Om Cat H95s

 

Used for demolition and construction applications.

Spesifikasjoner

Impact Frequency 700-1260 bpm
Optimal Hydraulic Flow 70-150 lpm (18-40 gpm)

Egenskaper

Application

Application
Used in a wide range of construction and light demolition applications - such as breaking concrete sidewalks and driveways, pavement, roads, masonry, site prep and landscaping, and breaking frozen ground for utility repairs.

Silenced

Silenced
Fully enclosed, silenced housing lowers overall noise level for a quieter, safer job site. Internal power cell is protected, designed and engineered to eliminate stress points.

Flat Top/Top-Mount Style

Flat Top/Top-Mount Style
Flat top/top-mount style provides a larger work area and excellent operator visibility with a common footprint and hole pattern for optimum versatility. Top-mount style increases impact power by keeping breaker force and stick force in line. A top-mount bracket will transfer back significantly less recoil and bending stress into the end of the stick, resulting in reduced impact on machine structures. Full complement of mounting brackets is available to suite coupler or pin-on preference.

Auto Shut Off (ASO)

Auto Shut Off (ASO)
ASO instantly stops the piston when breaking through material, preventing blank firing, a key contributor to hammer wear. Internal stresses are reduced, hammer is protected regardless of operator skill level.

Tri-Suspension System

Tri-Suspension System
Tri-Suspension system comprises the suspension jacket, the upper and lower buffers. Suspension aligns power cell and gives manageable, smooth performance.

Standing Height Grease Point

Standing Height Grease Point
Standing height grease point makes required maintenance comfortable and easy to perform.

Easy to Tune & Maintain

Easy to Tune & Maintain
Gas ports and valves are easy to check and charge while hammer is mounted to machine.

Ports Positioned for Hose Protection

Ports Positioned for Hose Protection
Improved routing protects against force and dirt during impact, eliminating downtime.

Hammer Tools

Hammer Tools
Tools are heat-treated, matched to piston diameter and provide optimum mass to deliver full blow energy.

Se produktet i 360°

Drag your mouse to rotate the product

Kontakt

 

Ta kontakt hvis du har spørsmål.

 

  • Call
  • Arrow

Send meg et tilbud. 

250/250
Jeg ønsker å motta nyhetsbrev fra Pon.
Kontakt Tilbake Icon - Contact Sticky Cross
  • Call
  • Arrow

Ring oss

 

Våre åpningstider er 08:00 - 16:00

 

  • Ring Pon Equipment AS
    (for kjøp av Cat maskiner og utstyr)
  •  
  • Call21 08 41 00
  •  
  • Ring Pon Power AS
    (for kjøp av Cat motorer og aggregat)
  •  
  • Call23 17 05 00
  •  
  • Ring Pon Rental AS
    (for leie av maskiner og utstyr)
  •  
  • Call21 08 43 00

Send oss en e-post

Vi svarer deg så fort vi kan.

Hvordan foretrekker du at vi kontakter deg? *
250/250

 

ELLER FYLL UT SKJEMA HER:

 

Fyll ut skjemaet nedenfor, så kontakter jeg deg så snart som mulig.

 

Hvordan vil du at vi skal kontakte deg? *
250/250
web-monitoring-ok