Cat 14

Veihøvler

Driftsvekt: 23 tonn

Bladbredde: 4,2 meter

Bruttoeffekt: 178 kW/ 238 hk

14 Motor Grader with push block and ripper

Om Cat 14

The industry standard continues to roll forward with the Cat® 14 (14M3) motor grader. With a larger engine, improved fuel economy and machine balance, enhanced transmission performance and a range of technology, this machine is ready to excel at your grading projects.

Cat 14 veihøvel med en rekke teknologiske løsninger solgt til Norsk Stein på Tau. Les mer om dette her

Spesifikasjoner

Motor

Base Power (1st Gear) - Net	178 kW
Motormodel	Cat C13
Bore	130 mm
Stroke	157 mm
Speed at Rated Power	1,850 rpm
Note (3)	Net power advertised is the power available at rated speed of 1,850 rpm, measured at the flywheel when engine is equipped with fan, air cleaner, muffler and alternator.
Standard Capability	50 °C
Note (2)	Optimized VHP Plus is standard for the 14M3.
Torque Rise	41%
Maximum Altitude - Full Power	4237 m
Maximum Torque - VHP Plus	1542 N·m
Emissions	Tier 4 Final/Stage V, Tier 3/Stage IIIA equivalent or Tier 2/Stage II equivalent
Maximum Altitude - Full Power (Tier 3)	4374 m
Maximum Altitude - Full Power (Tier 2)	3672 m
Note (1)	Net power is tested per ISO 9249, SAE J1349, and EEC 80/1269 Standards in effect at the time of manufacture.
Standard - Fan Speed - Minimum	550 rpm
Note (4)	Power as declared per ISO 14396. Rated rpm 1,850. VHP+ = 228 kW (306 hp)
Displacement	12.5 l
Number of Cylinders	6
Note (5)	Cat engines equipped with a Selective Catalytic Reduction (SCR) system are required to use: Diesel Exhaust Fluid (DEF) which meets the requirements outlined in the International Organization for Standardization (ISO) standard 22241-1.
Standard - Fan Speed - Maximum	1,600 rpm

Frame

Circle - Outer Diameter	1822 mm
Front Axle - Wheel Lean - Left/Right	17.1°
Front Axle - Total Oscillation per Side	32°

Påfyllingskapasitet

Transmission and Differential	89 l
Diesel Exhaust Fluid Tank (Tier 4 Only)	22 l
Hydraulic System	125 l
Circle Drive	7 l
Cooling System	60 l
Drivstofftank	416 l

Moldboard

Blade Width	4.2 m
Arc Radius	413 mm
Throat Clearance	117 mm
Blade Width - With End Bits	4290 mm
Blade Height - With Cutting Edge	631 mm
Blade Width - Without End Bits	4166 mm
Blade Height - Without Cutting Edge	585 mm

Blade Range

Maximum Depth of Cut	593 mm
Circle Centershift - Left	650 mm
Maximum Lift Above Ground	419 mm
Circle Centershift - Right	520 mm
Blade Tip Range - Backward	5°
Maximum Shoulder Reach Outside of Tires - Right	2004 mm
Moldboard Sideshift - Right	790 mm
Moldboard Sideshift - Left	740 mm
Maximum Shoulder Reach Outside of Tires - Left	1870 mm
Blade Tip Range - Forward	40°

Weights

Operating Weight - Typically Equipped	25968 kg
Gross Vehicle Weight - Base* - Total	23124 kg
Gross Vehicle Weight - Base* - Front Axle	6344 kg
Gross Vehicle Weight - Typically Equipped - Total	25968 kg
Gross Vehicle Weight - Typically Equipped - Rear Axle	19053 kg
Gross Vehicle Weight - Typically Equipped - Front Axle	6915 kg
Gross Vehicle Weight - Base* - Rear Axle	16780 kg
Note	*Base operating weight calculated on standard machine configuration with 20.5 R25 tires, full fuel tank operator and ROPS cab.

Air Conditioning System

Air Conditioning

The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 2.0 kg (4.4 lb) of refrigerant which has a CO2 equivalent of 2.860 metric tonne (2.76 ton).

Egenskaper

TECHNOLOGY THAT GETS WORK DONE

Optional Stable Blade improves grading precision by decreasing engine speed at 15 percent intervals when machine bounce is detected then increases engine rpm systematically when grader stabilizes.
Optional Cat Grade with Cross Slope helps maintain desired cross slope by automatically controlling one side of the blade.
Optional Cat Grade uses positioning and guidance technologies, machine sensors, and automatic blade control to help get to grade faster, easier, and more efficiently.
Optional Auto Articulation allows you to articulate automatically while steering in tight spaces or around curves, obstacles, and turnarounds.
Manage your fleet of machines while reducing fuel burn with Cat Production Measurement System option. The Efficiency Coach and Application Segmentation work together to monitor operators and machines simultaneously. Measure your jobsite’s efficiency and productivity from anywhere on the website.

MOVE MORE, BURN LESS

Cat C13 engine meets U.S. EPA Tier 4 Final/EU Stage V, Tier 3/Stage IIIA equivalent or Tier 2/Stage II equivalent emission standards, depending on emission standards of specific country.
Standard Economy Mode can be turned on to limit maximum engine speed which helps reduce fuel consumption.
Standard VHP Plus provides ideal amount of power in all gears.
Standard Automatic Differential Lock unlocks differential during a turn and re-locks when straight for easier operation and improved power train protection.

MORE CONTROL AND EFFICIENCY

Load-sensing system and advanced electro hydraulics give operator superior implement control and hydraulic performance.
Proportional Priority Pressure-Compensating valves have different flow rates for head and rod ends of cylinder so machine responds consistently and predictably.
Balanced hydraulic flow is proportioned to ensure all implements will operate simultaneously without slowing engine or speed of some implements.

DESIGNED FOR OPERATORS

Simple, intuitive joystick controls replace levers, so hand and arm movement is reduced by 78%, helping reduce operator fatigue.
Optional Advanced Control Joysticks allow operator to control automated grading solutions efficiently and safely without removing hands from the joysticks.
Selectable blade lift modes – Fine, Normal, or Coarse – allow operator to match application requirements.
Articulation Return-to-Center automatically returns machine to a straight frame position from any angle with the touch of a button.

BUILT-IN SAFETY FEATURES

Optional rear vision camera enhances sight to rear of machine.
Electrical disconnect and engine shutoff switches are ground level.
Operator Presence System keeps parking brake engaged and hydraulic implements disabled until operator is seated and machine is ready for operation.
Hydraulic Lockout disables all implement functions while still providing machine steering control – especially useful while roading.
Optional seat belt indicator promotes safe operating habits.

SAVE MAINTENANCE TIME

Convenient access from the top of the circle to the patented top-adjust wear strips and inserts make them easy to add or replace.
Shim less Moldboard Retention System uses vertical and horizontal adjusting screws to keep moldboard wear strips aligned for reduced blade chatter and precise blade control.