Cat ATC-300+ CONTROLLER

ATS ATC Breaker / Contactor

A007216.png

About the Cat ATC-300+ CONTROLLER

 

The ATC-300+ is a comprehensive and multifunctional microprocessor-based ATS controller. It is a compact and self-contained panel-mounted device that is designed to replace traditional relay and solid-state logic panels. The ATC-300+ Controller provides programmed flexibility to address the needs of any system. It operates from all system voltages between 120 to 600V, single-phase and three-phase at 50 or 60 Hz. In addition, a period of no control power is provided. The controller monitors the condition of the three-phase line-to-line voltage and frequency of Source 1 and Source 2 power sources and can be programmed for single-phase operation. The ATC-300+ Controller provides the intelligence to ensure that the ATS operates properly through a series of programmed sensing and timing functions.

Features

Features

Product Features

Product Features
  • Auxiliary relay contacts:
    • Source 1 present 2NO and 2NC
    • Source 2 present 2NO and 2NC

  • Source 1 and source 2 sensing:
    • Undervoltage / underfrequency
    • Overvoltage / overfrequency
    • Three-phase rotation protection
    • Three-phase voltage unbalance/loss

  • Pre-transfer signal contacts 1NO and 1NC
  • Go to emergency (Source 2)
  • Seven field-programmable time delays
  • LCD-based display for programming, system diagnostic and help message display
  • Mimic diagram with source available and connected LED indication
  • Time-stamped history log
  • System test pushbutton
  • Programmable plant exercise (off, daily, 7,14 and 28 day) interval selectable run time 0-600 minutes no load/load with fail-safe
  • Integral overcurrent protection (optional)
  • In-phase transition
  • Stainless steel cover for controller (optional)
  • Communications via RS-232 or Modbus through an integrated RS-485 port (optional)

Contact

 

Please contact us for requests or advise. 

 

  • Call
  • Arrow

Request a quotation

 

250/250
Contact Close Icon - Contact Sticky Cross
  • Call
  • Arrow

CALL US

Opening hours: 08:00 - 16:00

  • Call Pon Equipment AS
    (for buyubg Cat maskines and worktools)
  •  
  • Call21 08 41 00
  •  
  • Call Pon Power AS
    (for buying Cat enginges and power supply)
  •  
  • Call23 17 05 00
  •  
  • Call Pon Rental AS
    (for renting machines and other equipment)
  •  
  • Call21 08 43 00

Email us

We will get in contact within 24 hours.

How would you like us to contact you? *
250/250

 

Fill in the form below and I will contact you as soon as possible.

 

How would you like us to contact you? *
250/250
web-monitoring-ok