Cat C9 (50 Hz)

Diesel Generator

CM20170808-18127-24105.png

About the Cat C9 (50 Hz)

 

Producing reliable power from 230 kVA to 330 kVA at 50 Hz, our C9 diesel generator sets are made to meet your standby and prime applications. Each is designed to meet ISO 8528-5 transient response requirements and accept 100 percent rated load in one step. All C9 generator sets are engineered to EPA Stationary Emergency (Tier 3) emissions standards — it's how we're helping protect and power the world you live in. Seismic certification is also available to maintain power during unexpected disturbances. Our integrated control system, including ATS and switchgear, ensures a consistent power supply and connection to your fleet through on-site and remote monitoring options. The EMCP 4 control panel, with a user-friendly interface, puts our management and diagnostic tools in one. We offer a wide range of accessories and bolt-on system expansion attachments so you can adapt your generator sets to your needs. Find flexible packaging options to work with your spatial requirements and environmental conditions. Even select from UL 2200 and CSA certified package options for added safety. Tailor your C9 generator sets to take on today's power needs — and tomorrow's.

Specifications

Generator Set Specifications
Height - Maximum 73.5 in
Length - Maximum 157 in
Width - Maximum 47.5 in
Minimum Rating 230 kVA
Maximum Rating 330 kVA
Voltage 220-480 Volts
Frequency 50 Hz
Speed 1500 RPM
Generator Set Configurations
Emissions/Fuel Strategy EU Stage IIIA, Low Fuel Consumption, U.S. EPA Certified for Stationary Emergency Use only ( Tier 3 Nonroad Equivalent Emission Standards)
Engine Specifications
Engine Model C9 ATAAC, I-6, 4-Stroke Water-Cooled Diesel
Compression Ratio 16.1:1
Aspiration Air to Air Aftercooled
Governor Type Adem™A4
Fuel System Hydraulic electronic unit injection
Bore 4.41 in
Displacement 537.01 in³
Stroke 5.87 in

Features

Design Criteria

Design Criteria
The generator set meets transient response and block loading steps as per ISO 8528-5.

Cat Diesel Engines

Cat Diesel Engines
The four cycle Cat diesel engine combines consistent performance with excellent fuel economy and transient response that meets or exceeds ISO 8528-5. The engines have been designed and built for a wide range of applications and can be optimized for low fuel consumption or low emissions. The engines feature a reliable, rugged, and durable design that has been field proven in thousands of applications worldwide from emergency standby installations to continuously operating power plants.

Cat Diesel Engine Features

Cat Diesel Engine Features
  • Reliable, rugged, durable design
  • Field-proven in thousands of applications worldwide
  • Four-stroke-cycle diesel engine combines consistent performance and excellent fuel economy with minimum weight
  • Generators

    Generators
    The generators used on Cat packages have been designed and tested to work with the Cat engine. The generators are built with robust Class H insulation and provide industry leading motor starting capability. They provide high efficiency in a majority of applications and optional coastal protection for the windings is available for harsh environments.

    Cat Generator Set Packages

    Cat Generator Set Packages
    Cat® generator set packages have been fully prototype tested, and certified torsional vibration analysis reports are available. The packages are designed to meet the NFPA 110 requirement for loading, and conform to the ISO 8528-5 steady state and transient response requirements.

    Generator Features

    Generator Features
  • Matched to the performance and output characteristics of Cat engines
  • Industry leading mechanical and electrical design
  • Industry leading motor starting capabilities
  • High Efficiency
  • Cat EMCP Control Panel

    Cat EMCP Control Panel
    The EMCP controller features the reliability and durability you have come to expect from your Cat equipment. EMCP4 is a scalable control platform designed to ensure reliable generator set operation, providing extensive information about power output and engine operation. EMCP4 systems can be further customized to meet your needs through programming and expansion modules.

    Cooling System

    Cooling System
    The cooling system has been designed to operate in standard ambient temperatures up to 50°C (122°F) with an air flow restriction of 0.5 in water. The factory installed cooling system has been designed and tested to ensure proper generator set cooling, and includes the radiator, fan, belts, and all guarding installed as standard. Contact your Cat Dealer for specific ambient and altitude capabilities.

    Single-Source Supplier

    Single-Source Supplier
    Fully prototype tested with certified torsional vibration analysis available

    World Wide Product Support

    World Wide Product Support
    Cat dealers provide extensive post-sale support including maintenance and repair agreements. Cat dealers have over 1,800 dealer branch stores operating in 200 countries. The Caterpillar S•O•S℠ program cost effectively detects internal engine component condition, even the presence of unwanted fluids and combustion by-products

    Contact

     

    Please contact us for requests or advise. 

     

    • Call
    • Arrow

    Request a quotation

     

    250/250
    Contact Close Icon - Contact Sticky Cross
    • Call
    • Arrow

    CALL US

    Opening hours: 08:00 - 16:00

    • Call Pon Equipment AS
      (for buyubg Cat maskines and worktools)
    •  
    • Call21 08 41 00
    •  
    • Call Pon Power AS
      (for buying Cat enginges and power supply)
    •  
    • Call23 17 05 00
    •  
    • Call Pon Rental AS
      (for renting machines and other equipment)
    •  
    • Call21 08 43 00

    Email us

    We will get in contact within 24 hours.

    How would you like us to contact you? *
    250/250

     

    Fill in the form below and I will contact you as soon as possible.

     

    How would you like us to contact you? *
    250/250
    web-monitoring-ok