Cat 926M Ag Handler

Små hjullastere

Om Cat 926M Ag Handler

The Cat 926M Ag Handler sets a new standard for productivity, fuel efficiency and comfort. A high torque, low speed C7.1 engine works in concert with an intelligent hystat power train to deliver fuel efficiency as standard. A unique Power Balance in Range 1 for silage work maximizes productivity. Extremely low sound levels, large spacious cab and intuitive controls keep you working comfortably all day and even all night! Experience the new industry benchmark.

Spesifikasjoner

Motor

Maximum Gross Power	125 kW
Maximum Gross Torque - ISO 14396 (Performance Power Mode: Range 1-4)	815 N·m
Note (3)	No derating required up to 3000 m (10,000 ft) altitude. Auto derate protects hydraulic and transmission systems.
Bore (Performance Power Mode: Range 1-4)	105 mm
Maximum Net Torque - SAE J1349 (Performance Power Mode: Range 1-4)	797 N·m
Displacement (Performance Power Mode: Range 1-4)	7.01 l
Emissions	*The Cat C7.1 engine meets Tier 4 Final/EU Stage V emission standards.
Note (1)	**Range 4 power and torque is equal to Performance Mode with Caterpillar Power by Range technology.
Maximum Gross Power - Maximum Engine Speed (Performance Power Mode: Range 1-4)	1800 r/min
Note (2)	Net power ratings are tested at the reference conditions for the specified standard and denote power available at the flywheel when the engine is equipped with alternator, air cleaner, emission components and fan at specified speed.
Maximum Gross Power - ISO 14396 (Performance Power Mode: Range 1-4)	125 kW
Stroke - Performance Power Mode: Range 1-4	135 mm
Motormodel	Cat® C7.1*
Stroke (Standard Power Mode: Range 1-3**)	135 mm
Net Power - SAE J1349 at Minimum Fan Speed (Standard Power Mode: Range 1-3**)	116 kW
Net Power - ISO 9249 (metric) at Minimum Fan Speed (Performance Power Mode: Range 1-4)	122 kW
Maximum Gross Power - Maximum Engine Speed (Standard Power Mode: Range 1-3**)	1600 r/min
Maximum Gross Torque - ISO 14396 (Standard Power Mode: Range 1-3**)	795 N·m
Maximum Net Torque - ISO 9249 (Performance Power Mode: Range 1-4)	796 N·m
Displacement (Standard Power Mode: Range 1-3**)	7.01 l
Maximum Gross Power - ISO 14396 (Standard Power Mode: Range 1-3**)	119 kW
Bore (Standard Power Mode: Range 1-3**)	105 mm
Net Power - ISO 9249 at Minimum Fan Speed (Standard Power Mode: Range 1-3**)	116 kW
Maximum Gross Power - ISO 14396 (metric) (Performance Power Mode: Range 1-4)	125 kW
Net Power - SAE J1349 at Minimum Fan Speed (Performance Power Mode: Range 1-4)	122 kW
Net Power - ISO 9249 at Minimum Fan Speed (Performance Power Mode: Range 1-4)	122 kW
Engine Power - ISO 14396	125 kW
Engine Power - ISO 14396 - Metric	125 kW
Maximum Net Torque - SAE J1349 (Standard Power Mode: Range 1-3**)	777 N·m
Maximum Gross Power - ISO 14396 (metric) (Standard Power Mode: Range 1-3**)	119 kW
Maximum Net Torque - ISO 9249 (Standard Power Mode: Range 1-3**)	776 N·m
Net Power - ISO 9249 (metric) at Minimum Fan Speed (Standard Power Mode: Range 1-3**)	116 kW

Buckets

Bucket Capacities

1.9-5.0 m3 (2.5-6.5 yd3)

Weights

Operating Weight	12732 kg
Operating Weight - High Lift	13173 kg

Cab

ROPS	SAE J1040 MAY94, ISO 3471-1994
FOPS	SAE J/ISO 3449 APR98, Level II, ISO 3449 1992 Level II
Declared Sound Levels - Exterior Sound Power Level (ISO 6395:2008)*	101 dB(A)
Declared Sound Levels - Operator Sound Pressure Level (ISO 6396:2008)*	68 dB(A)
Note (2)	The Blue Angel environmental label is an optional attachment.
Note (1)	*The measurements were conducted at 70% of the maximum engine cooling fan speed. The sound level may vary at different engine cooling fan speeds. The cab was properly installed and maintained. The measurements were conducted with the cab doors and the cab

