CB1.8 Utility Roller

Cat CB1.8

Scroll nedover for mer info om:


Operating Weight 1735 kg
Operating Specifications
Standard Compaction Width 1000 mm
Curb Clearance 403 mm
Ground Clearance 251 mm
Static Linear Load 9.1 kg/cm
Travel Speed - Maximum 8.6 km/h
Gross Power 18.4 kW
Overall Length 2040 mm
Overall Width 1112 mm
Drum Diameter 575 mm
Drum Width 1000 mm
Maximum Machine Height 2400 mm
Vibratory System
Frequency 57 Hz
Centrifugal Force per Drum - Maximum 13.6 kN
Nominal Amplitude - High 0.47 mm
Fuel Tank Capacity 30 l
Water Spray Tank Capacity 145 l


Comfort and Control

Roomy Operating Station
The roomy operating station with abundant leg room and standard, adjustable seat improves visibility. The seat is equipped with an operator presence sensor for enhanced safety and water drainage capability.
Instrument Panel
The controls are centrally located for operator ease and safety. Key controls such as drum vibe selection, water spray on/off and intermittent settings are logically placed and easy to adjust. The easily observed warning lights provide quick feedback to the operator.
The sloped engine hood enables excellent forward visibility and minimal side clearance creates direct sight lines to working areas.

Smooth, Efficient Powertrain

Powerful Engine
The Cat C1.1 engine delivers 18.4 kW (24.7 hp) of power. It meets regional engine emissions standards, has a pre-heat starting system, and is serviced and supported by Cat Dealers.
Cooling System
The cooling system with integrated water and oil cooler utilizes an aluminum radiator that provides corrosion resistance and reliability. Large space between cores provide efficient cooling and easy cleaning. The system is effective in high-ambient temperatures up to 50� C (122� F).

Maneuverability and Transport

Size and Steering
The articulated frame with sealed articulation bearings has a low center of gravity that provides optimum stability on asphalt or soil/aggregate.
The foldable ROPS facilitates machine transportability and can be folded forward without the use of tools. The short machine length allows it to fit crosswise on a trailer, while high ground clearance facilitates driving up trailer ramps. The machine is equipped with four lifting points for attaching an optional spreader bar.

Perfectly Matched

Vibratory System and Drums
The CB1.8 utilizes 1000 mm (39") tandem vibratory drums. Vibratory selection includes front drum only or both drums for versatility on the job site. The system automatically starts when the propel lever is engaged.
Dual Drum Drive Powertrain
The dual-drum drive powertrain provides continuous full-drum traction on soft base materials, uneven surfaces and steeper grades. The rounded drum edge prevents cutting into mat for better mat quality.

Consistent Water Spray Coverage

Pressurized System
The standard 30 L (7.9 gal) tank maximizes time between refills. Eight intermittent spray settings optimize usage, while four nozzles at rear and front of each drum evenly distributes water coverage.
Easy Service
The system is equipped with corrosion-proof materials that are easy to clean. The spray bars and spray nozzles can be removed by hand, without the use of tools. The system is double-filtered system to help prevent clogging and a single drain port simplifies clean-out.


Easy Component Access
The engine hood and operating platform are equipped with lift assist for quick access and servicing. The battery and water pump are easy to reach with the operator platform in the raised position. External engine components, hydraulics and routine service points are grouped for simplified access and ecology-minded draining.
Effortless Maintenance
Large space between radiator and oil cooler core provide easy cleaning. The fuel and water tanks are also conveniently located for fast cleaning. The electrical system utilizes color-coded wires, all-weather connections and nylon braiding to provide reliability and protection.

360° Exterior View (HTML)

360° Exterior view. Double click on the image to zoom in on any area of the product.



Ta kontakt hvis du har spørsmål.


  • Call
  • Arrow


Pon Equipment: +47 21 08 41 00
Pon Rental:        +47 21 08 43 00
E-post:                firmapost@pon-cat.com


Finn våre avdelinger her.





Brosjyren er klar. 

Fyll ut skjema og brosjyren blir sendt til din e-postadresse umiddelbart. 

Send meg et tilbud. 

  • Call
  • Arrow

Send oss en e-post


Vi svarer deg så fort vi kan. 


Hvordan foretrekker du at vi kontakter deg? *
Hvilket selskap gjelder din henvendelse? *