Cat 272D3 XHP

Kompaktlaster, hjul

Om Cat 272D3 XHP

The Cat® 272D3 XHP Skid Steer Loader, with its powerful engine, high output hydraulic system, high lift forces and vertical lift design, provides the maximum performance for work tool productivity, digging, truck loading and material handling.

Spesifikasjoner

Motor

Motormodel	Cat C3.8 DIT (turbo)
Net Flywheel Power	106 HP
Gross Power - SAE J1995	110 HP
Net Power - SAE 1349	106 HP
Displacement	232 in³
Stroke	4.7 in
Bore	3.9 in
Net Power - ISO 9249	107 HP
Peak Torque - 1,500 rpm - SAE J1995	276 ft·lbf

Weights

Operating Weight	9255 lb
Note	Operating Weight, Operating Specifications and Dimensions all based on 75 kg (165 lb) operator, all fluids, two speed, ride control, enclosed cab with glass door, side windows, air conditioning, air ride seat, advanced display, rearview camera, 1,000 CCA

Operating Specifications

Rated Operating Capacity	3650 lb
Tipping Load	7300 lb
Breakout Force - Tilt Cylinder	7362 lb
Breakout Force - Lift Cylinder	6085 lb
Note	Operating Weight, Operating Specifications and Dimensions all based on 75 kg (165 lb) operator, all fluids, two speed, ride control, enclosed cab with glass door, side windows, air conditioning, air ride seat, advanced display, rearview camera, 1,000 CCA
Rated Operating Capacity with Optional Counterweight	3900 lb

Dimensjoner

Wheel Base	54.6 in
Height - Top of Cab	84 in
Vehicle Width over Tires	76 in
Ground Clearance	10.4 in
Departure Angle	28°
Maximum Dump Angle	51°
Bucket Pin Height - Carry Position	9.3 in
Bucket Pin Height - Maximum Lift	128.6 in
Bucket Pin Reach - Maximum Lift	13.5 in
Bumper Overhang - Behind Rear Axle	46.2 in
Clearance at Maximum Lift and Dump	97.4 in
Length - With Bucket on Ground	155 in
Length - Without Bucket	127 in
Maximum Overall Height	161.5 in
Maximum Reach - With Arms Parallel to Ground	49.1 in
Rack Back Angle - Maximum Height	84°
Reach - Maximum Lift/Dump	29 in
Turning Radius from Center - Bucket (racked)	90.6 in
Turning Radius from Center - Coupler	57.7 in
Turning Radius from Center - Machine Rear	74.7 in
Note	Operating Weight, Operating Specifications and Dimensions all based on 75 kg (165 lb) operator, all fluids, two speed, ride control, enclosed cab with glass door, side windows, air conditioning, air ride seat, advanced display, rearview camera, 1,000 CCA
Roll Back Angle	28°

Hydraulic System

Hydraulic Flow - XHP - Hydraulic Power (Calculated)	94 HP
Hydraulic Flow - XHP - Maximum Loader Hydraulic Flow*	40 gal/min
Hydraulic Flow - XHP - Maximum Loader Hydraulic Pressure	4061 psi
Note	*When equipped with Cat 400 Series work tools.
Standard Flow Mode - Hydraulic Power - Calculated	44 HP
Standard Flow Mode - Loader Hydraulic Flow	23 gal/min
Standard Flow Mode - Loader Hydraulic Pressure	3335 psi

Cab

ROPS	ISO 3471:2008
FOPS	ISO 3449:2005 Level I
FOPS Level II	ISO 3449:2005 Level II

Power Train

Travel Speed - Forward or Reverse - One Speed	7.2 mile/h
Travel Speed - Forward or Reverse - Two Speed	10.3 mile/h

Påfyllingskapasitet

Cooling System	4.1 gal (US)
Engine Crankcase	3.5 gal (US)
Drivstofftank	32.2 gal (US)
Hydraulic System	14.5 gal (US)
Hydraulic Tank	10.3 gal (US)
Chain Box - Each Side	2.7 gal (US)
Diesel Exhaust Fluid (DEF) Tank	5 gal (US)

Air Conditioning System

Air Conditioning

The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 0.81 kg of refrigerant which has a CO2 equivalent of 1.158 metric tonnes.

Noise Level

Inside Cab**	83 dB(A)
Note (1)	Cab and Rollover Protective Structures (ROPS) are standard in North America and Europe.
Note (2)	**The declared dynamic operator sound pressure levels per ISO 6396:2008. The measurements were conducted with the cab doors and windows closed and at 70% of the maximum engine cooling fan speed. The sound level may vary at different engine cooling fan spe
Note (3)	***The labeled sound power level for the CE marked configurations when measured according to the test procedure and conditions specified in 2000/14/EC.
Outside Cab***	104 dB(A)

Egenskaper

Comfortable Cab

Industry leading sealed and pressurized cab option provides a cleaner and quieter operating environment with excellent work tool visibility. Standard high-back, heated, air ride seat with seat mounted adjustable joystick controls makes Cat Skid Steer Loaders the industry leader in operator comfort.

Advanced Display

Maximize machine capability and control with the standard Advanced Display providing on-screen adjustments for implement response, hystat response and creep control. Also features multi-language functionality with customizable layouts, security system and rearview camera.

Powerful Performance

High performance power train provides maximum performance and production capability through the Electronic Torque Management system, standard two speed travel and an electronic hand/foot throttle with decel pedal capability. XHP hydraulic system provides high flow and high pressure that delivers industry leading hydraulic horsepower to efficiently run even the most power hungry work tools. Electronically controlled Cat C3.8 engine provides high horsepower and torque while meeting U.S. EPA Tier 4 Final/EU Stage IV emission standards. Cat “Intelligent Leveling” system (ILEV) provides industry leading technology, integration and features such as dual direction self level, work tool return to dig and work tool positioner.

Ride Control

Standard Speed Sensitive Ride Control system improves operation on rough terrain, enabling better load retention, increased productivity and greater operator comfort.