Loader Hydraulic System

Cycle Times - 1,600 rpm - Standard: Float Down (Maximum Lift to Ground Level)	2.6 s
Cycle Times - 1,600 rpm - Standard: Dump (at Maximum Lift Height)	1.7 s
Cycle Times - 1,600 rpm - Standard: Raise (Ground Level to Maximum Lift)	6.2 s
Maximum Flow - Implement Pump - 3rd and 4th Function Maximum Flow*	150 l/min
Relief Pressure - Tilt Cylinder	28000 kPa
Cycle Times - 1,800 rpm - Performance (HP+): Raise (Ground Level to Maximum Lift)	5.5 s
Cycle Times - 1,800 rpm - Performance (HP+): Float Down (Maximum Lift to Ground Level)	2.6 s
Cycle Times - 1,800 rpm - Performance (HP+): Total Cycle Time	9.6 s
Note	* 3rd and 4th function flow is fully adjustable from 20% to 100% of maximum flow through the secondary display.
Note (2)	Flow values listed are for a machine running in Performance Power Mode (1,800 rpm).
Maximum Flow - Implement Pump	150 l/min
Cycle Times - 1,600 rpm - Standard: Total Cycle Time	10.5 s
Cycle Times - 1,800 rpm - Performance (HP+): Dump (at Maximum Lift Height)	1.5 s
Relief Pressure - Tilt Cylinder - 3rd and 4th Function Maximum Working Pressure	26000 kPa
Note (1)	Implement system uses a dedicated load sensing variable displacement pump with dual double acting lift cylinders and a single double acting tilt cylinder.
Maximum Working Pressure - Implement Pump	26000 kPa
Relief Pressure - Tilt Cylinder - 3rd and 4th Function Relief Pressure	28000 kPa
Lift Cylinder: Standard Lift Linkage - Stroke	728 mm
Lift Cylinder: Standard Lift Linkage - Rod Diameter	60 mm
Tilt Cylinder: Standard Lift Linkage - Bore Diameter	140 mm
Tilt Cylinder: Standard Lift Linkage - Rod Diameter	75 mm
Lift Cylinder: Standard Lift Linkage - Bore Diameter	110 mm
Tilt Cylinder: Standard Lift Linkage - Stroke	516 mm

Operating Specifications

Full Turn Tip Load	7453 kg
Full Turn Tip Load - High Lift	5405 kg

Transmission

Forward - Range 3	27 km/h
Reverse - Range 3	27 km/h
Note	* Creeper control allows maximum speed range adjustability in the forward direction from 1 km/h to 13 km/h in Range 1 through the secondary display when equipped. Factory default is 7 km/h. Maximum reverse speed will be maintained at 13 km/h in Range 1 fo
Reverse - Range 4	40 km/h
Forward - Range 4	40 km/h
Reverse - Range 1*	13 km/h
Forward - Range 2	13 km/h
Forward - Range 1*	1-13 km/h (0.6-8 mph)
Reverse - Range 2	13 km/h

Steering

Steering Cycle Times - Full Left to Full Right - Maximum RPM: 90 rpm Steering Wheel Speed	2.4 s
Steering Cylinder, Double Acting - Bore Diameter	70 mm
Steering Articulation Angle - Each Direction	40°
Maximum Working Pressure - Steering Pump	24130 kPa
Steering Cylinder, Double Acting - Stroke	438 mm
Steering Cylinder, Double Acting - Rod Diameter	40 mm
Maximum Flow - Steering Pump	130 l/min
Note (1)	Steering system uses a dedicated load sensing variable displacement pump with dual double acting cylinders.
Number of Steering Wheel Turns - Full Left to Full Right or Full Right to Full Left	3.5
Steering Cycle Times - Full Left to Full Right - Minimum RPM: Pump Flow Limited	2.8 s
Note (2)	Flow values listed are for a machine running in Performance Power Mode (1,800 rpm).

