Cat G3412C

Gas Compression Engines

C833643.png

About the Cat G3412C

 

Tough and durable, built on the industry-standard G3400 platform bring maximum uptime and low operating cost to your operation. G3412C Low Emissions (LE) engines meet the most demanding continuous duty gas compression applications with virtually no unscheduled downtime.Ideal applications for G3412C (LE) engines include gas lift, gas gathering, and wellhead gas compression. Cat G3412C (LE) gas engine. Ratings: 475 bkW (637 bhp) @ 1800 rpm are NSPS site compliant capable with customer-provided aftertreatment.

Specifications

Engine Specifications
Minimum Rating 637 BHP
Maximum Rating 637 BHP
Emissions NSPS Site Compliant Capable
Displacement 1649 in³
Compression Ratio 8.5:1
Aspiration Turbocharged-Aftercooled
Rotation from Flywheel End Counterclockwise
Flywheel and Flywheel Housing SAE No. 0
Flywheel Teeth 136
Weight - Dry 4720 lb
Oil Change Interval 750 hours
Ignition, Protection Cat EIS
Stroke 6 in
Bore 5.4 in
Capacity for Liquids
Cooling System 14.5 gal (US)
Lube Oil System - Refill 45 gal (US)

Features

Engine Design

Engine Design
- Proven reliability and durability- Ability to burn a wide spectrum of gaseous fuels- Robust diesel strength design prolongs life and lowersowning and operating costs- Broad operating speed range

Emissions

Emissions
- Meets U.S. EPA Spark Ignited Stationary NSPSEmissions for 2007/8- 2.0 g/bhp-hr NOx emission versions available- Larger turbocharger and aftercooler provide leanair/fuel mixture, low emissions, and excellent fuelconsumption

Lean Burn Engine Technology

Lean Burn Engine Technology
Lean-burn engines operate with large amounts of excessair. The excess air absorbs heat during combustionreducing the combustion temperature and pressure,greatly reducing levels of NOx. Lean-burn design alsoprovides longer component life and excellent fuelconsumption.

Caterpillar Electronic Ignition System (EIS)

Caterpillar Electronic Ignition System (EIS)
Detonation sensitive timing protects the engine againstdetonation damage. Higher voltage and longer sparkduration mean easier starts, fewer misfires, andsmoother operation. Diagnostic codes help pinpointcylinder and component of interest. Spark plugmaintenance codes identify spark plug condition

Ease of Operation

Ease of Operation
-    Deep sump oil pan has a larger capacity for normal750-hour oil change intervals- High-strength pan and rails for excellent mounting andstability- Side covers on block allow for inspection of internalcomponents

Full Range of Attachments

Full Range of Attachments
Large variety of factory-installed engine attachmentsreduces packaging time

Testing

Testing
Every engine is full-load tested to ensure proper engineperformance.

Gas Engine Rating Pro

Gas Engine Rating Pro
GERP is a PC-based program designed to provide siteperformance capabilities for Cat®natural gas enginesfor the gas compression industry. GERP providesengine data for your site's altitude, ambient temperature,fuel, engine coolant heat rejection, performance data,installation drawings, spec sheets, and pump curves.

Product Support Offered Through Global Cat Dealer

Product Support Offered Through Global Cat Dealer
More than 2,200 dealer outletsCat factory-trained dealer technicians service everyaspect of your petroleum engineCat parts and labor warrantyPreventive maintenance agreements available for repairbefore-failure optionsS•O•SSM program matches your oil and coolant samplesagainst Caterpillar set standards to determine:- Internal engine component condition- Presence of unwanted fluids- Presence of combustion by-products- Site-specific oil change interval

Over 80 Years of Engine Manufacturing Experience

Over 80 Years of Engine Manufacturing Experience
Over 60 years of natural gas engine productionOwnership of these manufacturing processes enablesCaterpillar to produce high quality, dependable products.- Cast engine blocks, heads, cylinder liners, and flywheelhousings- Machine critical components- Assemble complete engine

Web Site

Web Site
For all your petroleum power requirements, visit www.catoilandgasinfo.com

Contact

 

Please contact us for requests or advise. 

 

  • Call
  • Arrow

Request a quotation

 

250/250
Contact Close Icon - Contact Sticky Cross
  • Call
  • Arrow

CALL US

Opening hours: 08:00 - 16:00

  • Call Pon Equipment AS
    (for buyubg Cat maskines and worktools)
  •  
  • Call21 08 41 00
  •  
  • Call Pon Power AS
    (for buying Cat enginges and power supply)
  •  
  • Call23 17 05 00
  •  
  • Call Pon Rental AS
    (for renting machines and other equipment)
  •  
  • Call21 08 43 00

Email us

We will get in contact within 24 hours.

How would you like us to contact you? *
250/250

 

Fill in the form below and I will contact you as soon as possible.

 

How would you like us to contact you? *
250/250
web-monitoring-ok