps, lift cylinder baffles, narrow front fenders, and steel rear fender deflectors.
  • Factory installed options available are solid tires, rear machine guard, rubber mounted cab glass, engine precleaner, powered and filtered cab precleaner and variable pitch cooling fan.
  • Cat Waste Buckets available separately are Load & Carry, Tamp & Clamp, Dozing, and Grapple can be fitted with steel or rubber cutting edge.
STEEL MILL
  • Designed for the challenging work environment of steel mills and slag handling applications.
  • Purpose built package provides heat protection for hydraulic hoses and electrical harness and components.
  • Guarding protects tilt cylinder, working lights and the underside of the machine.
  • Reinforcement strengthens fenders, wheel wells, service centers and metallic roof.
  • A Rear Egress System provides emergency stair down the back of the machine.
  • Ground level redundant controls including transmission, engine, and parking brake controls provide an added level of safety.
  • The CAT Slag Bucket is available separately.
CORROSION RESISTANCE
  • Designed for corrosive environments such as fertilizer plants, chemical industries, agriculture, salt water ports and others.
  • Factory protection of all machine components that can be affected by corrosive materials.
  • Treatment includes E-Coat cooler cores, additional coating on main hydraulic valve, heat treated shrink sealant on hydraulic hoses, fittings and electrical wiring, all hinges greased, Zerust® vapor enclosure for electronic components, extra heavy duty alternator, turbine engine precleaner and varnish protection on engine compartment, internal chassis and all non-painted metallic parts.
972M XE Industrial & Waste moving bark in a Green Energy plant.

Se produktet i 360°

Drag your mouse to rotate the product

Les også

XE-trinnløs-drivlinje.jpg

Cat hjullastere med XE motorteknologi

Utvalgte Cat hjullastere i størrelsen 26 - 38 tonn er utstyrt med XE-motorteknologi som gir til økt effektivitet og redusert drivstofforbruk. Les mer om denne unike motorteknologien på Cat hjullastere.

BS Graveservice Cat 972M XE forsidebilde.jpg

Cat 972M XE i knuseverket hos BS Graveservice

Hos BS Graveservice går deres nye Cat 972M XE i knuseverket. Vi tok en prat med maskinfører Ole André Rekeland om den nye maskinen. Les mer her!

BS Graveservice Cat 340 forsidebilde.jpg

Cat 340 og Cat 972M XE sine første skuffetak hos BS Graveservice

Bli med på overlevering hos BS.Graveservice AS i Kristiansand, og se maskinførerne ta sine første skuffetak og bli kjent med Cat 340 og Cat 972M XE.


Relevante sider

Cat 930M Waste handler.jpg

Bruksområder Cat hjullastere

Cat hjullastere er svært allsidige maskiner. Våre hjullastere passer for alt fra lasting til brøyting til tunnelldrift. Se oversikt over bruksområdene og anbefalte maskiner til de ulike arbeidsoppgaver fra Cat 906M - 988K XE.

Cat 966M 1920x720_2.jpg

Differensiering medium hjullastere | Cat GC, M-serie og XE

Finn hjullasteren til ditt behov. Vi forklarer forskjellen mellom GC-serien, M-serien og XE-serien på Cat hjullastere fra 19 - 37 tonn

Maskinteknologi Cat hjullastere 860x480 px.jpg

Maskinteknologi Cat hjullastere

Cat maskinene er utrustet med en rekke spennende teknologiløsninger som bidrar til en optimal drift. 

Cat Advansys toppbanner.jpg

Cat Advansys

Optimaliser ytelsen på din 926-994 hjullaster eller 310-390 graver med Cat Advansys slitestål. Det nyeste og mest robust tannsystemet til Caterpillar gir høyest produktivitet og raskest montering og avmontering.

Toppbanner-Sveis

Sveisetjenester

Pon Equipment utfører alt innen sveising og vi har et stort sveiseverksted på avdelingen i Oslo, i tillegg til fire mobile sveisebiler som kommer dit du er i flere deler av landet. Vi har lang erfaring med alle typer sveisetjenester og svært moderne utstyr som knekkebord og skjærebord for alle typer sveiseoppdrag.

financing cat 360 solutions

Finansieringsløsninger

Cat Finans er Pon Equipment sin hovedsamarbeidspartner på finansiering. Vi tilbyr finansieringsløsninger som er tilpasset deg og din virksomhet. Vi tilbyr lån og leasingfinansiering på hele Pons Equipments produktspekter.

Kontakt

Ta kontakt hvis du har spørsmål.

  • Call
  • Arrow

Send meg et tilbud. 

Jeg ønsker å motta nyhetsbrev fra Pon.
Kontakt Tilbake Icon - Contact Sticky Cross
  • Call
  • Arrow

Ring oss

Send oss en e-post

Hvordan foretrekker du at vi kontakter deg? *
web-monitoring-ok