Påfyllingskapasitet

Drivstofftank	195 l
Axles - Front	21 l
Hydraulic Tank	90 l
Hydraulic System - Including Tank	160 l
Axles - Rear	21 l
Cooling System	30 l
Engine Crankcase	20 l
Transmission - Gear Box	8.5 l
Diesel Exhaust Fluid (DEF) Tank	19 l

Tires

Option (2)	20.5 R25, Radial (L-5)
Option (1)	20.5 R25, Radial (L-3)
Option (3)	620/65 R25 Ag Tire
Option (4)	750/65 R25 Ag Tire*
Note	* Base specification tire. Other tire choices available, contact your Cat dealer for details.

Power Train

Note	* Differential front locking axle can be engaged on the go at full torque to 10 km/h.
Front Axle	Fixed
Brakes - Parking	Spring applied hydraulically released
Brakes - Service	Inboard wet disc
Rear Axle - Traction Aid	Limited slip differential optional
Front Axle - Traction Aid*	Locking differential standard
Rear Axle - Oscillation Angle by Tire Size - 20.5 R25	± 10.5 degrees
Note (1)	Power train is governed by the Caterpillar exclusive Intelligent Power Management system to deliver peak performance and efficiency.
Rear Axle	Oscillating
Rear Axle - Oscillation Angle by Tire Size - 750/65, 620/65	± 7 degrees

Sustainability

Recyclability

94%

Egenskaper

Efficiently Powerful

Experience hybrid-like fuel efficiency with an intelligent hydrostatic power train and industry leading fuel savings through a lower maximum engine speed of just 1,600 rpm in Standard Mode. Power when you need it with Caterpillar's exclusive Power‑by-Range technology that increases power in Range 4 for improved speed on grade. For your toughest and most demanding farm applications a new Performance Mode will allow you to boost the power and hydraulic speed in all Ranges to get the job done even quicker. Meets EU Stage V emission standards with a Cat® C7.1 engine that is designed to manage itself so you can concentrate on your work.

Work Made Easy

Move more with Caterpillar's patented quick loading Performance Series buckets and optimized Z-bar linkage that combines the digging efficiency of a traditional Z-bar with tool carrier capabilities. The parallel lift throughout the working range allow you to safely and confidently handle loads from bales to silage with precise control. Multi-function work has never been easier with dedicated pumps for each system and a flow sharing implement valve governed by an intelligent power management system. Simultaneously lift, steer and drive without compromise.

Enjoy All Day Comfort

Have a seat in the 926M Ag Handler and enjoy automatic temperature control, class leading sound levels, excellent all around visibility and low-effort joystick controls that move with you on a fully adjustable seat suspension. A large spacious operator environment combined with Caterpillar's exclusive hydraulic cylinder damping and smooth predictable controls make this the most comfortable seat on the farm.

Customize Your Experience

Fine tune machine performance with adjustments at your fingertips through the soft touch buttons and optional secondary touch screen display. Quickly set auxiliary flow to optimize grapple or silage defacer speed, enable auto reversing fan to breathe clean in dusty environments, toggle over to fine mode for improved control when bale stacking, program linkage kick-out positions for easy feed wagon loading, adjust wheel torque to match underfoot conditions when cleaning corrals and customize ride control activation speed for a smooth loaded carry run. The 926M Ag Handler is ready for the challenge on your farm!

Sustainability

The Cat® C7.1 engine meets U.S. EPA Tier 4 Final, EU Stage V and Korea Tier 5 emission standards.
Engine Idle Management System (EIMS) helps maximize fuel efficiency and reduce greenhouse gas emissions while maintaining machine performance.
Engine Idle Shutdown Timer reduces fuel burn, greenhouse gas emissions and unnecessary idle time by shutting down the machine after a pre-set idling period.
Performance Series Buckets have rounded side boards, a longer floor and open angle to carry more and load quicker so each pass is the most efficient.
Rimpull Control is a quick way to adjust the torque to the tires for less slipping and tire wear.
Cat® Production Measurement provides real-time payload weighing which help you maximize productivity, reduce fuel burn and greenhouse gas emissions, all while improving job site efficiency and lowering costs.
Extended maintenance intervals not only reduce downtime but decrease the amount of fluid and filters that are replaced over the life of the machine.
Power on Demand, transparent to the operator, provides full-time efficiency and power when you need it.
Tire Pressure Monitoring provides real-time tire pressure information to the operator to help increase tire wear and achieve better fuel efficiency and reduced greenhouse gas emissions.
Intelligent Hystat Transmission helps improves control and reduces fuel consumption and greenhouse gas emissions in load and carry applications.
Variable Displacement Pumps match power to load as application requirements change.